Re: [PATCH v3 01/10] dt-bindings: sound: tegra: add DT binding for AHUB

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Feb 20, 2020 at 12:04:43PM +0530, Sameer Pujar wrote:
> Audio Hub (AHUB) comprises a collection of hardware accelerators for audio
> pre-processing and post-processing and a programmable full crossbar for
> audio routing across these accelerators. This patch adds YAML schema for DT
> binding of AHUB and few of its following components. These devices will be
> registered as ASoC components.
>  * ADMAIF
>  * I2S
>  * DMIC
>  * DSPK
> 
> Signed-off-by: Sameer Pujar <spujar@xxxxxxxxxx>
> ---
>  .../bindings/sound/nvidia,tegra186-dspk.yaml       |  88 +++++++++++
>  .../bindings/sound/nvidia,tegra210-admaif.yaml     | 163 +++++++++++++++++++++
>  .../bindings/sound/nvidia,tegra210-ahub.yaml       | 110 ++++++++++++++
>  .../bindings/sound/nvidia,tegra210-dmic.yaml       |  88 +++++++++++
>  .../bindings/sound/nvidia,tegra210-i2s.yaml        | 101 +++++++++++++
>  5 files changed, 550 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml
>  create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml
>  create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
>  create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml
>  create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml
> new file mode 100644
> index 0000000..79c720d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml
> @@ -0,0 +1,88 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/nvidia,tegra186-dspk.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Tegra186 DSPK Controller Device Tree Bindings
> +
> +description: |
> +  The Digital Speaker Controller (DSPK) can be viewed as a Pulse
> +  Density Modulation (PDM) transmitter that up-samples the input to
> +  the desired sampling rate by interpolation and then converts the
> +  over sampled Pulse Code Modulation (PCM) input to the desired 1-bit
> +  output via Delta Sigma Modulation (DSM).
> +
> +maintainers:
> +  - Jon Hunter <jonathanh@xxxxxxxxxx>
> +  - Sameer Pujar <spujar@xxxxxxxxxx>
> +
> +properties:
> +  $nodename:
> +    pattern: "^dspk@[0-9a-f]*$"
> +
> +  compatible:
> +    oneOf:
> +      - const: nvidia,tegra186-dspk
> +      - items:
> +          - const: nvidia,tegra194-dspk
> +          - const: nvidia,tegra186-dspk
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    description: DSPK interface clock

Needs: 

maxItems: 1

I'd drop the description too. It's pretty generic...

> +
> +  clock-names:
> +    const: dspk
> +

> +  assigned-clocks:
> +    description: DSPK interface clock
> +
> +  assigned-clock-parents:
> +    description: Parent for DSPK interface clock
> +
> +  assigned-clock-rates:
> +    description: Initial rate of DSPK interface clock

maxItems: 1 for these 3.

> +
> +  "#sound-dai-cells":
> +    const: 1
> +
> +  sound-name-prefix:
> +    pattern: "^DSPK[1-9]$"
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/string
> +    description:
> +      Used as prefix for sink/source names of the component. Must be a
> +      unique string among multiple instances of the same component.
> +      The name can be "DSPK1" or "DSPKx", where x depends on the maximum
> +      available instances on a Tegra SoC.
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - assigned-clocks
> +  - assigned-clock-parents
> +  - "#sound-dai-cells"
> +  - sound-name-prefix
> +
> +examples:
> +  - |
> +    #include<dt-bindings/clock/tegra186-clock.h>
> +
> +    dspk@2905000 {
> +        compatible = "nvidia,tegra186-dspk";
> +        reg = <0x2905000 0x100>;
> +        clocks = <&bpmp TEGRA186_CLK_DSPK1>;
> +        clock-names = "dspk";
> +        assigned-clocks = <&bpmp TEGRA186_CLK_DSPK1>;
> +        assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
> +        assigned-clock-rates = <12288000>;
> +        #sound-dai-cells = <1>;
> +        sound-name-prefix = "DSPK1";
> +    };
> +
> +...
> diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml
> new file mode 100644
> index 0000000..46637c6a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml
> @@ -0,0 +1,163 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/nvidia,tegra210-admaif.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Tegra210 ADMAIF Device Tree Bindings
> +
> +description: |
> +  ADMAIF is the interface between ADMA and AHUB. Each ADMA channel
> +  that sends/receives data to/from AHUB must interface through an
> +  ADMAIF channel. ADMA channel sending data to AHUB pairs with ADMAIF
> +  Tx channel and ADMA channel receiving data from AHUB pairs with
> +  ADMAIF Rx channel.
> +
> +maintainers:
> +  - Jon Hunter <jonathanh@xxxxxxxxxx>
> +  - Sameer Pujar <spujar@xxxxxxxxxx>
> +
> +properties:
> +  $nodename:
> +    pattern: "^admaif@[0-9a-f]*$"
> +
> +  compatible:
> +    oneOf:
> +      - enum:
> +          - nvidia,tegra210-admaif
> +          - nvidia,tegra186-admaif
> +      - items:
> +          - const: nvidia,tegra194-admaif
> +          - const: nvidia,tegra186-admaif
> +
> +  reg:
> +    maxItems: 1
> +
> +  dmas: true
> +
> +  dma-names: true
> +
> +  "#sound-dai-cells":
> +    const: 1
> +
> +if:
> +  properties:
> +    compatible:
> +      contains:
> +        const: nvidia,tegra210-admaif
> +
> +then:
> +  properties:
> +    dmas:
> +      description:
> +        DMA channel specifiers, equally divided for Tx and Rx.
> +      minItems: 1
> +      maxItems: 20
> +    dma-names:
> +      items:
> +        pattern: "^[rt]x(10|[1-9])$"
> +      description:
> +        Should be "rx1", "rx2" ... "rx10" for DMA Rx channel
> +        Should be "tx1", "tx2" ... "tx10" for DMA Tx channel
> +      minItems: 1
> +      maxItems: 20
> +
> +else:
> +  properties:
> +    dmas:
> +      description:
> +        DMA channel specifiers, equally divided for Tx and Rx.
> +      minItems: 1
> +      maxItems: 40
> +    dma-names:
> +      items:
> +        pattern: "^[rt]x(1[0-9]|[1-9]|20)$"
> +      description:
> +        Should be "rx1", "rx2" ... "rx20" for DMA Rx channel
> +        Should be "tx1", "tx2" ... "tx20" for DMA Tx channel
> +      minItems: 1
> +      maxItems: 40
> +
> +required:
> +  - compatible
> +  - reg
> +  - dmas
> +  - dma-names
> +  - "#sound-dai-cells"
> +
> +examples:
> +  - |
> +    admaif@702d0000 {
> +        compatible = "nvidia,tegra210-admaif";
> +        reg = <0x702d0000 0x800>;
> +        dmas = <&adma 1>,  <&adma 1>,
> +               <&adma 2>,  <&adma 2>,
> +               <&adma 3>,  <&adma 3>,
> +               <&adma 4>,  <&adma 4>,
> +               <&adma 5>,  <&adma 5>,
> +               <&adma 6>,  <&adma 6>,
> +               <&adma 7>,  <&adma 7>,
> +               <&adma 8>,  <&adma 8>,
> +               <&adma 9>,  <&adma 9>,
> +               <&adma 10>, <&adma 10>;
> +        dma-names = "rx1",  "tx1",
> +                    "rx2",  "tx2",
> +                    "rx3",  "tx3",
> +                    "rx4",  "tx4",
> +                    "rx5",  "tx5",
> +                    "rx6",  "tx6",
> +                    "rx7",  "tx7",
> +                    "rx8",  "tx8",
> +                    "rx9",  "tx9",
> +                    "rx10", "tx10";
> +        #sound-dai-cells = <1>;
> +    };
> +
> +  - |
> +    admaif@290f000 {
> +        compatible = "nvidia,tegra186-admaif";
> +        reg = <0x0290f000 0x1000>;
> +        dmas = <&adma 1>, <&adma 1>,
> +               <&adma 2>, <&adma 2>,
> +               <&adma 3>, <&adma 3>,
> +               <&adma 4>, <&adma 4>,
> +               <&adma 5>, <&adma 5>,
> +               <&adma 6>, <&adma 6>,
> +               <&adma 7>, <&adma 7>,
> +               <&adma 8>, <&adma 8>,
> +               <&adma 9>, <&adma 9>,
> +               <&adma 10>, <&adma 10>,
> +               <&adma 11>, <&adma 11>,
> +               <&adma 12>, <&adma 12>,
> +               <&adma 13>, <&adma 13>,
> +               <&adma 14>, <&adma 14>,
> +               <&adma 15>, <&adma 15>,
> +               <&adma 16>, <&adma 16>,
> +               <&adma 17>, <&adma 17>,
> +               <&adma 18>, <&adma 18>,
> +               <&adma 19>, <&adma 19>,
> +               <&adma 20>, <&adma 20>;
> +        dma-names = "rx1", "tx1",
> +                    "rx2", "tx2",
> +                    "rx3", "tx3",
> +                    "rx4", "tx4",
> +                    "rx5", "tx5",
> +                    "rx6", "tx6",
> +                    "rx7", "tx7",
> +                    "rx8", "tx8",
> +                    "rx9", "tx9",
> +                    "rx10", "tx10",
> +                    "rx11", "tx11",
> +                    "rx12", "tx12",
> +                    "rx13", "tx13",
> +                    "rx14", "tx14",
> +                    "rx15", "tx15",
> +                    "rx16", "tx16",
> +                    "rx17", "tx17",
> +                    "rx18", "tx18",
> +                    "rx19", "tx19",
> +                    "rx20", "tx20";
> +        #sound-dai-cells = <1>;
> +    };

I don't see a lot of value in having 2 examples.

> +
> +...
> diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
> new file mode 100644
> index 0000000..5f3e1ed
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml

Same prior comments apply here.

> @@ -0,0 +1,110 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/nvidia,tegra210-ahub.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Tegra210 AHUB Device Tree Bindings
> +
> +description: |
> +  The Audio Hub (AHUB) comprises a collection of hardware accelerators
> +  for audio pre-processing, post-processing and a programmable full
> +  crossbar for routing audio data across these accelerators. It has
> +  external interfaces such as I2S, DMIC, DSPK. It interfaces with ADMA
> +  engine through ADMAIF.
> +
> +maintainers:
> +  - Jon Hunter <jonathanh@xxxxxxxxxx>
> +  - Sameer Pujar <spujar@xxxxxxxxxx>
> +
> +properties:
> +  $nodename:
> +    pattern: "^ahub@[0-9a-f]*$"
> +
> +  compatible:
> +    oneOf:
> +      - enum:
> +          - nvidia,tegra210-ahub
> +          - nvidia,tegra186-ahub
> +      - items:
> +          - const: nvidia,tegra194-ahub
> +          - const: nvidia,tegra186-ahub
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    description: AHUB module clock
> +
> +  clock-names:
> +    const: ahub
> +
> +  assigned-clocks:
> +    description: AHUB module clock
> +
> +  assigned-clock-parents:
> +    description: parent for AHUB module clock
> +
> +  assigned-clock-rates:
> +    description: AHUB module clock rate
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 1
> +
> +  ranges:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array

ranges already has a type.

> +    description: Specify address range for the node and its children

Drop. That's every 'ranges'.

> +    minItems: 1
> +
> +  "#sound-dai-cells":
> +    const: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - assigned-clocks
> +  - assigned-clock-parents
> +  - "#address-cells"
> +  - "#size-cells"
> +  - ranges
> +  - "#sound-dai-cells"
> +
> +examples:
> +  - |
> +    #include<dt-bindings/clock/tegra210-car.h>
> +
> +    ahub@702d0800 {
> +        compatible = "nvidia,tegra210-ahub";
> +        reg = <0x702d0800 0x800>;
> +        clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
> +        clock-names = "ahub";
> +        assigned-clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
> +        assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;

> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        ranges = <0x702d0000 0x702d0000 0x0000e400>;

These properties imply you have child nodes, but none are defined.

> +        #sound-dai-cells = <1>;
> +    };
> +
> +  - |
> +    #include<dt-bindings/clock/tegra186-clock.h>
> +
> +    ahub@2900800 {
> +        compatible = "nvidia,tegra186-ahub";
> +        reg = <0x02900800 0x800>;
> +        clocks = <&bpmp TEGRA186_CLK_AHUB>;
> +        clock-names = "ahub";
> +        assigned-clocks = <&bpmp TEGRA186_CLK_AHUB>;
> +        assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        ranges = <0x02900800 0x02900800 0x11800>;
> +        #sound-dai-cells = <1>;
> +    };

Really need 2 examples?

> +
> +...

Same comments apply to the rest.



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux