On Tue, Feb 25, 2020 at 4:05 PM Nicolin Chen <nicoleotsuka@xxxxxxxxx> wrote:
>
> On Mon, Feb 24, 2020 at 08:53:25AM +0000, S.j. Wang wrote:
> > Hi
> >
> > > >
> > > > Signed-off-by: Shengjiu Wang <shengjiu.wang@xxxxxxx>
> > > > ---
> > > > sound/soc/fsl/Kconfig | 10 +
> > > > sound/soc/fsl/Makefile | 2 +
> > > > sound/soc/fsl/fsl_asrc_common.h | 1 +
> > > > sound/soc/fsl/fsl_easrc.c | 2265 +++++++++++++++++++++++++++++++
> > > > sound/soc/fsl/fsl_easrc.h | 668 +++++++++
> > > > sound/soc/fsl/fsl_easrc_dma.c | 440 ++++++
> > >
> > > I see a 90% similarity between fsl_asrc_dma and fsl_easrc_dma files.
> > > Would it be possible reuse the existing code? Could share structures from
> > > my point of view, just like it reuses "enum asrc_pair_index", I know
> > > differentiating "pair" and "context" is a big point here though.
> > >
> > > A possible quick solution for that, off the top of my head, could be:
> > >
> > > 1) in fsl_asrc_common.h
> > >
> > > struct fsl_asrc {
> > > ....
> > > };
> > >
> > > struct fsl_asrc_pair {
> > > ....
> > > };
> > >
> > > 2) in fsl_easrc.h
> > >
> > > /* Renaming shared structures */
> > > #define fsl_easrc fsl_asrc
> > > #define fsl_easrc_context fsl_asrc_pair
> > >
> > > May be a good idea to see if others have some opinion too.
> > >
> >
> > We need to modify the fsl_asrc and fsl_asrc_pair, let them
> > To be used by both driver, also we need to put the specific
> > Definition for each module to same struct, right?
>
> Yea. A merged structure if that doesn't look that bad. I see most
> of the fields in struct fsl_asrc are being reused by in fsl_easrc.
>
> > >
> > > > +static const struct regmap_config fsl_easrc_regmap_config = {
> > > > + .readable_reg = fsl_easrc_readable_reg,
> > > > + .volatile_reg = fsl_easrc_volatile_reg,
> > > > + .writeable_reg = fsl_easrc_writeable_reg,
> > >
> > > Can we use regmap_range and regmap_access_table?
> > >
> >
> > Can the regmap_range support discontinuous registers? The
> > reg_stride = 4.
>
> I think it does. Giving an example here:
> https://github.com/torvalds/linux/blob/master/drivers/mfd/da9063-i2c.c
The register in this i2c driver are continuous, from 0x00, 0x01, 0x02...
But our case is 0x00, 0x04, 0x08, does it work?
best regards
wang shengjiu
