Add dt bindings for the TLV320ADCx140 Burr-Brown ADC. The initial support is for the following: TLV320ADC3140 - http://www.ti.com/lit/gpn/tlv320adc3140 TLV320ADC5140 - http://www.ti.com/lit/gpn/tlv320adc5140 TLV320ADC6140 - http://www.ti.com/lit/gpn/tlv320adc6140 Signed-off-by: Dan Murphy <dmurphy@xxxxxx> --- no changes just a rebase on sound/for-next .../bindings/sound/tlv320adcx140.yaml | 83 +++++++++++++++++++ 1 file changed, 83 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/tlv320adcx140.yaml diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml new file mode 100644 index 000000000000..1433ff62b14f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +# Copyright (C) 2019 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/tlv320adcx140.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TLV320ADCX140 Quad Channel Analog-to-Digital Converter + +maintainers: + - Dan Murphy <dmurphy@xxxxxx> + +description: | + The TLV320ADCX140 are multichannel (4-ch analog recording or 8-ch digital + PDM microphones recording), high-performance audio, analog-to-digital + converter (ADC) with analog inputs supporting up to 2V RMS. The TLV320ADCX140 + family supports line and microphone Inputs, and offers a programmable + microphone bias or supply voltage generation. + + Specifications can be found at: + http://www.ti.com/lit/ds/symlink/tlv320adc3140.pdf + http://www.ti.com/lit/ds/symlink/tlv320adc5140.pdf + http://www.ti.com/lit/ds/symlink/tlv320adc6140.pdf + +properties: + compatible: + oneOf: + - const: ti,tlv320adc3140 + - const: ti,tlv320adc5140 + - const: ti,tlv320adc6140 + + reg: + maxItems: 1 + description: | + I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f + + reset-gpios: + description: | + GPIO used for hardware reset. + + areg-supply: + description: | + Regulator with AVDD at 3.3V. If not defined then the internal regulator + is enabled. + + ti,mic-bias-source: + description: | + Indicates the source for MIC Bias. + 0 - Mic bias is set to VREF + 1 - Mic bias is set to VREF × 1.096 + 6 - Mic bias is set to AVDD + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1, 6] + + ti,vref-source: + description: | + Indicates the source for MIC Bias. + 0 - Set VREF to 2.75V + 1 - Set VREF to 2.5V + 2 - Set VREF to 1.375V + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1, 2] + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + codec: codec@4c { + compatible = "ti,tlv320adc5140"; + reg = <0x4c>; + ti,use-internal-areg; + ti,mic-bias-source = <6>; + reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + }; + }; -- 2.25.0
