Could ensure? This change seems specific to Intel DSP based systems, at least from the description. Having looked through the core, the trigger code for a codec is seemingly always called before the trigger for the CPU. How will this work for other platforms, assuming their clocks are enabled in the CPU DAI trigger function by default? Can we always guarantee the CPU side isn't going to send anything other than 0s until after SRM has locked?
Not with the default mode for the SSP, all clocks are enabled at trigger time. We can enable the MCLK and BCLK ahead of time (which would require a change in firmware). But if we want to enable the FSYNC (word-clock), then we have to trigger DMA transfers with pretend-buffers, this is a lot more invasive.
So just to be clear, which of the MCLK, BCLK, FSYNC do you need enabled?
I think the patch is for those systems which enable I2S clocks in pcm_start instead of pcm_prepare. It has no effect on systems already be able to turn on clocks in supply widgets or set_bias_level() function. If the trigger type in the DAI link is TRIGGER_PRE, then the trigger function of FE port (component or CPU DAI) will be called before codec driver's trigger function. In this case we will be able to turn on the clock in time. However, if the trigger type is TRIGGER_POST, then the patch does not help because just like what you said, codec driver's trigger function is called first.
IIRC we recently did a change to deal with underflows. Ranjani, can you remind us what the issue was?
Thanks -Pierre _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
