Jabra Evolve 65 headset appears as if supporting lower rates than 48kHz, but it actually doesn't work but with 48kHz for playback. This patch applies a workaround to enforce the 48kHz like LINE6 devices already did. The workaround is put in a unified helper function, set_fixed_rate(), to be called from both places now. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206149 Signed-off-by: Takashi Iwai <tiwai@xxxxxxx> --- sound/usb/format.c | 33 ++++++++++++++++++++++----------- 1 file changed, 22 insertions(+), 11 deletions(-) diff --git a/sound/usb/format.c b/sound/usb/format.c index 9260136e4c9b..50cb183958bf 100644 --- a/sound/usb/format.c +++ b/sound/usb/format.c @@ -151,6 +151,19 @@ static u64 parse_audio_format_i_type(struct snd_usb_audio *chip, return pcm_formats; } +static int set_fixed_rate(struct audioformat *fp, int rate, int rate_bits) +{ + kfree(fp->rate_table); + fp->rate_table = kmalloc(sizeof(int), GFP_KERNEL); + if (!fp->rate_table) + return -ENOMEM; + fp->nr_rates = 1; + fp->rate_min = rate; + fp->rate_max = rate; + fp->rates = rate_bits; + fp->rate_table[0] = rate; + return 0; +} /* * parse the format descriptor and stores the possible sample rates @@ -223,6 +236,14 @@ static int parse_audio_format_rates_v1(struct snd_usb_audio *chip, struct audiof fp->rate_min = combine_triple(&fmt[offset + 1]); fp->rate_max = combine_triple(&fmt[offset + 4]); } + + /* Jabra Evolve 65 headset */ + if (chip->usb_id == USB_ID(0x0b0e, 0x030b)) { + /* only 48kHz for playback while keeping 16kHz for capture */ + if (fp->nr_rates != 1) + return set_fixed_rate(fp, 48000, SNDRV_PCM_RATE_48000); + } + return 0; } @@ -299,17 +320,7 @@ static int line6_parse_audio_format_rates_quirk(struct snd_usb_audio *chip, case USB_ID(0x0e41, 0x4248): /* Line6 Helix >= fw 2.82 */ case USB_ID(0x0e41, 0x4249): /* Line6 Helix Rack >= fw 2.82 */ case USB_ID(0x0e41, 0x424a): /* Line6 Helix LT >= fw 2.82 */ - /* supported rates: 48Khz */ - kfree(fp->rate_table); - fp->rate_table = kmalloc(sizeof(int), GFP_KERNEL); - if (!fp->rate_table) - return -ENOMEM; - fp->nr_rates = 1; - fp->rate_min = 48000; - fp->rate_max = 48000; - fp->rates = SNDRV_PCM_RATE_48000; - fp->rate_table[0] = 48000; - return 0; + return set_fixed_rate(fp, 48000, SNDRV_PCM_RATE_48000); } return -ENODEV; -- 2.16.4 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
