On Thu, Jan 30, 2020 at 04:03:34PM +0530, Sameer Pujar wrote: > Audio Hub (AHUB) comprises a collection of hardware accelerators for audio > pre-processing and post-processing and a programmable full crossbar for > audio routing across these accelerators. This patch adds YAML schema for DT > binding of AHUB and few of its following components. These devices will be > registered as ASoC components. > * ADMAIF > * I2S > * DMIC > * DSPK > > Signed-off-by: Sameer Pujar <spujar@xxxxxxxxxx> > --- > .../bindings/sound/nvidia,tegra186-dspk.yaml | 105 +++++++++++++ > .../bindings/sound/nvidia,tegra210-admaif.yaml | 165 +++++++++++++++++++++ > .../bindings/sound/nvidia,tegra210-ahub.yaml | 130 ++++++++++++++++ > .../bindings/sound/nvidia,tegra210-dmic.yaml | 105 +++++++++++++ > .../bindings/sound/nvidia,tegra210-i2s.yaml | 112 ++++++++++++++ > 5 files changed, 617 insertions(+) > create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml > create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml > create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml > create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml > create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml > > diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml > new file mode 100644 > index 0000000..dc9fef3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml > @@ -0,0 +1,105 @@ > +# SPDX-License-Identifier: (GPL-2.0) Dual license new bindings: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/sound/nvidia,tegra186-dspk.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Tegra186 DSPK Controller Device Tree Bindings > + > +description: | > + The Digital Speaker Controller (DSPK) can be viewed as a Pulse > + Density Modulation (PDM) transmitter that up-samples the input to > + the desired sampling rate by interpolation and then converts the > + over sampled Pulse Code Modulation (PCM) input to the desired 1-bit > + output via Delta Sigma Modulation (DSM). > + > +maintainers: > + - Jon Hunter <jonathanh@xxxxxxxxxx> > + - Sameer Pujar <spujar@xxxxxxxxxx> > + > +properties: > + compatible: > + oneOf: > + - items: Drop 'items' for a single entry. > + const: nvidia,tegra186-dspk > + - items: > + - enum: > + - nvidia,tegra194-dspk > + - enum: > + - nvidia,tegra186-dspk This can be a 'const' > + > + reg: > + description: offset and length of the register set for the device. That's every 'reg'. Drop. > + maxItems: 1 > + > + clocks: > + description: must contain an entry for each entry in clock-names. > + See ../clocks/clocks-bindings.txt for details. > + minItems: 1 Drop description and minItems. minItems is implied by the length of 'items'. > + items: > + - description: Module clock > + > + clock-names: > + description: must contain clock names for each corresponding entry in clocks. > + See ../clocks/clocks-bindings.txt for details. > + minItems: 1 ditto > + items: > + - const: dspk > + > + assigned-clocks: > + description: list of input clocks and dividers for the audio system. > + See ../clocks/clock-bindings.txt for details. > + minItems: 1 ditto > + items: > + - description: Module clock > + > + assigned-clock-parents: > + description: parent clock for each entry in assigned-clocks > + See ../clocks/clock-bindings.txt for details. > + minItems: 1 ditto > + items: > + - description: Parent for module clock > + > + assigned-clock-rates: > + description: clock rate for each entry in assigned-clocks > + See ../clocks/clock-bindings.txt for details. ditto > + items: > + - description: initial module clock rate > + > + "#sound-dai-cells": > + const: 1 > + > + sound-name-prefix: > + $ref: /schemas/types.yaml#/definitions/string > + description: > + Used as prefix for sink/source names of the component. Must be a > + unique string among multiple instances of the same component. > + The name can be "DSPK1" or "DSPKx", where x depends on the maximum Sounds like a constraint. > + available instances on a Tegra SoC. > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - assigned-clocks > + - assigned-clock-parents > + - "#sound-dai-cells" > + > +examples: > + - | > + #include<dt-bindings/clock/tegra186-clock.h> > + > + tegra_dspk1: dspk@2905000 { > + compatible = "nvidia,tegra186-dspk"; > + reg = <0x2905000 0x100>; > + clocks = <&bpmp TEGRA186_CLK_DSPK1>; > + clock-names = "dspk"; > + assigned-clocks = <&bpmp TEGRA186_CLK_DSPK1>; > + assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>; > + assigned-clock-rates = <12288000>; > + #sound-dai-cells = <1>; > + sound-name-prefix = "DSPK1"; > + }; > + > +... > diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml > new file mode 100644 > index 0000000..a8a41ba > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml > @@ -0,0 +1,165 @@ > +# SPAT-License-Identifier: (GPL-2.0) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/sound/nvidia,tegra210-admaif.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Tegra210 ADMAIF Device Tree Bindings > + > +description: | > + ADMAIF is the interface between ADMA and AHUB. Each ADMA channel > + that sends/receives data to/from AHUB must interface through an > + ADMAIF channel. ADMA channel sending data to AHUB pairs with ADMAIF > + Tx channel and ADMA channel receiving data from AHUB pairs with > + ADMAIF Rx channel. > + > +maintainers: > + - Jon Hunter <jonathanh@xxxxxxxxxx> > + - Sameer Pujar <spujar@xxxxxxxxxx> > + > +properties: > + compatible: > + oneOf: > + - items: > + const: nvidia,tegra210-admaif > + - items: > + const: nvidia,tegra186-admaif These 2 can be a single enum. > + - items: > + - enum: > + - nvidia,tegra194-admaif > + - enum: > + - nvidia,tegra186-admaif > + > + reg: > + maxItems: 1 > + > + dmas: true > + > + dma-names: true > + > + "#sound-dai-cells": > + const: 1 > + > +if: > + properties: > + compatible: > + contains: > + const: nvidia,tegra210-admaif > + > +then: > + properties: > + dmas: > + $ref: /schemas/types.yaml#/definitions/phandle-array Drop. Common properties already have a type. Plus this is wrong. A '$ref' means all other keywords are ignored (until we move to draft8). > + description: > + Two or more DMA channel specifiers, equally divided for Tx and Rx. > + minItems: 2 > + maxItems: 20 > + dma-names: > + $ref: /schemas/types.yaml#/definitions/string-array drop > + description: > + There must be at least one channel named "tx1" for transmit and "rx1" > + for receive. If more channels need to be specified then "tx1", > + "tx2" ... "tx10" can be used. Similarly for Rx channels as well. Sounds like constraints. Stopping there. Similar issues on the rest... _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
