From: Vanitha Channaiah <vanitha.channaiah@xxxxxxxxxxxx>
For buffer size equal to two period size, the start position
of slave_hw_ptr is rounded down in order to avoid xruns
For e.g.:
Considering below parameters and its values:
Period size = 96 (0x60)
Buffer size = 192 (0xC0)
Timer ticks = 1
avail_min = 0x60
slave_hw_ptr = unaligned value during dmix_start()
Issue:
- Initial, app_ptr = hw_ptr = 0
- Application fills buffer size of data. so app_ptr = 0xC0, hw_ptr = 0
- During dmix_start(), current slave_hw_ptr is not rounded down. current slave_hw_ptr would be 0x66
- slave_hw_ptr is keep on updating at the hardware 0x67, 0x68, 0x69
- The diff calculation between old_slave_hw_ptr(0x66) and new_slave_hw_ptr(0x69)
results in avail = 0x6
- After 1 snd_pcm_period_elapsed(), slave_hw_ptr = 0xC0
- The result of avail = 0x5A which is less than avail_min(0x60)
- Here, xruns will be observed
Fix:
- Initial, app_ptr = hw_ptr = 0
- Application fills buffer size of data. so app_ptr = 0xC0, hw_ptr = 0
- Round down of slave_hw_ptr during dmix_start() leads to below calculation:
- During dmix_start(), slave_hw_ptr rounded to 0x60 (old slave_hw_ptr)
- The diff calculation between old_slave_hw_ptr(0x60) and new_slave_hw_ptr(0x69)
results in avail = 0x9
- After 1 snd_pcm_period_elapsed(), slave_hw_ptr = 0xC0
- The result of avail = 0x60 which is avail_min(0x60)
- Here, xruns can be avoided
Signed-off-by: Vanitha Channaiah <vanitha.channaiah@xxxxxxxxxxxx>
diff --git a/src/pcm/pcm_direct.c b/src/pcm/pcm_direct.c
index 54d9900..a201fa3 100644
--- a/src/pcm/pcm_direct.c
+++ b/src/pcm/pcm_direct.c
@@ -2043,10 +2043,14 @@ int snd_pcm_direct_parse_open_conf(snd_config_t *root, snd_config_t *conf,
void snd_pcm_direct_reset_slave_ptr(snd_pcm_t *pcm, snd_pcm_direct_t *dmix)
{
+ /*
+ * For buffer size equal to two period size, slave_hw_ptr is rounded down
+ * to avoid xruns
+ */
if (dmix->hw_ptr_alignment == SND_PCM_HW_PTR_ALIGNMENT_ROUNDUP ||
(dmix->hw_ptr_alignment == SND_PCM_HW_PTR_ALIGNMENT_AUTO &&
- pcm->buffer_size <= pcm->period_size * 2))
+ pcm->buffer_size < pcm->period_size * 2))
dmix->slave_appl_ptr =
((dmix->slave_appl_ptr + dmix->slave_period_size - 1) /
dmix->slave_period_size) * dmix->slave_period_size;
--
2.7.4
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
