Applied "ASoC: rt1015: add rt1015 amplifier driver" to the asoc tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch

   ASoC: rt1015: add rt1015 amplifier driver

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.6

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From df31007400c3905ec15b1065241baf3864decbfa Mon Sep 17 00:00:00 2001
From: Jack Yu <jack.yu@xxxxxxxxxxx>
Date: Wed, 15 Jan 2020 19:25:19 +0800
Subject: [PATCH] ASoC: rt1015: add rt1015 amplifier driver

This is initial amplifier driver for rt1015.

Signed-off-by: Jack Yu <jack.yu@xxxxxxxxxxx>
Link: https://lore.kernel.org/r/20200115112519.22050-1-jack.yu@xxxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
 .../devicetree/bindings/sound/rt1015.txt      |  17 +
 sound/soc/codecs/Kconfig                      |   6 +
 sound/soc/codecs/Makefile                     |   2 +
 sound/soc/codecs/rt1015.c                     | 993 ++++++++++++++++++
 sound/soc/codecs/rt1015.h                     | 375 +++++++
 5 files changed, 1393 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/rt1015.txt
 create mode 100644 sound/soc/codecs/rt1015.c
 create mode 100644 sound/soc/codecs/rt1015.h

diff --git a/Documentation/devicetree/bindings/sound/rt1015.txt b/Documentation/devicetree/bindings/sound/rt1015.txt
new file mode 100644
index 000000000000..fcfd02d8d32f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt1015.txt
@@ -0,0 +1,17 @@
+RT1015 Mono Class D Audio Amplifier
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt1015".
+
+- reg : The I2C address of the device.
+
+
+Example:
+
+rt1015: codec@28 {
+	compatible = "realtek,rt1015";
+	reg = <0x28>;
+};
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 52c51a9c5505..c9eb683bd1b0 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -151,6 +151,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_RT286 if I2C
 	select SND_SOC_RT298 if I2C
 	select SND_SOC_RT1011 if I2C
+	select SND_SOC_RT1015 if I2C
 	select SND_SOC_RT1305 if I2C
 	select SND_SOC_RT1308 if I2C
 	select SND_SOC_RT5514 if I2C
@@ -970,6 +971,7 @@ config SND_SOC_RL6231
 	default y if SND_SOC_RT5677=y
 	default y if SND_SOC_RT5682=y
 	default y if SND_SOC_RT1011=y
+	default y if SND_SOC_RT1015=y
 	default y if SND_SOC_RT1305=y
 	default y if SND_SOC_RT1308=y
 	default m if SND_SOC_RT5514=m
@@ -986,6 +988,7 @@ config SND_SOC_RL6231
 	default m if SND_SOC_RT5677=m
 	default m if SND_SOC_RT5682=m
 	default m if SND_SOC_RT1011=m
+	default m if SND_SOC_RT1015=m
 	default m if SND_SOC_RT1305=m
 	default m if SND_SOC_RT1308=m
 
@@ -1013,6 +1016,9 @@ config SND_SOC_RT298
 config SND_SOC_RT1011
 	tristate
 
+config SND_SOC_RT1015
+	tristate
+
 config SND_SOC_RT1305
 	tristate
 
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index 7bd87a6371cf..ba1b4b3fa2da 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -154,6 +154,7 @@ snd-soc-rk3328-objs := rk3328_codec.o
 snd-soc-rl6231-objs := rl6231.o
 snd-soc-rl6347a-objs := rl6347a.o
 snd-soc-rt1011-objs := rt1011.o
+snd-soc-rt1015-objs := rt1015.o
 snd-soc-rt1305-objs := rt1305.o
 snd-soc-rt1308-objs := rt1308.o
 snd-soc-rt1308-sdw-objs := rt1308-sdw.o
@@ -451,6 +452,7 @@ obj-$(CONFIG_SND_SOC_RK3328)	+= snd-soc-rk3328.o
 obj-$(CONFIG_SND_SOC_RL6231)	+= snd-soc-rl6231.o
 obj-$(CONFIG_SND_SOC_RL6347A)	+= snd-soc-rl6347a.o
 obj-$(CONFIG_SND_SOC_RT1011)	+= snd-soc-rt1011.o
+obj-$(CONFIG_SND_SOC_RT1015)	+= snd-soc-rt1015.o
 obj-$(CONFIG_SND_SOC_RT1305)	+= snd-soc-rt1305.o
 obj-$(CONFIG_SND_SOC_RT1308)	+= snd-soc-rt1308.o
 obj-$(CONFIG_SND_SOC_RT1308_SDW)	+= snd-soc-rt1308-sdw.o
diff --git a/sound/soc/codecs/rt1015.c b/sound/soc/codecs/rt1015.c
new file mode 100644
index 000000000000..4a9c5b54008f
--- /dev/null
+++ b/sound/soc/codecs/rt1015.c
@@ -0,0 +1,993 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// rt1015.c  --  RT1015 ALSA SoC audio amplifier driver
+//
+// Copyright 2019 Realtek Semiconductor Corp.
+//
+// Author: Jack Yu <jack.yu@xxxxxxxxxxx>
+//
+//
+
+#include <linux/fs.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/firmware.h>
+#include <linux/gpio.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "rl6231.h"
+#include "rt1015.h"
+
+static const struct reg_default rt1015_reg[] = {
+	{ 0x0000, 0x0000 },
+	{ 0x0004, 0xa000 },
+	{ 0x0006, 0x0003 },
+	{ 0x000a, 0x0802 },
+	{ 0x000c, 0x0020 },
+	{ 0x000e, 0x0000 },
+	{ 0x0010, 0x0000 },
+	{ 0x0012, 0x0000 },
+	{ 0x0020, 0x8000 },
+	{ 0x0022, 0x471b },
+	{ 0x006a, 0x0000 },
+	{ 0x006c, 0x4020 },
+	{ 0x0076, 0x0000 },
+	{ 0x0078, 0x0000 },
+	{ 0x007a, 0x0000 },
+	{ 0x007c, 0x10ec },
+	{ 0x007d, 0x1015 },
+	{ 0x00f0, 0x5000 },
+	{ 0x00f2, 0x0774 },
+	{ 0x00f3, 0x8400 },
+	{ 0x00f4, 0x0000 },
+	{ 0x0100, 0x0028 },
+	{ 0x0102, 0xff02 },
+	{ 0x0104, 0x8232 },
+	{ 0x0106, 0x200c },
+	{ 0x010c, 0x002f },
+	{ 0x010e, 0xc000 },
+	{ 0x0111, 0x0200 },
+	{ 0x0112, 0x0400 },
+	{ 0x0114, 0x0022 },
+	{ 0x0116, 0x0000 },
+	{ 0x0118, 0x0000 },
+	{ 0x011a, 0x0123 },
+	{ 0x011c, 0x4567 },
+	{ 0x0300, 0xdddd },
+	{ 0x0302, 0x0000 },
+	{ 0x0311, 0x9330 },
+	{ 0x0313, 0x0000 },
+	{ 0x0314, 0x0000 },
+	{ 0x031a, 0x00a0 },
+	{ 0x031c, 0x001f },
+	{ 0x031d, 0xffff },
+	{ 0x031e, 0x0000 },
+	{ 0x031f, 0x0000 },
+	{ 0x0321, 0x0000 },
+	{ 0x0322, 0x0000 },
+	{ 0x0328, 0x0000 },
+	{ 0x0329, 0x0000 },
+	{ 0x032a, 0x0000 },
+	{ 0x032b, 0x0000 },
+	{ 0x032c, 0x0000 },
+	{ 0x032d, 0x0000 },
+	{ 0x032e, 0x030e },
+	{ 0x0330, 0x0080 },
+	{ 0x0332, 0x0034 },
+	{ 0x0334, 0x0000 },
+	{ 0x0336, 0x0000 },
+	{ 0x0506, 0x04ff },
+	{ 0x0508, 0x0030 },
+	{ 0x050a, 0x0018 },
+	{ 0x0519, 0x307f },
+	{ 0x051a, 0xffff },
+	{ 0x051b, 0x4000 },
+	{ 0x051d, 0x0000 },
+	{ 0x051f, 0x0000 },
+	{ 0x0536, 0x1000 },
+	{ 0x0538, 0x0000 },
+	{ 0x053a, 0x0000 },
+	{ 0x053c, 0x0000 },
+	{ 0x053d, 0x0000 },
+	{ 0x053e, 0x0000 },
+	{ 0x053f, 0x0000 },
+	{ 0x0540, 0x0000 },
+	{ 0x0541, 0x0000 },
+	{ 0x0542, 0x0000 },
+	{ 0x0543, 0x0000 },
+	{ 0x0544, 0x0000 },
+	{ 0x0568, 0x0000 },
+	{ 0x056a, 0x0000 },
+	{ 0x1000, 0x0000 },
+	{ 0x1002, 0x6505 },
+	{ 0x1006, 0x5515 },
+	{ 0x1007, 0x003f },
+	{ 0x1009, 0x770f },
+	{ 0x100a, 0x01ff },
+	{ 0x100c, 0x0000 },
+	{ 0x100d, 0x0003 },
+	{ 0x1010, 0xa433 },
+	{ 0x1020, 0x0000 },
+	{ 0x1200, 0x3d02 },
+	{ 0x1202, 0x0813 },
+	{ 0x1204, 0x0211 },
+	{ 0x1206, 0x0000 },
+	{ 0x1208, 0x0000 },
+	{ 0x120a, 0x0000 },
+	{ 0x120c, 0x0000 },
+	{ 0x120e, 0x0000 },
+	{ 0x1210, 0x0000 },
+	{ 0x1212, 0x0000 },
+	{ 0x1300, 0x0701 },
+	{ 0x1302, 0x12f9 },
+	{ 0x1304, 0x3405 },
+	{ 0x1305, 0x0844 },
+	{ 0x1306, 0x1611 },
+	{ 0x1308, 0x555e },
+	{ 0x130a, 0x0000 },
+	{ 0x130c, 0x2400},
+	{ 0x130e, 0x7700 },
+	{ 0x130f, 0x0000 },
+	{ 0x1310, 0x0000 },
+	{ 0x1312, 0x0000 },
+	{ 0x1314, 0x0000 },
+	{ 0x1316, 0x0000 },
+	{ 0x1318, 0x0000 },
+	{ 0x131a, 0x0000 },
+	{ 0x1322, 0x0029 },
+	{ 0x1323, 0x4a52 },
+	{ 0x1324, 0x002c },
+	{ 0x1325, 0x0b02 },
+	{ 0x1326, 0x002d },
+	{ 0x1327, 0x6b5a },
+	{ 0x1328, 0x002e },
+	{ 0x1329, 0xcbb2 },
+	{ 0x132a, 0x0030 },
+	{ 0x132b, 0x2c0b },
+	{ 0x1330, 0x0031 },
+	{ 0x1331, 0x8c63 },
+	{ 0x1332, 0x0032 },
+	{ 0x1333, 0xecbb },
+	{ 0x1334, 0x0034 },
+	{ 0x1335, 0x4d13 },
+	{ 0x1336, 0x0037 },
+	{ 0x1337, 0x0dc3 },
+	{ 0x1338, 0x003d },
+	{ 0x1339, 0xef7b },
+	{ 0x133a, 0x0044 },
+	{ 0x133b, 0xd134 },
+	{ 0x133c, 0x0047 },
+	{ 0x133d, 0x91e4 },
+	{ 0x133e, 0x004d },
+	{ 0x133f, 0xc370 },
+	{ 0x1340, 0x0053 },
+	{ 0x1341, 0xf4fd },
+	{ 0x1342, 0x0060 },
+	{ 0x1343, 0x5816 },
+	{ 0x1344, 0x006c },
+	{ 0x1345, 0xbb2e },
+	{ 0x1346, 0x0072 },
+	{ 0x1347, 0xecbb },
+	{ 0x1348, 0x0076 },
+	{ 0x1349, 0x5d97 },
+};
+
+static bool rt1015_volatile_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case RT1015_RESET:
+	case RT1015_CLK_DET:
+	case RT1015_SIL_DET:
+	case RT1015_VER_ID:
+	case RT1015_VENDOR_ID:
+	case RT1015_DEVICE_ID:
+	case RT1015_PRO_ALT:
+	case RT1015_DAC3:
+	case RT1015_VBAT_TEST_OUT1:
+	case RT1015_VBAT_TEST_OUT2:
+	case RT1015_VBAT_PROT_ATT:
+	case RT1015_VBAT_DET_CODE:
+	case RT1015_SMART_BST_CTRL1:
+	case RT1015_SPK_DC_DETECT1:
+	case RT1015_SPK_DC_DETECT4:
+	case RT1015_SPK_DC_DETECT5:
+	case RT1015_DC_CALIB_CLSD1:
+	case RT1015_DC_CALIB_CLSD5:
+	case RT1015_DC_CALIB_CLSD6:
+	case RT1015_DC_CALIB_CLSD7:
+	case RT1015_DC_CALIB_CLSD8:
+	case RT1015_S_BST_TIMING_INTER1:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+static bool rt1015_readable_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case RT1015_RESET:
+	case RT1015_CLK2:
+	case RT1015_CLK3:
+	case RT1015_PLL1:
+	case RT1015_PLL2:
+	case RT1015_CLK_DET:
+	case RT1015_SIL_DET:
+	case RT1015_CUSTOMER_ID:
+	case RT1015_PCODE_FWVER:
+	case RT1015_VER_ID:
+	case RT1015_VENDOR_ID:
+	case RT1015_DEVICE_ID:
+	case RT1015_PAD_DRV1:
+	case RT1015_PAD_DRV2:
+	case RT1015_GAT_BOOST:
+	case RT1015_PRO_ALT:
+	case RT1015_MAN_I2C:
+	case RT1015_DAC1:
+	case RT1015_DAC2:
+	case RT1015_DAC3:
+	case RT1015_ADC1:
+	case RT1015_ADC2:
+	case RT1015_TDM_MASTER:
+	case RT1015_TDM_TCON:
+	case RT1015_TDM1_1:
+	case RT1015_TDM1_2:
+	case RT1015_TDM1_3:
+	case RT1015_TDM1_4:
+	case RT1015_TDM1_5:
+	case RT1015_MIXER1:
+	case RT1015_MIXER2:
+	case RT1015_ANA_PROTECT1:
+	case RT1015_ANA_CTRL_SEQ1:
+	case RT1015_ANA_CTRL_SEQ2:
+	case RT1015_VBAT_DET_DEB:
+	case RT1015_VBAT_VOLT_DET1:
+	case RT1015_VBAT_VOLT_DET2:
+	case RT1015_VBAT_TEST_OUT1:
+	case RT1015_VBAT_TEST_OUT2:
+	case RT1015_VBAT_PROT_ATT:
+	case RT1015_VBAT_DET_CODE:
+	case RT1015_PWR1:
+	case RT1015_PWR4:
+	case RT1015_PWR5:
+	case RT1015_PWR6:
+	case RT1015_PWR7:
+	case RT1015_PWR8:
+	case RT1015_PWR9:
+	case RT1015_CLASSD_SEQ:
+	case RT1015_SMART_BST_CTRL1:
+	case RT1015_SMART_BST_CTRL2:
+	case RT1015_ANA_CTRL1:
+	case RT1015_ANA_CTRL2:
+	case RT1015_SPK_VOL:
+	case RT1015_SHORT_DETTOP1:
+	case RT1015_SHORT_DETTOP2:
+	case RT1015_SPK_DC_DETECT1:
+	case RT1015_SPK_DC_DETECT2:
+	case RT1015_SPK_DC_DETECT3:
+	case RT1015_SPK_DC_DETECT4:
+	case RT1015_SPK_DC_DETECT5:
+	case RT1015_BAT_RPO_STEP1:
+	case RT1015_BAT_RPO_STEP2:
+	case RT1015_BAT_RPO_STEP3:
+	case RT1015_BAT_RPO_STEP4:
+	case RT1015_BAT_RPO_STEP5:
+	case RT1015_BAT_RPO_STEP6:
+	case RT1015_BAT_RPO_STEP7:
+	case RT1015_BAT_RPO_STEP8:
+	case RT1015_BAT_RPO_STEP9:
+	case RT1015_BAT_RPO_STEP10:
+	case RT1015_BAT_RPO_STEP11:
+	case RT1015_BAT_RPO_STEP12:
+	case RT1015_SPREAD_SPEC1:
+	case RT1015_SPREAD_SPEC2:
+	case RT1015_PAD_STATUS:
+	case RT1015_PADS_PULLING_CTRL1:
+	case RT1015_PADS_DRIVING:
+	case RT1015_SYS_RST1:
+	case RT1015_SYS_RST2:
+	case RT1015_SYS_GATING1:
+	case RT1015_TEST_MODE1:
+	case RT1015_TEST_MODE2:
+	case RT1015_TIMING_CTRL1:
+	case RT1015_PLL_INT:
+	case RT1015_TEST_OUT1:
+	case RT1015_DC_CALIB_CLSD1:
+	case RT1015_DC_CALIB_CLSD2:
+	case RT1015_DC_CALIB_CLSD3:
+	case RT1015_DC_CALIB_CLSD4:
+	case RT1015_DC_CALIB_CLSD5:
+	case RT1015_DC_CALIB_CLSD6:
+	case RT1015_DC_CALIB_CLSD7:
+	case RT1015_DC_CALIB_CLSD8:
+	case RT1015_DC_CALIB_CLSD9:
+	case RT1015_DC_CALIB_CLSD10:
+	case RT1015_CLSD_INTERNAL1:
+	case RT1015_CLSD_INTERNAL2:
+	case RT1015_CLSD_INTERNAL3:
+	case RT1015_CLSD_INTERNAL4:
+	case RT1015_CLSD_INTERNAL5:
+	case RT1015_CLSD_INTERNAL6:
+	case RT1015_CLSD_INTERNAL7:
+	case RT1015_CLSD_INTERNAL8:
+	case RT1015_CLSD_INTERNAL9:
+	case RT1015_CLSD_OCP_CTRL:
+	case RT1015_VREF_LV:
+	case RT1015_MBIAS1:
+	case RT1015_MBIAS2:
+	case RT1015_MBIAS3:
+	case RT1015_MBIAS4:
+	case RT1015_VREF_LV1:
+	case RT1015_S_BST_TIMING_INTER1:
+	case RT1015_S_BST_TIMING_INTER2:
+	case RT1015_S_BST_TIMING_INTER3:
+	case RT1015_S_BST_TIMING_INTER4:
+	case RT1015_S_BST_TIMING_INTER5:
+	case RT1015_S_BST_TIMING_INTER6:
+	case RT1015_S_BST_TIMING_INTER7:
+	case RT1015_S_BST_TIMING_INTER8:
+	case RT1015_S_BST_TIMING_INTER9:
+	case RT1015_S_BST_TIMING_INTER10:
+	case RT1015_S_BST_TIMING_INTER11:
+	case RT1015_S_BST_TIMING_INTER12:
+	case RT1015_S_BST_TIMING_INTER13:
+	case RT1015_S_BST_TIMING_INTER14:
+	case RT1015_S_BST_TIMING_INTER15:
+	case RT1015_S_BST_TIMING_INTER16:
+	case RT1015_S_BST_TIMING_INTER17:
+	case RT1015_S_BST_TIMING_INTER18:
+	case RT1015_S_BST_TIMING_INTER19:
+	case RT1015_S_BST_TIMING_INTER20:
+	case RT1015_S_BST_TIMING_INTER21:
+	case RT1015_S_BST_TIMING_INTER22:
+	case RT1015_S_BST_TIMING_INTER23:
+	case RT1015_S_BST_TIMING_INTER24:
+	case RT1015_S_BST_TIMING_INTER25:
+	case RT1015_S_BST_TIMING_INTER26:
+	case RT1015_S_BST_TIMING_INTER27:
+	case RT1015_S_BST_TIMING_INTER28:
+	case RT1015_S_BST_TIMING_INTER29:
+	case RT1015_S_BST_TIMING_INTER30:
+	case RT1015_S_BST_TIMING_INTER31:
+	case RT1015_S_BST_TIMING_INTER32:
+	case RT1015_S_BST_TIMING_INTER33:
+	case RT1015_S_BST_TIMING_INTER34:
+	case RT1015_S_BST_TIMING_INTER35:
+	case RT1015_S_BST_TIMING_INTER36:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -9525, 75, 0);
+
+static const char * const rt1015_din_source_select[] = {
+	"Left",
+	"Right",
+	"Left + Right average",
+};
+
+static SOC_ENUM_SINGLE_DECL(rt1015_mono_lr_sel, RT1015_PAD_DRV2, 4,
+	rt1015_din_source_select);
+
+static const char * const rt1015_boost_mode[] = {
+	"Bypass", "Adaptive", "Fixed Adaptive"
+};
+
+static const SOC_ENUM_SINGLE_DECL(rt1015_boost_mode_enum, 0, 0,
+	rt1015_boost_mode);
+
+static int rt1015_boost_mode_get(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component =
+		snd_soc_kcontrol_component(kcontrol);
+	struct rt1015_priv *rt1015 =
+		snd_soc_component_get_drvdata(component);
+
+	ucontrol->value.integer.value[0] = rt1015->boost_mode;
+
+	return 0;
+}
+
+static int rt1015_boost_mode_put(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component =
+		snd_soc_kcontrol_component(kcontrol);
+	struct rt1015_priv *rt1015 =
+		snd_soc_component_get_drvdata(component);
+
+	rt1015->boost_mode = ucontrol->value.integer.value[0];
+
+	switch (rt1015->boost_mode) {
+	case BYPASS:
+		snd_soc_component_update_bits(component,
+			RT1015_SMART_BST_CTRL1, RT1015_ABST_AUTO_EN_MASK |
+			RT1015_ABST_FIX_TGT_MASK | RT1015_BYPASS_SWR_REG_MASK,
+			RT1015_ABST_REG_MODE | RT1015_ABST_FIX_TGT_DIS |
+			RT1015_BYPASS_SWRREG_BYPASS);
+		break;
+	case ADAPTIVE:
+		snd_soc_component_update_bits(component,
+			RT1015_SMART_BST_CTRL1, RT1015_ABST_AUTO_EN_MASK |
+			RT1015_ABST_FIX_TGT_MASK | RT1015_BYPASS_SWR_REG_MASK,
+			RT1015_ABST_AUTO_MODE | RT1015_ABST_FIX_TGT_DIS |
+			RT1015_BYPASS_SWRREG_PASS);
+		break;
+	case FIXED_ADAPTIVE:
+		snd_soc_component_update_bits(component,
+			RT1015_SMART_BST_CTRL1, RT1015_ABST_AUTO_EN_MASK |
+			RT1015_ABST_FIX_TGT_MASK | RT1015_BYPASS_SWR_REG_MASK,
+			RT1015_ABST_AUTO_MODE | RT1015_ABST_FIX_TGT_EN |
+			RT1015_BYPASS_SWRREG_PASS);
+		break;
+	default:
+		dev_err(component->dev, "Unknown boost control.\n");
+	}
+
+	return 0;
+}
+
+static int rt5518_bypass_boost_get(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component =
+		snd_soc_kcontrol_component(kcontrol);
+	struct rt1015_priv *rt1015 =
+		snd_soc_component_get_drvdata(component);
+
+	ucontrol->value.integer.value[0] = rt1015->bypass_boost;
+
+	return 0;
+}
+
+static int rt5518_bypass_boost_put(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component =
+		snd_soc_kcontrol_component(kcontrol);
+	struct rt1015_priv *rt1015 =
+		snd_soc_component_get_drvdata(component);
+
+	if (!rt1015->dac_is_used) {
+		rt1015->bypass_boost = ucontrol->value.integer.value[0];
+		if (rt1015->bypass_boost == 1) {
+			snd_soc_component_write(component,
+				RT1015_PWR4, 0x00b2);
+			snd_soc_component_write(component,
+				RT1015_CLSD_INTERNAL8, 0x2008);
+			snd_soc_component_write(component,
+				RT1015_CLSD_INTERNAL9, 0x0140);
+			snd_soc_component_write(component,
+				RT1015_GAT_BOOST, 0x00fe);
+			snd_soc_component_write(component,
+				RT1015_PWR_STATE_CTRL, 0x000d);
+			msleep(500);
+			snd_soc_component_write(component,
+				RT1015_PWR_STATE_CTRL, 0x000e);
+		}
+	} else
+		dev_err(component->dev, "DAC is being used!\n");
+
+	return 0;
+}
+
+static const struct snd_kcontrol_new rt1015_snd_controls[] = {
+	SOC_SINGLE_TLV("DAC Playback Volume", RT1015_DAC1, RT1015_DAC_VOL_SFT,
+		127, 0, dac_vol_tlv),
+	SOC_DOUBLE("DAC Playback Switch", RT1015_DAC3,
+		RT1015_DA_MUTE_SFT, RT1015_DVOL_MUTE_FLAG_SFT, 1, 1),
+	SOC_ENUM_EXT("Boost Mode", rt1015_boost_mode_enum,
+		rt1015_boost_mode_get, rt1015_boost_mode_put),
+	SOC_ENUM("Mono LR Select", rt1015_mono_lr_sel),
+	SOC_SINGLE_EXT("Bypass Boost", SND_SOC_NOPM, 0, 1, 0,
+		rt5518_bypass_boost_get, rt5518_bypass_boost_put),
+};
+
+static int rt1015_is_sys_clk_from_pll(struct snd_soc_dapm_widget *source,
+			 struct snd_soc_dapm_widget *sink)
+{
+	struct snd_soc_component *component =
+		snd_soc_dapm_to_component(source->dapm);
+	struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component);
+
+	if (rt1015->sysclk_src == RT1015_SCLK_S_PLL)
+		return 1;
+	else
+		return 0;
+}
+
+static int r1015_dac_event(struct snd_soc_dapm_widget *w,
+	struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *component =
+		snd_soc_dapm_to_component(w->dapm);
+	struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component);
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		rt1015->dac_is_used = 1;
+		if (rt1015->bypass_boost == 0) {
+			snd_soc_component_write(component,
+				RT1015_SYS_RST1, 0x05f7);
+			snd_soc_component_write(component,
+				RT1015_GAT_BOOST, 0xacfe);
+			snd_soc_component_write(component,
+				RT1015_PWR9, 0xaa00);
+			snd_soc_component_write(component,
+				RT1015_GAT_BOOST, 0xecfe);
+		} else {
+			snd_soc_component_write(component,
+				RT1015_SYS_RST1, 0x05f7);
+			snd_soc_component_write(component,
+				RT1015_PWR_STATE_CTRL, 0x026e);
+		}
+		break;
+
+	case SND_SOC_DAPM_POST_PMD:
+		if (rt1015->bypass_boost == 0) {
+			snd_soc_component_write(component,
+				RT1015_PWR9, 0xa800);
+			snd_soc_component_write(component,
+				RT1015_SYS_RST1, 0x05f5);
+		} else {
+			snd_soc_component_write(component,
+				RT1015_PWR_STATE_CTRL, 0x0268);
+			snd_soc_component_write(component,
+				RT1015_SYS_RST1, 0x05f5);
+		}
+		rt1015->dac_is_used = 0;
+		break;
+
+	default:
+		break;
+	}
+	return 0;
+}
+
+static const struct snd_soc_dapm_widget rt1015_dapm_widgets[] = {
+	SND_SOC_DAPM_SUPPLY("LDO2", RT1015_PWR1, RT1015_PWR_LDO2_BIT, 0,
+		NULL, 0),
+	SND_SOC_DAPM_SUPPLY("INT RC CLK", RT1015_PWR1, RT1015_PWR_INTCLK_BIT,
+		0, NULL, 0),
+	SND_SOC_DAPM_SUPPLY("ISENSE", RT1015_PWR1, RT1015_PWR_ISENSE_BIT, 0,
+		NULL, 0),
+	SND_SOC_DAPM_SUPPLY("VSENSE", RT1015_PWR1, RT1015_PWR_VSENSE_BIT, 0,
+		NULL, 0),
+	SND_SOC_DAPM_SUPPLY("PLL", RT1015_PWR1, RT1015_PWR_PLL_BIT, 0,
+		NULL, 0),
+	SND_SOC_DAPM_SUPPLY("BG1 BG2", RT1015_PWR1, RT1015_PWR_BG_1_2_BIT, 0,
+		NULL, 0),
+	SND_SOC_DAPM_SUPPLY("MBIAS BG", RT1015_PWR1, RT1015_PWR_MBIAS_BG_BIT, 0,
+		NULL, 0),
+	SND_SOC_DAPM_SUPPLY("VBAT", RT1015_PWR1, RT1015_PWR_VBAT_BIT, 0, NULL,
+		0),
+	SND_SOC_DAPM_SUPPLY("MBIAS", RT1015_PWR1, RT1015_PWR_MBIAS_BIT, 0,
+		NULL, 0),
+	SND_SOC_DAPM_SUPPLY("ADCV", RT1015_PWR1, RT1015_PWR_ADCV_BIT, 0, NULL,
+		0),
+	SND_SOC_DAPM_SUPPLY("MIXERV", RT1015_PWR1, RT1015_PWR_MIXERV_BIT, 0,
+		NULL, 0),
+	SND_SOC_DAPM_SUPPLY("SUMV", RT1015_PWR1, RT1015_PWR_SUMV_BIT, 0, NULL,
+		0),
+	SND_SOC_DAPM_SUPPLY("VREFLV", RT1015_PWR1, RT1015_PWR_VREFLV_BIT, 0,
+		NULL, 0),
+
+	SND_SOC_DAPM_AIF_IN("AIFRX", "AIF Playback", 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_DAC_E("DAC", NULL, RT1015_PWR1, RT1015_PWR_DAC_BIT, 0,
+		r1015_dac_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+
+	SND_SOC_DAPM_OUTPUT("SPO"),
+};
+
+static const struct snd_soc_dapm_route rt1015_dapm_routes[] = {
+	{ "DAC", NULL, "AIFRX" },
+	{ "DAC", NULL, "LDO2" },
+	{ "DAC", NULL, "PLL", rt1015_is_sys_clk_from_pll},
+	{ "DAC", NULL, "INT RC CLK" },
+	{ "DAC", NULL, "ISENSE" },
+	{ "DAC", NULL, "VSENSE" },
+	{ "DAC", NULL, "BG1 BG2" },
+	{ "DAC", NULL, "MBIAS BG" },
+	{ "DAC", NULL, "VBAT" },
+	{ "DAC", NULL, "MBIAS" },
+	{ "DAC", NULL, "ADCV" },
+	{ "DAC", NULL, "MIXERV" },
+	{ "DAC", NULL, "SUMV" },
+	{ "DAC", NULL, "VREFLV" },
+	{ "SPO", NULL, "DAC" },
+};
+
+static int rt1015_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component);
+	int pre_div, bclk_ms, frame_size;
+	unsigned int val_len = 0;
+
+	rt1015->lrck = params_rate(params);
+	pre_div = rl6231_get_clk_info(rt1015->sysclk, rt1015->lrck);
+	if (pre_div < 0) {
+		dev_err(component->dev, "Unsupported clock rate\n");
+		return -EINVAL;
+	}
+
+	frame_size = snd_soc_params_to_frame_size(params);
+	if (frame_size < 0) {
+		dev_err(component->dev, "Unsupported frame size: %d\n",
+			frame_size);
+		return -EINVAL;
+	}
+
+	bclk_ms = frame_size > 32;
+	rt1015->bclk = rt1015->lrck * (32 << bclk_ms);
+
+	dev_dbg(component->dev, "bclk_ms is %d and pre_div is %d for iis %d\n",
+				bclk_ms, pre_div, dai->id);
+
+	dev_dbg(component->dev, "lrck is %dHz and pre_div is %d for iis %d\n",
+				rt1015->lrck, pre_div, dai->id);
+
+	switch (params_width(params)) {
+	case 16:
+		break;
+	case 20:
+		val_len = RT1015_I2S_DL_20;
+		break;
+	case 24:
+		val_len = RT1015_I2S_DL_24;
+		break;
+	case 8:
+		val_len = RT1015_I2S_DL_8;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	snd_soc_component_update_bits(component, RT1015_TDM_MASTER,
+		RT1015_I2S_DL_MASK, val_len);
+	snd_soc_component_update_bits(component, RT1015_CLK2,
+		RT1015_FS_PD_MASK, pre_div);
+
+	return 0;
+}
+
+static int rt1015_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+	struct snd_soc_component *component = dai->component;
+	unsigned int reg_val = 0, reg_val2 = 0;
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		reg_val |= RT1015_TCON_TDM_MS_M;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		reg_val |= RT1015_TCON_TDM_MS_S;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		reg_val2 |= RT1015_TDM_INV_BCLK;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		break;
+
+	case SND_SOC_DAIFMT_LEFT_J:
+		reg_val |= RT1015_I2S_M_DF_LEFT;
+		break;
+
+	case SND_SOC_DAIFMT_DSP_A:
+		reg_val |= RT1015_I2S_M_DF_PCM_A;
+		break;
+
+	case SND_SOC_DAIFMT_DSP_B:
+		reg_val |= RT1015_I2S_M_DF_PCM_B;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	snd_soc_component_update_bits(component, RT1015_TDM_MASTER,
+			RT1015_TCON_TDM_MS_MASK | RT1015_I2S_M_DF_MASK,
+			reg_val);
+	snd_soc_component_update_bits(component, RT1015_TDM1_1,
+			RT1015_TDM_INV_BCLK_MASK, reg_val2);
+
+	return 0;
+}
+
+static int rt1015_set_component_sysclk(struct snd_soc_component *component,
+		int clk_id, int source, unsigned int freq, int dir)
+{
+	struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component);
+	unsigned int reg_val = 0;
+
+	if (freq == rt1015->sysclk && clk_id == rt1015->sysclk_src)
+		return 0;
+
+	switch (clk_id) {
+	case RT1015_SCLK_S_MCLK:
+		reg_val |= RT1015_CLK_SYS_PRE_SEL_MCLK;
+		break;
+
+	case RT1015_SCLK_S_PLL:
+		reg_val |= RT1015_CLK_SYS_PRE_SEL_PLL;
+		break;
+
+	default:
+		dev_err(component->dev, "Invalid clock id (%d)\n", clk_id);
+		return -EINVAL;
+	}
+
+	rt1015->sysclk = freq;
+	rt1015->sysclk_src = clk_id;
+
+	dev_dbg(component->dev, "Sysclk is %dHz and clock id is %d\n",
+		freq, clk_id);
+
+	snd_soc_component_update_bits(component, RT1015_CLK2,
+			RT1015_CLK_SYS_PRE_SEL_MASK, reg_val);
+
+	return 0;
+}
+
+static int rt1015_set_component_pll(struct snd_soc_component *component,
+		int pll_id, int source, unsigned int freq_in,
+		unsigned int freq_out)
+{
+	struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component);
+	struct rl6231_pll_code pll_code;
+	int ret;
+
+	if (!freq_in || !freq_out) {
+		dev_dbg(component->dev, "PLL disabled\n");
+
+		rt1015->pll_in = 0;
+		rt1015->pll_out = 0;
+
+		return 0;
+	}
+
+	if (source == rt1015->pll_src && freq_in == rt1015->pll_in &&
+		freq_out == rt1015->pll_out)
+		return 0;
+
+	switch (source) {
+	case RT1015_PLL_S_MCLK:
+		snd_soc_component_update_bits(component, RT1015_CLK2,
+			RT1015_PLL_SEL_MASK, RT1015_PLL_SEL_PLL_SRC2);
+		break;
+
+	case RT1015_PLL_S_BCLK:
+		snd_soc_component_update_bits(component, RT1015_CLK2,
+			RT1015_PLL_SEL_MASK, RT1015_PLL_SEL_BCLK);
+		break;
+
+	default:
+		dev_err(component->dev, "Unknown PLL Source %d\n", source);
+		return -EINVAL;
+	}
+
+	ret = rl6231_pll_calc(freq_in, freq_out, &pll_code);
+	if (ret < 0) {
+		dev_err(component->dev, "Unsupport input clock %d\n", freq_in);
+		return ret;
+	}
+
+	dev_dbg(component->dev, "bypass=%d m=%d n=%d k=%d\n",
+		pll_code.m_bp, (pll_code.m_bp ? 0 : pll_code.m_code),
+		pll_code.n_code, pll_code.k_code);
+
+	snd_soc_component_write(component, RT1015_PLL1,
+		(pll_code.m_bp ? 0 : pll_code.m_code) << RT1015_PLL_M_SFT |
+		pll_code.m_bp << RT1015_PLL_M_BP_SFT | pll_code.n_code);
+	snd_soc_component_write(component, RT1015_PLL2,
+		pll_code.k_code);
+
+	rt1015->pll_in = freq_in;
+	rt1015->pll_out = freq_out;
+	rt1015->pll_src = source;
+
+	return 0;
+}
+
+static int rt1015_probe(struct snd_soc_component *component)
+{
+	struct rt1015_priv *rt1015 =
+		snd_soc_component_get_drvdata(component);
+
+	rt1015->component = component;
+	snd_soc_component_write(component, RT1015_BAT_RPO_STEP1, 0x061c);
+
+	return 0;
+}
+
+static void rt1015_remove(struct snd_soc_component *component)
+{
+	struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component);
+
+	regmap_write(rt1015->regmap, RT1015_RESET, 0);
+}
+
+#define RT1015_STEREO_RATES SNDRV_PCM_RATE_8000_192000
+#define RT1015_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
+			SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S8)
+
+struct snd_soc_dai_ops rt1015_aif_dai_ops = {
+	.hw_params = rt1015_hw_params,
+	.set_fmt = rt1015_set_dai_fmt,
+};
+
+struct snd_soc_dai_driver rt1015_dai[] = {
+	{
+		.name = "rt1015-aif",
+		.id = 0,
+		.playback = {
+			.stream_name = "AIF Playback",
+			.channels_min = 1,
+			.channels_max = 4,
+			.rates = RT1015_STEREO_RATES,
+			.formats = RT1015_FORMATS,
+		},
+	}
+};
+
+#ifdef CONFIG_PM
+static int rt1015_suspend(struct snd_soc_component *component)
+{
+	struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component);
+
+	regcache_cache_only(rt1015->regmap, true);
+	regcache_mark_dirty(rt1015->regmap);
+
+	return 0;
+}
+
+static int rt1015_resume(struct snd_soc_component *component)
+{
+	struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component);
+
+	regcache_cache_only(rt1015->regmap, false);
+	regcache_sync(rt1015->regmap);
+	return 0;
+}
+#else
+#define rt1015_suspend NULL
+#define rt1015_resume NULL
+#endif
+
+static const struct snd_soc_component_driver soc_component_dev_rt1015 = {
+	.probe = rt1015_probe,
+	.remove = rt1015_remove,
+	.suspend = rt1015_suspend,
+	.resume = rt1015_resume,
+	.controls = rt1015_snd_controls,
+	.num_controls = ARRAY_SIZE(rt1015_snd_controls),
+	.dapm_widgets = rt1015_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(rt1015_dapm_widgets),
+	.dapm_routes = rt1015_dapm_routes,
+	.num_dapm_routes = ARRAY_SIZE(rt1015_dapm_routes),
+	.set_sysclk = rt1015_set_component_sysclk,
+	.set_pll = rt1015_set_component_pll,
+	.use_pmdown_time	= 1,
+	.endianness		= 1,
+	.non_legacy_dai_naming	= 1,
+};
+
+static const struct regmap_config rt1015_regmap = {
+	.reg_bits = 16,
+	.val_bits = 16,
+	.max_register = RT1015_S_BST_TIMING_INTER36,
+	.volatile_reg = rt1015_volatile_register,
+	.readable_reg = rt1015_readable_register,
+	.cache_type = REGCACHE_RBTREE,
+	.reg_defaults = rt1015_reg,
+	.num_reg_defaults = ARRAY_SIZE(rt1015_reg),
+};
+
+static const struct i2c_device_id rt1015_i2c_id[] = {
+	{ "rt1015", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, rt1015_i2c_id);
+
+#if defined(CONFIG_OF)
+static const struct of_device_id rt1015_of_match[] = {
+	{ .compatible = "realtek,rt1015", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, rt1015_of_match);
+#endif
+
+#ifdef CONFIG_ACPI
+static struct acpi_device_id rt1015_acpi_match[] = {
+	{"10EC1015", 0,},
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, rt1015_acpi_match);
+#endif
+
+static int rt1015_i2c_probe(struct i2c_client *i2c,
+	const struct i2c_device_id *id)
+{
+	struct rt1015_priv *rt1015;
+	int ret;
+	unsigned int val;
+
+	rt1015 = devm_kzalloc(&i2c->dev, sizeof(struct rt1015_priv),
+				GFP_KERNEL);
+	if (rt1015 == NULL)
+		return -ENOMEM;
+
+	i2c_set_clientdata(i2c, rt1015);
+
+	rt1015->regmap = devm_regmap_init_i2c(i2c, &rt1015_regmap);
+	if (IS_ERR(rt1015->regmap)) {
+		ret = PTR_ERR(rt1015->regmap);
+		dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	regmap_read(rt1015->regmap, RT1015_DEVICE_ID, &val);
+	if ((val != RT1015_DEVICE_ID_VAL) && (val != RT1015_DEVICE_ID_VAL2)) {
+		dev_err(&i2c->dev,
+			"Device with ID register %x is not rt1015\n", val);
+		return -ENODEV;
+	}
+
+	return devm_snd_soc_register_component(&i2c->dev,
+		&soc_component_dev_rt1015,
+		rt1015_dai, ARRAY_SIZE(rt1015_dai));
+}
+
+static void rt1015_i2c_shutdown(struct i2c_client *client)
+{
+	struct rt1015_priv *rt1015 = i2c_get_clientdata(client);
+
+	regmap_write(rt1015->regmap, RT1015_RESET, 0);
+}
+
+static struct i2c_driver rt1015_i2c_driver = {
+	.driver = {
+		.name = "rt1015",
+		.of_match_table = of_match_ptr(rt1015_of_match),
+		.acpi_match_table = ACPI_PTR(rt1015_acpi_match),
+	},
+	.probe = rt1015_i2c_probe,
+	.shutdown = rt1015_i2c_shutdown,
+	.id_table = rt1015_i2c_id,
+};
+module_i2c_driver(rt1015_i2c_driver);
+
+MODULE_DESCRIPTION("ASoC RT1015 driver");
+MODULE_AUTHOR("Jack Yu <jack.yu@xxxxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/codecs/rt1015.h b/sound/soc/codecs/rt1015.h
new file mode 100644
index 000000000000..ef3745a4faae
--- /dev/null
+++ b/sound/soc/codecs/rt1015.h
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// rt1015.h  --  RT1015 ALSA SoC audio amplifier driver
+//
+// Copyright 2019 Realtek Semiconductor Corp.
+// Author: Jack Yu <jack.yu@xxxxxxxxxxx>
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License version 2 as
+// published by the Free Software Foundation.
+//
+
+#ifndef __RT1015_H__
+#define __RT1015_H__
+
+#define RT1015_DEVICE_ID_VAL			0x1011
+#define RT1015_DEVICE_ID_VAL2			0x1015
+
+#define RT1015_RESET				0x0000
+#define RT1015_CLK2				0x0004
+#define RT1015_CLK3				0x0006
+#define RT1015_PLL1				0x000a
+#define RT1015_PLL2				0x000c
+#define RT1015_CLK_DET				0x0020
+#define RT1015_SIL_DET				0x0022
+#define RT1015_CUSTOMER_ID			0x0076
+#define RT1015_PCODE_FWVER			0x0078
+#define RT1015_VER_ID				0x007a
+#define RT1015_VENDOR_ID			0x007c
+#define RT1015_DEVICE_ID			0x007d
+#define RT1015_PAD_DRV1				0x00f0
+#define RT1015_PAD_DRV2				0x00f2
+#define RT1015_GAT_BOOST			0x00f3
+#define RT1015_PRO_ALT				0x00f4
+#define RT1015_MAN_I2C				0x0100
+#define RT1015_DAC1				0x0102
+#define RT1015_DAC2				0x0104
+#define RT1015_DAC3				0x0106
+#define RT1015_ADC1				0x010c
+#define RT1015_ADC2				0x010e
+#define RT1015_TDM_MASTER			0x0111
+#define RT1015_TDM_TCON				0x0112
+#define RT1015_TDM1_1				0x0114
+#define RT1015_TDM1_2				0x0116
+#define RT1015_TDM1_3				0x0118
+#define RT1015_TDM1_4				0x011a
+#define RT1015_TDM1_5				0x011c
+#define RT1015_MIXER1				0x0300
+#define RT1015_MIXER2				0x0302
+#define RT1015_ANA_PROTECT1			0x0311
+#define RT1015_ANA_CTRL_SEQ1			0x0313
+#define RT1015_ANA_CTRL_SEQ2			0x0314
+#define RT1015_VBAT_DET_DEB			0x031a
+#define RT1015_VBAT_VOLT_DET1			0x031c
+#define RT1015_VBAT_VOLT_DET2			0x031d
+#define RT1015_VBAT_TEST_OUT1			0x031e
+#define RT1015_VBAT_TEST_OUT2			0x031f
+#define RT1015_VBAT_PROT_ATT			0x0320
+#define RT1015_VBAT_DET_CODE			0x0321
+#define RT1015_PWR1				0x0322
+#define RT1015_PWR4				0x0328
+#define RT1015_PWR5				0x0329
+#define RT1015_PWR6				0x032a
+#define RT1015_PWR7				0x032b
+#define RT1015_PWR8				0x032c
+#define RT1015_PWR9				0x032d
+#define RT1015_CLASSD_SEQ			0x032e
+#define RT1015_SMART_BST_CTRL1			0x0330
+#define RT1015_SMART_BST_CTRL2			0x0332
+#define RT1015_ANA_CTRL1			0x0334
+#define RT1015_ANA_CTRL2			0x0336
+#define RT1015_PWR_STATE_CTRL			0x0338
+#define RT1015_SPK_VOL				0x0506
+#define RT1015_SHORT_DETTOP1			0x0508
+#define RT1015_SHORT_DETTOP2			0x050a
+#define RT1015_SPK_DC_DETECT1			0x0519
+#define RT1015_SPK_DC_DETECT2			0x051a
+#define RT1015_SPK_DC_DETECT3			0x051b
+#define RT1015_SPK_DC_DETECT4			0x051d
+#define RT1015_SPK_DC_DETECT5			0x051f
+#define RT1015_BAT_RPO_STEP1			0x0536
+#define RT1015_BAT_RPO_STEP2			0x0538
+#define RT1015_BAT_RPO_STEP3			0x053a
+#define RT1015_BAT_RPO_STEP4			0x053c
+#define RT1015_BAT_RPO_STEP5			0x053d
+#define RT1015_BAT_RPO_STEP6			0x053e
+#define RT1015_BAT_RPO_STEP7			0x053f
+#define RT1015_BAT_RPO_STEP8			0x0540
+#define RT1015_BAT_RPO_STEP9			0x0541
+#define RT1015_BAT_RPO_STEP10			0x0542
+#define RT1015_BAT_RPO_STEP11			0x0543
+#define RT1015_BAT_RPO_STEP12			0x0544
+#define RT1015_SPREAD_SPEC1			0x0568
+#define RT1015_SPREAD_SPEC2			0x056a
+#define RT1015_PAD_STATUS			0x1000
+#define RT1015_PADS_PULLING_CTRL1		0x1002
+#define RT1015_PADS_DRIVING			0x1006
+#define RT1015_SYS_RST1				0x1007
+#define RT1015_SYS_RST2				0x1009
+#define RT1015_SYS_GATING1			0x100a
+#define RT1015_TEST_MODE1			0x100c
+#define RT1015_TEST_MODE2			0x100d
+#define RT1015_TIMING_CTRL1			0x100e
+#define RT1015_PLL_INT				0x1010
+#define RT1015_TEST_OUT1			0x1020
+#define RT1015_DC_CALIB_CLSD1			0x1200
+#define RT1015_DC_CALIB_CLSD2			0x1202
+#define RT1015_DC_CALIB_CLSD3			0x1204
+#define RT1015_DC_CALIB_CLSD4			0x1206
+#define RT1015_DC_CALIB_CLSD5			0x1208
+#define RT1015_DC_CALIB_CLSD6			0x120a
+#define RT1015_DC_CALIB_CLSD7			0x120c
+#define RT1015_DC_CALIB_CLSD8			0x120e
+#define RT1015_DC_CALIB_CLSD9			0x1210
+#define RT1015_DC_CALIB_CLSD10			0x1212
+#define RT1015_CLSD_INTERNAL1			0x1300
+#define RT1015_CLSD_INTERNAL2			0x1302
+#define RT1015_CLSD_INTERNAL3			0x1304
+#define RT1015_CLSD_INTERNAL4			0x1305
+#define RT1015_CLSD_INTERNAL5			0x1306
+#define RT1015_CLSD_INTERNAL6			0x1308
+#define RT1015_CLSD_INTERNAL7			0x130a
+#define RT1015_CLSD_INTERNAL8			0x130c
+#define RT1015_CLSD_INTERNAL9			0x130e
+#define RT1015_CLSD_OCP_CTRL			0x130f
+#define RT1015_VREF_LV				0x1310
+#define RT1015_MBIAS1				0x1312
+#define RT1015_MBIAS2				0x1314
+#define RT1015_MBIAS3				0x1316
+#define RT1015_MBIAS4				0x1318
+#define RT1015_VREF_LV1				0x131a
+#define RT1015_S_BST_TIMING_INTER1		0x1322
+#define RT1015_S_BST_TIMING_INTER2		0x1323
+#define RT1015_S_BST_TIMING_INTER3		0x1324
+#define RT1015_S_BST_TIMING_INTER4		0x1325
+#define RT1015_S_BST_TIMING_INTER5		0x1326
+#define RT1015_S_BST_TIMING_INTER6		0x1327
+#define RT1015_S_BST_TIMING_INTER7		0x1328
+#define RT1015_S_BST_TIMING_INTER8		0x1329
+#define RT1015_S_BST_TIMING_INTER9		0x132a
+#define RT1015_S_BST_TIMING_INTER10		0x132b
+#define RT1015_S_BST_TIMING_INTER11		0x1330
+#define RT1015_S_BST_TIMING_INTER12		0x1331
+#define RT1015_S_BST_TIMING_INTER13		0x1332
+#define RT1015_S_BST_TIMING_INTER14		0x1333
+#define RT1015_S_BST_TIMING_INTER15		0x1334
+#define RT1015_S_BST_TIMING_INTER16		0x1335
+#define RT1015_S_BST_TIMING_INTER17		0x1336
+#define RT1015_S_BST_TIMING_INTER18		0x1337
+#define RT1015_S_BST_TIMING_INTER19		0x1338
+#define RT1015_S_BST_TIMING_INTER20		0x1339
+#define RT1015_S_BST_TIMING_INTER21		0x133a
+#define RT1015_S_BST_TIMING_INTER22		0x133b
+#define RT1015_S_BST_TIMING_INTER23		0x133c
+#define RT1015_S_BST_TIMING_INTER24		0x133d
+#define RT1015_S_BST_TIMING_INTER25		0x133e
+#define RT1015_S_BST_TIMING_INTER26		0x133f
+#define RT1015_S_BST_TIMING_INTER27		0x1340
+#define RT1015_S_BST_TIMING_INTER28		0x1341
+#define RT1015_S_BST_TIMING_INTER29		0x1342
+#define RT1015_S_BST_TIMING_INTER30		0x1343
+#define RT1015_S_BST_TIMING_INTER31		0x1344
+#define RT1015_S_BST_TIMING_INTER32		0x1345
+#define RT1015_S_BST_TIMING_INTER33		0x1346
+#define RT1015_S_BST_TIMING_INTER34		0x1347
+#define RT1015_S_BST_TIMING_INTER35		0x1348
+#define RT1015_S_BST_TIMING_INTER36		0x1349
+
+/* 0x0004 */
+#define RT1015_CLK_SYS_PRE_SEL_MASK		(0x3 << 14)
+#define RT1015_CLK_SYS_PRE_SEL_SFT		14
+#define RT1015_CLK_SYS_PRE_SEL_MCLK		(0x0 << 14)
+#define RT1015_CLK_SYS_PRE_SEL_PLL		(0x2 << 14)
+#define RT1015_PLL_SEL_MASK			(0x1 << 13)
+#define RT1015_PLL_SEL_SFT			13
+#define RT1015_PLL_SEL_PLL_SRC2			(0x0 << 13)
+#define RT1015_PLL_SEL_BCLK			(0x1 << 13)
+#define RT1015_FS_PD_MASK			(0x7 << 4)
+#define RT1015_FS_PD_SFT			4
+
+/* 0x000a */
+#define RT1015_PLL_M_MAX			0xf
+#define RT1015_PLL_M_MASK			(RT1015_PLL_M_MAX << 12)
+#define RT1015_PLL_M_SFT			12
+#define RT1015_PLL_M_BP				(0x1 << 11)
+#define RT1015_PLL_M_BP_SFT			11
+#define RT1015_PLL_N_MAX			0x1ff
+#define RT1015_PLL_N_MASK			(RT1015_PLL_N_MAX << 0)
+#define RT1015_PLL_N_SFT			0
+
+/* 0x000c */
+#define RT1015_PLL_BPK_MASK			(0x1 << 5)
+#define RT1015_PLL_BPK				(0x0 << 5)
+#define RT1015_PLL_K_MAX			0x1f
+#define RT1015_PLL_K_MASK			(RT1015_PLL_K_MAX)
+#define RT1015_PLL_K_SFT			0
+
+/* 0x007a */
+#define RT1015_ID_MASK				0xff
+#define RT1015_ID_VERA				0x0
+#define RT1015_ID_VERB				0x1
+
+/* 0x0102 */
+#define RT1015_DAC_VOL_MASK			(0x7f << 9)
+#define RT1015_DAC_VOL_SFT			9
+
+/* 0x0104 */
+#define RT1015_DAC_CLK				(0x1 << 13)
+#define RT1015_DAC_CLK_BIT			13
+
+/* 0x0106 */
+#define RT1015_DAC_MUTE_MASK			(0x1 << 15)
+#define RT1015_DA_MUTE_SFT			15
+#define RT1015_DVOL_MUTE_FLAG_SFT		12
+
+/* 0x0111 */
+#define RT1015_TCON_TDM_MS_MASK			(0x1 << 14)
+#define RT1015_TCON_TDM_MS_SFT			14
+#define RT1015_TCON_TDM_MS_S			(0x0 << 14)
+#define RT1015_TCON_TDM_MS_M			(0x1 << 14)
+#define RT1015_I2S_DL_MASK			(0x7 << 8)
+#define RT1015_I2S_DL_SFT			8
+#define RT1015_I2S_DL_16			(0x0 << 8)
+#define RT1015_I2S_DL_20			(0x1 << 8)
+#define RT1015_I2S_DL_24			(0x2 << 8)
+#define RT1015_I2S_DL_8				(0x3 << 8)
+#define RT1015_I2S_M_DF_MASK			(0x7 << 0)
+#define RT1015_I2S_M_DF_SFT			0
+#define RT1015_I2S_M_DF_I2S			(0x0)
+#define RT1015_I2S_M_DF_LEFT			(0x1)
+#define RT1015_I2S_M_DF_PCM_A			(0x2)
+#define RT1015_I2S_M_DF_PCM_B			(0x3)
+#define RT1015_I2S_M_DF_PCM_A_N			(0x6)
+#define RT1015_I2S_M_DF_PCM_B_N			(0x7)
+
+/* TDM_tcon Setting (0x0112) */
+#define RT1015_I2S_TCON_DF_MASK			(0x7 << 13)
+#define RT1015_I2S_TCON_DF_SFT			13
+#define RT1015_I2S_TCON_DF_I2S			(0x0 << 13)
+#define RT1015_I2S_TCON_DF_LEFT			(0x1 << 13)
+#define RT1015_I2S_TCON_DF_PCM_A		(0x2 << 13)
+#define RT1015_I2S_TCON_DF_PCM_B		(0x3 << 13)
+#define RT1015_I2S_TCON_DF_PCM_A_N		(0x6 << 13)
+#define RT1015_I2S_TCON_DF_PCM_B_N		(0x7 << 13)
+#define RT1015_TCON_BCLK_SEL_MASK		(0x3 << 10)
+#define RT1015_TCON_BCLK_SEL_SFT		10
+#define RT1015_TCON_BCLK_SEL_32FS		(0x0 << 10)
+#define RT1015_TCON_BCLK_SEL_64FS		(0x1 << 10)
+#define RT1015_TCON_BCLK_SEL_128FS		(0x2 << 10)
+#define RT1015_TCON_BCLK_SEL_256FS		(0x3 << 10)
+#define RT1015_TCON_CH_LEN_MASK			(0x3 << 5)
+#define RT1015_TCON_CH_LEN_SFT			5
+#define RT1015_TCON_CH_LEN_16B			(0x0 << 5)
+#define RT1015_TCON_CH_LEN_20B			(0x1 << 5)
+#define RT1015_TCON_CH_LEN_24B			(0x2 << 5)
+#define RT1015_TCON_CH_LEN_32B			(0x3 << 5)
+#define RT1015_TCON_BCLK_MST_MASK			(0x1 << 4)
+#define RT1015_TCON_BCLK_MST_SFT			4
+#define RT1015_TCON_BCLK_MST_INV		(0x1 << 4)
+
+/* TDM1 Setting-1 (0x0114) */
+#define RT1015_TDM_INV_BCLK_MASK		(0x1 << 15)
+#define RT1015_TDM_INV_BCLK_SFT			15
+#define RT1015_TDM_INV_BCLK			(0x1 << 15)
+
+/* 0x0330 */
+#define RT1015_ABST_AUTO_EN_MASK		(0x1 << 13)
+#define RT1015_ABST_AUTO_MODE			(0x1 << 13)
+#define RT1015_ABST_REG_MODE			(0x0 << 13)
+#define RT1015_ABST_FIX_TGT_MASK		(0x1 << 12)
+#define RT1015_ABST_FIX_TGT_EN			(0x1 << 12)
+#define RT1015_ABST_FIX_TGT_DIS			(0x0 << 12)
+#define RT1015_BYPASS_SWR_REG_MASK		(0x1 << 7)
+#define RT1015_BYPASS_SWRREG_BYPASS		(0x1 << 7)
+#define RT1015_BYPASS_SWRREG_PASS		(0x0 << 7)
+
+/* 0x0322 */
+#define RT1015_PWR_LDO2				(0x1 << 15)
+#define RT1015_PWR_LDO2_BIT			15
+#define RT1015_PWR_DAC				(0x1 << 14)
+#define RT1015_PWR_DAC_BIT			14
+#define RT1015_PWR_INTCLK			(0x1 << 13)
+#define RT1015_PWR_INTCLK_BIT			13
+#define RT1015_PWR_ISENSE			(0x1 << 12)
+#define RT1015_PWR_ISENSE_BIT			12
+#define RT1015_PWR_VSENSE			(0x1 << 10)
+#define RT1015_PWR_VSENSE_BIT			10
+#define RT1015_PWR_PLL				(0x1 << 9)
+#define RT1015_PWR_PLL_BIT			9
+#define RT1015_PWR_BG_1_2			(0x1 << 8)
+#define RT1015_PWR_BG_1_2_BIT			8
+#define RT1015_PWR_MBIAS_BG			(0x1 << 7)
+#define RT1015_PWR_MBIAS_BG_BIT			7
+#define RT1015_PWR_VBAT				(0x1 << 6)
+#define RT1015_PWR_VBAT_BIT			6
+#define RT1015_PWR_MBIAS			(0x1 << 4)
+#define RT1015_PWR_MBIAS_BIT			4
+#define RT1015_PWR_ADCV				(0x1 << 3)
+#define RT1015_PWR_ADCV_BIT			3
+#define RT1015_PWR_MIXERV			(0x1 << 2)
+#define RT1015_PWR_MIXERV_BIT			2
+#define RT1015_PWR_SUMV				(0x1 << 1)
+#define RT1015_PWR_SUMV_BIT			1
+#define RT1015_PWR_VREFLV			(0x1 << 0)
+#define RT1015_PWR_VREFLV_BIT			0
+
+/* 0x0324 */
+#define RT1015_PWR_BASIC			(0x1 << 15)
+#define RT1015_PWR_BASIC_BIT			15
+#define RT1015_PWR_SD				(0x1 << 14)
+#define RT1015_PWR_SD_BIT			14
+#define RT1015_PWR_IBIAS			(0x1 << 13)
+#define RT1015_PWR_IBIAS_BIT			13
+#define RT1015_PWR_VCM				(0x1 << 11)
+#define RT1015_PWR_VCM_BIT			11
+
+/* 0x0328 */
+#define RT1015_PWR_SWR				(0x1 << 12)
+#define RT1015_PWR_SWR_BIT			12
+
+/* 0x1300 */
+#define RT1015_PWR_CLSD				(0x1 << 12)
+#define RT1015_PWR_CLSD_BIT			12
+
+/* 0x007a */
+#define RT1015_ID_MASK				0xff
+#define RT1015_ID_VERA				0x0
+#define RT1015_ID_VERB				0x1
+
+/* System Clock Source */
+enum {
+	RT1015_SCLK_S_MCLK,
+	RT1015_SCLK_S_PLL,
+};
+
+/* PLL1 Source */
+enum {
+	RT1015_PLL_S_MCLK,
+	RT1015_PLL_S_BCLK,
+};
+
+enum {
+	RT1015_AIF1,
+	RT1015_AIFS,
+};
+
+enum {
+	RT1015_VERA,
+	RT1015_VERB,
+};
+
+enum {
+	BYPASS,
+	ADAPTIVE,
+	FIXED_ADAPTIVE,
+};
+
+struct rt1015_priv {
+	struct snd_soc_component *component;
+	struct regmap *regmap;
+	int sysclk;
+	int sysclk_src;
+	int lrck;
+	int bclk;
+	int id;
+	int pll_src;
+	int pll_in;
+	int pll_out;
+	int boost_mode;
+	int bypass_boost;
+	int amp_ver;
+	int dac_is_used;
+};
+
+#endif /* __RT1015_H__ */
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux