Hi.
Setting the ADC48K44K greatly improves capture quality at 48k sampling rate.
With this bit clear ADC does ZOH interpolation of every 22th sample at 48k.
At frequencies higher than 48k there ADC performs a little better with
ADC48K44K bit set.
At 44.1k ADC performs a little better with this bit clear.
At frequencies below 44.1k there is no difference.
Regards,
Tim.
Signed-off-by: Timofei Bondarenko <tim@xxxxxxxxx>
--- alsa-driver-hg20071107/alsa-kernel/pci/cmipci.c 2007-11-01 04:00:07.000000000 +0300
+++ alsa-driver/alsa-kernel/pci/cmipci.c 2007-11-07 14:55:05.000000000 +0300
@@ -869,6 +869,13 @@ static int snd_cmipci_pcm_prepare(struct
snd_cmipci_write(cm, CM_REG_CHFORMAT, val);
//snd_printd("cmipci: chformat = %08x\n", val);
+ if (!rec->is_dac && cm->chip_version) {
+ if (runtime->rate > 44100)
+ snd_cmipci_set_bit(cm, CM_REG_EXT_MISC, CM_ADC48K44K);
+ else
+ snd_cmipci_clear_bit(cm, CM_REG_EXT_MISC, CM_ADC48K44K);
+ }
+
rec->running = 0;
spin_unlock_irq(&cm->reg_lock);
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
