Re: [PATCH 3/4] ASoC: msm8916-wcd-analog: Simplify MIC BIAS Internal

Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> · Tue, 14 Jan 2020 10:54:44 +0000

On 11/01/2020 16:40, Stephan Gerhold wrote:
At the moment, MIC BIAS Internal* and MIC BIAS External* both reference
the same register, and have a part of their initialization sequence
duplicated.

In general, the sequence for enabling MIC BIAS InternalX seems to be:
   1. Enable MIC BIAS ExternalX
   2. Enable internal RBIAS resistor

Does not sound correct to me.

What external means here is if the MICBIAS has external pull up resistor 
or not. And this is very much board specific. In order for driver to 
enable/disable internal pull up resistor in such cases we use two dapm 
paths to differentiate it.


--srini





This means that we can simplify the code by modelling MIC BIAS InternalX
as supply connected to MIC BIAS ExternalX. MIC BIAS InternalX is only
responsible for enabling the internal RBIAS resistor (2). The DAPM enable
sequence will automatically enable MIC BIAS ExternalX (1).

This makes it much easier to add support for MIC BIAS Internal3
as a next step.

Tested-by: Nikita Travkin <nikitos.tr@xxxxxxxxx> # longcheer-l8150
Cc: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
---
  sound/soc/codecs/msm8916-wcd-analog.c | 57 ++++++---------------------
  1 file changed, 13 insertions(+), 44 deletions(-)

diff --git a/sound/soc/codecs/msm8916-wcd-analog.c b/sound/soc/codecs/msm8916-wcd-analog.c
index 1f7964beb20c..930baae6eff5 100644
--- a/sound/soc/codecs/msm8916-wcd-analog.c
+++ b/sound/soc/codecs/msm8916-wcd-analog.c
@@ -389,23 +389,17 @@ static int pm8916_wcd_analog_enable_micbias_ext(struct snd_soc_component
  	return 0;
  }
  
-static int pm8916_wcd_analog_enable_micbias_int(struct snd_soc_component
-						 *component, int event,
-						 int reg, u32 cap_mode)
+static int pm8916_wcd_analog_enable_micbias_int(struct snd_soc_dapm_widget *w,
+						struct snd_kcontrol *kcontrol,
+						int event)
  {
+	struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
  
  	switch (event) {
  	case SND_SOC_DAPM_PRE_PMU:
-		snd_soc_component_update_bits(component, reg, MICB_1_EN_PULL_DOWN_EN_MASK, 0);
  		snd_soc_component_update_bits(component, CDC_A_MICB_1_EN,
  				    MICB_1_EN_OPA_STG2_TAIL_CURR_MASK,
  				    MICB_1_EN_OPA_STG2_TAIL_CURR_1_60UA);
-
-		break;
-	case SND_SOC_DAPM_POST_PMU:
-		pm8916_wcd_analog_micbias_enable(component);
-		snd_soc_component_update_bits(component, CDC_A_MICB_1_EN,
-				    MICB_1_EN_BYP_CAP_MASK, cap_mode);
  		break;
  	}
  
@@ -437,26 +431,6 @@ static int pm8916_wcd_analog_enable_micbias_ext2(struct
  
  }
  
-static int pm8916_wcd_analog_enable_micbias_int1(struct
-						  snd_soc_dapm_widget
-						  *w, struct snd_kcontrol
-						  *kcontrol, int event)
-{
-	struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
-	struct pm8916_wcd_analog_priv *wcd = snd_soc_component_get_drvdata(component);
-
-	switch (event) {
-	case SND_SOC_DAPM_PRE_PMU:
-		snd_soc_component_update_bits(component, CDC_A_MICB_1_INT_RBIAS,
-				    MICB_1_INT_TX1_INT_RBIAS_EN_MASK,
-				    MICB_1_INT_TX1_INT_RBIAS_EN_ENABLE);
-		break;
-	}
-
-	return pm8916_wcd_analog_enable_micbias_int(component, event, w->reg,
-						     wcd->micbias1_cap_mode);
-}
-
  static int pm8916_mbhc_configure_bias(struct pm8916_wcd_analog_priv *priv,
  				      bool micbias2_enabled)
  {
@@ -564,9 +538,8 @@ static int pm8916_wcd_analog_enable_micbias_int2(struct
  
  	switch (event) {
  	case SND_SOC_DAPM_PRE_PMU:
-		snd_soc_component_update_bits(component, CDC_A_MICB_1_INT_RBIAS,
-				    MICB_1_INT_TX2_INT_RBIAS_EN_MASK,
-				    MICB_1_INT_TX2_INT_RBIAS_EN_ENABLE);
+		snd_soc_component_update_bits(component, CDC_A_MICB_2_EN,
+					      CDC_A_MICB_2_PULL_DOWN_EN_MASK, 0);
  		break;
  	case SND_SOC_DAPM_POST_PMU:
  		pm8916_mbhc_configure_bias(wcd, true);
@@ -576,8 +549,7 @@ static int pm8916_wcd_analog_enable_micbias_int2(struct
  		break;
  	}
  
-	return pm8916_wcd_analog_enable_micbias_int(component, event, w->reg,
-						     wcd->micbias2_cap_mode);
+	return pm8916_wcd_analog_enable_micbias_int(w, kcontrol, event);
  }
  
  static int pm8916_wcd_analog_enable_adc(struct snd_soc_dapm_widget *w,
@@ -878,12 +850,10 @@ static const struct snd_soc_dapm_route pm8916_wcd_analog_audio_map[] = {
  	{"SPK PA", NULL, "SPK DAC"},
  	{"SPK DAC", "Switch", "PDM_RX3"},
  
-	{"MIC BIAS Internal1", NULL, "INT_LDO_H"},
-	{"MIC BIAS Internal2", NULL, "INT_LDO_H"},
+	{"MIC BIAS Internal1", NULL, "MIC BIAS External1"},
+	{"MIC BIAS Internal2", NULL, "MIC BIAS External2"},
  	{"MIC BIAS External1", NULL, "INT_LDO_H"},
  	{"MIC BIAS External2", NULL, "INT_LDO_H"},
-	{"MIC BIAS Internal1", NULL, "vdd-micbias"},
-	{"MIC BIAS Internal2", NULL, "vdd-micbias"},
  	{"MIC BIAS External1", NULL, "vdd-micbias"},
  	{"MIC BIAS External2", NULL, "vdd-micbias"},
  };
@@ -937,11 +907,10 @@ static const struct snd_soc_dapm_widget pm8916_wcd_analog_dapm_widgets[] = {
  	SND_SOC_DAPM_SUPPLY("RX_BIAS", CDC_A_RX_COM_BIAS_DAC, 7, 0, NULL, 0),
  
  	/* TX */
-	SND_SOC_DAPM_SUPPLY("MIC BIAS Internal1", CDC_A_MICB_1_EN, 7, 0,
-			    pm8916_wcd_analog_enable_micbias_int1,
-			    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
-			    SND_SOC_DAPM_POST_PMD),
-	SND_SOC_DAPM_SUPPLY("MIC BIAS Internal2", CDC_A_MICB_2_EN, 7, 0,
+	SND_SOC_DAPM_SUPPLY("MIC BIAS Internal1", CDC_A_MICB_1_INT_RBIAS, 7, 0,
+			    pm8916_wcd_analog_enable_micbias_int,
+			    SND_SOC_DAPM_PRE_PMU),
+	SND_SOC_DAPM_SUPPLY("MIC BIAS Internal2", CDC_A_MICB_1_INT_RBIAS, 4, 0,
  			    pm8916_wcd_analog_enable_micbias_int2,
  			    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
  			    SND_SOC_DAPM_POST_PMD),

_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel






