On Thu, 2007-10-25 at 15:44 +0800, zhejiang wrote:
> On Tue, 2007-10-23 at 11:11 +0200, Takashi Iwai wrote:
> > At Mon, 22 Oct 2007 14:08:19 +0800,
> > zhejiang wrote:
>
> > > > Ah, then it's basically similar like 3-stack model but with two
> > > > headphones instead of a pair of line-out and line-in.
> > > >
> > > > Without your modification of pin config, how the driver detects?
> > > > Do you have an output of kernel message with debug option about auto
> > > > pin configs?
> > > >
> > > I don't have the hardware.
> > > I have asked the bug reporter to do the experiment,
> > > I will post it here if i get any response.
> >
> > Thanks.
> >
>
> According to the response from the reporter,here is the pin config of
> the original driver.
>
> ALSA /tmp/alsa-driver-build/alsa-driver-1.0.15/pci/hda/hda_codec.c:2765:
> autoconfig: line_outs=3 (0xd/0xc/0xf/0x0/0x0)
> ALSA /tmp/alsa-driver-build/alsa-driver-1.0.15/pci/hda/hda_codec.c:2769:
> speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> ALSA /tmp/alsa-driver-build/alsa-driver-1.0.15/pci/hda/hda_codec.c:2773:
> hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
> ALSA /tmp/alsa-driver-build/alsa-driver-1.0.15/pci/hda/hda_codec.c:2781:
> inputs: mic=0x0, fmic=0x0, line=0x0, fline=0x0, cd=0x0, aux=0x0
> ALSA /tmp/alsa-driver-build/alsa-driver-1.0.15/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:1652: stac92xx_add_dyn_out_pins: total dac count=4
> ALSA /tmp/alsa-driver-build/alsa-driver-1.0.15/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:1775: dac_nids=3 (0x2/0x3/0x5/0x0/0x0)
>
>
> > > > Looking through the sigmatel code, we have several known use cases:
> > > >
> > > > 1. desktop
> > > > 1a. 3stack + front panel
> > > > front HP, front mic, rear line-out, rear line-in, rear mic
> > > >
> > > > 1b. 6stack + front panel
> > > > front HP, front mic, rear line-out, rear surr, rear CLFE
> > > > rear side, rear line-in, rear mic
> > > > and variants without front panel.
> > > >
> > > > In the case 1a, rear line-in and rear mic can be used as surround
> > > > outputs.
> > > >
> > > > 2. laptop
> > > > 2a. minimal
> > > > HP, speaker, mic, built-in mic
> > > > 2b. a la desktop
> > > > HP, speaker, line-in, mic, built-in mic
> > > > 2c. dell
> > > > HP x 2, speaker(s), mic, built-in mic
> > > >
> > > > Now, the case 2c requires a similar hack. But, before going more
> > > > deeply, it's better to recheck patch_sigmatel.c again. Basically, it
> > > > has already the code to add output sharing using line-in/mic-in. The
> > > > problem is that it checks only limited use-cases (1a) and it adds
> > > > cfg->line_outs and thus this influences on all other places.
> > > >
> > >
> > > The call graph of stac92xx_parse_auto_config() :
> > >
> > > 1.snd_hda_parse_pin_def_config()
> > >
> > > 2.stac92xx_add_dyn_out_pins()
> > > It check the cfg->line_outs and input_pins[] to add dynamic lineouts.
> > >
> > > 3.stac92xx_auto_fill_dac_nids()
> > > It only fills the dac_nids from the cfg->line_out_pins[],
> > >
> > > 4.stac92xx_auto_create_multi_out_ctls()
> > > It add controls according to the cfg->line_outs.
> > >
> > > we can see that they heavily depend on the line_outs[] info.
> > >
> > > How about this method?
> > >
> > > In stac92xx_add_dyn_out_pins(),we check the cfg->hp_outs,IF IT IS 2,then
> > > we switch the cfg->hp_pins[] with cfg->line_out_pins[].
> >
> > Maybe better to check cfg->line_out_type. I guess it's
> > AUTO_PIN_SPEAKER_OUT in the case of this Dell laptop. The driver
> > takes speaker in prior to headphone as the primary line-out.
> >
> > > The 2,3,4 may work without change.
> > > At the end of the stac92xx_parse_auto_config(),we restore the
> > > cfg->hp_pins[] and cfg->line_out_pins[].
> >
> > Alternatively, instead of saving/restoring informatoin, we can fix
> > snd_hda_parse_pin_def_config() itself to check cfg->hp_outs and
> > cfg->speaker_outs to determine the primary output. If one of them is
> > greater, take it as the primary output.
> > It's less hackish but *might* cause some regression in rare cases.
> >
>
>
> I think that we need to restore the cfg->hp_pins and cfg->line_out_pins
> for the rest code,because:
>
> 1. stac92xx_auto_init_hp_out() need to use the hp_pins to enable the
> AC_PINCTL_HP_EN
> 2. stac92xx_hp_detect() need to use the hp_outs to detect jack presense
> and will disable line_out_pins and speaker_pins.
> 3. stac92xx_init() use the hp_pins to enable unsolicited response.
>
> If we copy cfg->hp_outs to the line_out_pins, all these codes won't
> work. ^-^
>
>
> > > Another things to change :
> > > 1.snd_hda_parse_pin_def_config()
> > > Should sort the hp_pins[] by sequence.
> >
> > Yeah, just missing right now.
> >
> > > 2.stac92xx_auto_fill_dac_nids()
> > > Support the "Front Mic" switch as well.
> > > 3.stac92xx_io_switch_put()
> > > If Mic work as output for laptop,enable pin detect too.
> >
> > Well, I think the better fix is to fix the "Front Mic". If there is
> > only a front mic, it should be basically labelled as "Mic" because
> > it's the only one. So, again, snd_hda_parse_pin_def_config(), we can
> > reassign input_pins[AUTO_PIN_FRONT_MIC] to input_pins[AUTO_PIN_MIC] if
> > there is only one mic. Then the rest wouldn't need changes.
> >
>
> Great.
>
> > Of course, another question is what to do when we have both rear and
> > front mic and if we still want to handle them as outputs. Well, we
> > have no such hardware yet, though.
> >
> >
> > thanks,
> >
> > Takashi
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@xxxxxxxxxxxxxxxx
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Could you try this patch? I found an updated pin config on Dell'sweb
site. If this works, go ahead and check it in.
Summary: Update Dell XPS 1210 Pin Config.
Signed off by Tobin Davis <tdavis@xxxxxxxxxxxx>
diff -r 60b9916a18b8 pci/hda/patch_sigmatel.c
--- a/pci/hda/patch_sigmatel.c Tue Oct 30 15:28:14 2007 +0100
+++ b/pci/hda/patch_sigmatel.c Tue Oct 30 08:43:39 2007 -0700
@@ -884,9 +884,9 @@ static unsigned int dell_922x_m81_pin_co
102801D7 (Dell XPS M1210)
*/
static unsigned int dell_922x_m82_pin_configs[10] = {
- 0x0221121f, 0x408103ff, 0x02111212, 0x90100310,
- 0x408003f1, 0x02111211, 0x03451340, 0x40c003f2,
- 0x508003f3, 0x405003f4,
+ 0x0221121e, 0x408103ff, 0x0281123e, 0x90100310,
+ 0x408003f1, 0x0221122f, 0x03451340, 0x40c003f2,
+ 0x50a003f3, 0x405003f4,
};
static unsigned int d945gtp3_pin_configs[10] = {
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
