Re: [PATCH v5 2/7] ASoC: tegra: Allow 24bit and 32bit samples

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 20/12/2019 16:40, Dmitry Osipenko wrote:
20.12.2019 18:25, Ben Dooks пишет:
On 20/12/2019 15:02, Dmitry Osipenko wrote:
20.12.2019 17:56, Ben Dooks пишет:
On 20/12/2019 14:43, Dmitry Osipenko wrote:
20.12.2019 16:57, Jon Hunter пишет:

On 20/12/2019 11:38, Ben Dooks wrote:
On 20/12/2019 11:30, Jon Hunter wrote:

On 25/11/2019 17:28, Dmitry Osipenko wrote:
25.11.2019 20:22, Dmitry Osipenko пишет:
25.11.2019 13:37, Ben Dooks пишет:
On 23/11/2019 21:09, Dmitry Osipenko wrote:
18.10.2019 18:48, Ben Dooks пишет:
From: Edward Cragg <edward.cragg@xxxxxxxxxxxxxxx>

The tegra3 audio can support 24 and 32 bit sample sizes so add
the
option to the tegra30_i2s_hw_params to configure the S24_LE or
S32_LE
formats when requested.

Signed-off-by: Edward Cragg <edward.cragg@xxxxxxxxxxxxxxx>
[ben.dooks@xxxxxxxxxxxxxxx: fixup merge of 24 and 32bit]
[ben.dooks@xxxxxxxxxxxxxxx: add pm calls around ytdm config]
[ben.dooks@xxxxxxxxxxxxxxx: drop debug printing to dev_dbg]
Signed-off-by: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
---
squash 5aeca5a055fd ASoC: tegra: i2s: pm_runtime_get_sync() is
needed
in tdm code

ASoC: tegra: i2s: pm_runtime_get_sync() is needed in tdm code
---
      sound/soc/tegra/tegra30_i2s.c | 25
++++++++++++++++++++-----
      1 file changed, 20 insertions(+), 5 deletions(-)

diff --git a/sound/soc/tegra/tegra30_i2s.c
b/sound/soc/tegra/tegra30_i2s.c
index 73f0dddeaef3..063f34c882af 100644
--- a/sound/soc/tegra/tegra30_i2s.c
+++ b/sound/soc/tegra/tegra30_i2s.c
@@ -127,7 +127,7 @@ static int tegra30_i2s_hw_params(struct
snd_pcm_substream *substream,
          struct device *dev = dai->dev;
          struct tegra30_i2s *i2s =
snd_soc_dai_get_drvdata(dai);
          unsigned int mask, val, reg;
-    int ret, sample_size, srate, i2sclock, bitcnt;
+    int ret, sample_size, srate, i2sclock, bitcnt, audio_bits;
          struct tegra30_ahub_cif_conf cif_conf;
            if (params_channels(params) != 2)
@@ -137,8 +137,19 @@ static int tegra30_i2s_hw_params(struct
snd_pcm_substream *substream,
          switch (params_format(params)) {
          case SNDRV_PCM_FORMAT_S16_LE:
              val = TEGRA30_I2S_CTRL_BIT_SIZE_16;
+        audio_bits = TEGRA30_AUDIOCIF_BITS_16;
              sample_size = 16;
              break;
+    case SNDRV_PCM_FORMAT_S24_LE:
+        val = TEGRA30_I2S_CTRL_BIT_SIZE_24;
+        audio_bits = TEGRA30_AUDIOCIF_BITS_24;
+        sample_size = 24;
+        break;
+    case SNDRV_PCM_FORMAT_S32_LE:
+        val = TEGRA30_I2S_CTRL_BIT_SIZE_32;
+        audio_bits = TEGRA30_AUDIOCIF_BITS_32;
+        sample_size = 32;
+        break;
          default:
              return -EINVAL;
          }
@@ -170,8 +181,8 @@ static int tegra30_i2s_hw_params(struct
snd_pcm_substream *substream,
          cif_conf.threshold = 0;
          cif_conf.audio_channels = 2;
          cif_conf.client_channels = 2;
-    cif_conf.audio_bits = TEGRA30_AUDIOCIF_BITS_16;
-    cif_conf.client_bits = TEGRA30_AUDIOCIF_BITS_16;
+    cif_conf.audio_bits = audio_bits;
+    cif_conf.client_bits = audio_bits;
          cif_conf.expand = 0;
          cif_conf.stereo_conv = 0;
          cif_conf.replicate = 0;
@@ -306,14 +317,18 @@ static const struct snd_soc_dai_driver
tegra30_i2s_dai_template = {
              .channels_min = 2,
              .channels_max = 2,
              .rates = SNDRV_PCM_RATE_8000_96000,
-        .formats = SNDRV_PCM_FMTBIT_S16_LE,
+        .formats = SNDRV_PCM_FMTBIT_S32_LE |
+               SNDRV_PCM_FMTBIT_S24_LE |
+               SNDRV_PCM_FMTBIT_S16_LE,
          },
          .capture = {
              .stream_name = "Capture",
              .channels_min = 2,
              .channels_max = 2,
              .rates = SNDRV_PCM_RATE_8000_96000,
-        .formats = SNDRV_PCM_FMTBIT_S16_LE,
+        .formats = SNDRV_PCM_FMTBIT_S32_LE |
+               SNDRV_PCM_FMTBIT_S24_LE |
+               SNDRV_PCM_FMTBIT_S16_LE,
          },
          .ops = &tegra30_i2s_dai_ops,
          .symmetric_rates = 1,


Hello,

This patch breaks audio on Tegra30. I don't see errors
anywhere, but
there is no audio and reverting this patch helps. Please fix it.

What is the failure mode? I can try and take a look at this some
time
this week, but I am not sure if I have any boards with an actual
useful
audio output?

The failure mode is that there no sound. I also noticed that video
playback stutters a lot if movie file has audio track, seems
something
times out during of the audio playback. For now I don't have any
more info.


Oh, I didn't say how to reproduce it.. for example simply playing
big_buck_bunny_720p_h264.mov in MPV has the audio problem.

https://download.blender.org/peach/bigbuckbunny_movies/big_buck_bunny_720p_h264.mov




Given that the audio drivers uses regmap, it could be good to
dump the
I2S/AHUB registers while the clip if playing with and without this
patch
to see the differences. I am curious if the audio is now being
played as
24 or 32-bit instead of 16-bit now these are available.

You could also dump the hw_params to see the format while playing as
well ...

$ /proc/asound/<scard-name>/pcm0p/sub0/hw_params

I suppose it is also possible that the codec isn't properly doing >16
bits and the fact we now offer 24 and 32 could be an issue. I've not
got anything with an audio output on it that would be easy to test.

I thought I had tested on a Jetson TK1 (Tegra124) but it was sometime
back. However, admittedly I may have only done simple 16-bit testing
with speaker-test.

We do verify that all soundcards are detected and registered as
expected
during daily testing, but at the moment we don't have anything that
verifies actual playback.

Please take a look at the attached logs.

I wonder if we are falling into FIFO configuration issues with the
non-16 bit case.

Can you try adding the following two patches?

It is much better now! There is no horrible noise and no stuttering, but
audio still has a "robotic" effect, like freq isn't correct.

I wonder if there's an issue with FIFO stoking? I should also possibly
add the correctly stop FIFOs patch as well.

I'll be happy to try more patches.

Meanwhile sound on v5.5+ is broken and thus the incomplete patches
should be reverted.

Have you checked if just removing the 24/32 bits from .formats in
the dai template and see if the problem continues? I will try and
see if I can find the code that does the fifo level checking and
see if the problem is in the FIFO fill or something else in the
audio hub setup.


--
Ben Dooks				http://www.codethink.co.uk/
Senior Engineer				Codethink - Providing Genius

https://www.codethink.co.uk/privacy.html
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel




[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux