Comparing the voltage of VDDA and VDDIO to determine whether or not to enable VDDC manual override is insufficient. This is a problem in case the VDDA is supplied from different regulator than VDDIO, while both report the same voltage to the regulator framework. In that case where VDDA and VDDIO is supplied by different regulators, the VDDC manual override must not be applied. Fixes: b6319b061ba2 ("ASoC: sgtl5000: Fix charge pump source assignment") Signed-off-by: Marek Vasut <marex@xxxxxxx> Cc: Fabio Estevam <festevam@xxxxxxxxx> Cc: Igor Opaniuk <igor.opaniuk@xxxxxxxxxxx> Cc: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx> Cc: Mark Brown <broonie@xxxxxxxxxx> Cc: Oleksandr Suvorov <oleksandr.suvorov@xxxxxxxxxxx> --- V2: Switch to regulator_is_equal() helper --- sound/soc/codecs/sgtl5000.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 93da6b58c97df..d5130193b4a2f 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -1344,7 +1344,8 @@ static int sgtl5000_set_power_regs(struct snd_soc_component *component) * if vddio == vdda the source of charge pump should be * assigned manually to VDDIO */ - if (vddio == vdda) { + if (regulator_is_equal(sgtl5000->supplies[VDDA].consumer, + sgtl5000->supplies[VDDIO].consumer)) { lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD; lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO << SGTL5000_VDDC_MAN_ASSN_SHIFT; -- 2.24.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel