I guess the change in ifdef for cml_desc definition is still missing.
Not sure what change you are referring to?
Take a look at the definition of cml_desc. It's wrapped with
#if IS_ENABLED(CONFIG_SND_SOC_SOF_COMETLAKE_LP) || \
IS_ENABLED(CONFIG_SND_SOC_SOF_COMETLAKE_H)
but this wasn't updated for the new COMETLAKE_S.
Ah yes, that's a problem. will fix.
Also, can we reduce even the ifdef around sof_dev_desc definitions by
__maybe_unused atttribute?
Sorry, I am not following your suggestion. I would really like to keep
the ifdefs for now, and while it can be seen as overkill to have
descriptors that are identical in some cases the past experience shows
it's useful when we have to add quirks for specific 'hardware
recommended programming sequences'.
What I suggested was simple, just dropping ifdef by something like
diff --git a/sound/soc/sof/sof-pci-dev.c b/sound/soc/sof/sof-pci-dev.c
index bbeffd932de7..297632a54f1b 100644
--- a/sound/soc/sof/sof-pci-dev.c
+++ b/sound/soc/sof/sof-pci-dev.c
@@ -36,8 +36,7 @@ MODULE_PARM_DESC(sof_pci_debug, "SOF PCI debug options (0x0 all off)");
#define SOF_PCI_DISABLE_PM_RUNTIME BIT(0)
-#if IS_ENABLED(CONFIG_SND_SOC_SOF_APOLLOLAKE)
-static const struct sof_dev_desc bxt_desc = {
+static const struct sof_dev_desc __maybe_unused bxt_desc = {
.machines = snd_soc_acpi_intel_bxt_machines,
.resindex_lpe_base = 0,
.resindex_pcicfg_base = -1,
@@ -52,10 +51,8 @@ static const struct sof_dev_desc bxt_desc = {
.ops = &sof_apl_ops,
.arch_ops = &sof_xtensa_arch_ops
};
-#endif
-#if IS_ENABLED(CONFIG_SND_SOC_SOF_GEMINILAKE)
-static const struct sof_dev_desc glk_desc = {
+static const struct sof_dev_desc __maybe_unused glk_desc = {
.machines = snd_soc_acpi_intel_glk_machines,
.resindex_lpe_base = 0,
.resindex_pcicfg_base = -1,
@@ -70,10 +67,8 @@ static const struct sof_dev_desc glk_desc = {
.ops = &sof_apl_ops,
.arch_ops = &sof_xtensa_arch_ops
};
-#endif
.....
Then the issue I pointed above can be solved as well.
The ifdefs are still needed in the PCI IDs tables
static const struct pci_device_id sof_pci_ids[] = {
#if IS_ENABLED(CONFIG_SND_SOC_SOF_MERRIFIELD)
{ PCI_DEVICE(0x8086, 0x119a),
.driver_data = (unsigned long)&tng_desc},
#endif
#if IS_ENABLED(CONFIG_SND_SOC_SOF_APOLLOLAKE)
/* BXT-P & Apollolake */
{ PCI_DEVICE(0x8086, 0x5a98),
.driver_data = (unsigned long)&bxt_desc},
{ PCI_DEVICE(0x8086, 0x1a98),
.driver_data = (unsigned long)&bxt_desc},
#endif
#if IS_ENABLED(CONFIG_SND_SOC_SOF_GEMINILAKE)
{ PCI_DEVICE(0x8086, 0x3198),
.driver_data = (unsigned long)&glk_desc},
#endif
so for consistency I personally prefer the matching ifdef for the
descriptors.
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
