HP output driver has two parameters that can be configured to reduce
pop noise: power-on delay and ramp-up step time. Two new kcontrols
have been added to set these parameters.
Also have to alter timeout in aic31xx_dapm_power_event() because default
timeout does fire when higher supported power-on delay are configured.
Signed-off-by: Nikita Yushchenko <nikita.yoush@xxxxxxxxxxxxxxxxxx>
---
sound/soc/codecs/tlv320aic31xx.c | 32 ++++++++++++++++++++++++++++++--
1 file changed, 30 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/tlv320aic31xx.c b/sound/soc/codecs/tlv320aic31xx.c
index f6f19fdc72f5..d6c462f21370 100644
--- a/sound/soc/codecs/tlv320aic31xx.c
+++ b/sound/soc/codecs/tlv320aic31xx.c
@@ -262,6 +262,19 @@ static SOC_ENUM_SINGLE_DECL(mic1lm_p_enum, AIC31XX_MICPGAPI, 2,
static SOC_ENUM_SINGLE_DECL(mic1lm_m_enum, AIC31XX_MICPGAMI, 4,
mic_select_text);
+static const char * const hp_poweron_time_text[] = {
+ "0us", "15.3us", "153us", "1.53ms", "15.3ms", "76.2ms",
+ "153ms", "304ms", "610ms", "1.22s", "3.04s", "6.1s" };
+
+static SOC_ENUM_SINGLE_DECL(hp_poweron_time_enum, AIC31XX_HPPOP, 3,
+ hp_poweron_time_text);
+
+static const char * const hp_rampup_step_text[] = {
+ "0ms", "0.98ms", "1.95ms", "3.9ms" };
+
+static SOC_ENUM_SINGLE_DECL(hp_rampup_step_enum, AIC31XX_HPPOP, 1,
+ hp_rampup_step_text);
+
static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -6350, 50, 0);
static const DECLARE_TLV_DB_SCALE(adc_fgain_tlv, 0, 10, 0);
static const DECLARE_TLV_DB_SCALE(adc_cgain_tlv, -2000, 50, 0);
@@ -285,6 +298,14 @@ static const struct snd_kcontrol_new common31xx_snd_controls[] = {
SOC_DOUBLE_R_TLV("HP Analog Playback Volume", AIC31XX_LANALOGHPL,
AIC31XX_RANALOGHPR, 0, 0x7F, 1, hp_vol_tlv),
+
+ /* HP de-pop control: apply power not immediately but via ramp
+ * function with these psarameters. Note that power up sequence
+ * has to wait for this to complete; this is implemented by
+ * polling HP driver status in aic31xx_dapm_power_event()
+ */
+ SOC_ENUM("HP Output Driver Power-On time", hp_poweron_time_enum),
+ SOC_ENUM("HP Output Driver Ramp-up step", hp_rampup_step_enum),
};
static const struct snd_kcontrol_new aic31xx_snd_controls[] = {
@@ -357,6 +378,7 @@ static int aic31xx_dapm_power_event(struct snd_soc_dapm_widget *w,
struct aic31xx_priv *aic31xx = snd_soc_component_get_drvdata(component);
unsigned int reg = AIC31XX_DACFLAG1;
unsigned int mask;
+ unsigned int timeout = 500 * USEC_PER_MSEC;
switch (WIDGET_BIT(w->reg, w->shift)) {
case WIDGET_BIT(AIC31XX_DACSETUP, 7):
@@ -367,9 +389,13 @@ static int aic31xx_dapm_power_event(struct snd_soc_dapm_widget *w,
break;
case WIDGET_BIT(AIC31XX_HPDRIVER, 7):
mask = AIC31XX_HPLDRVPWRSTATUS_MASK;
+ if (event == SND_SOC_DAPM_POST_PMU)
+ timeout = 7 * USEC_PER_SEC;
break;
case WIDGET_BIT(AIC31XX_HPDRIVER, 6):
mask = AIC31XX_HPRDRVPWRSTATUS_MASK;
+ if (event == SND_SOC_DAPM_POST_PMU)
+ timeout = 7 * USEC_PER_SEC;
break;
case WIDGET_BIT(AIC31XX_SPKAMP, 7):
mask = AIC31XX_SPLDRVPWRSTATUS_MASK;
@@ -389,9 +415,11 @@ static int aic31xx_dapm_power_event(struct snd_soc_dapm_widget *w,
switch (event) {
case SND_SOC_DAPM_POST_PMU:
- return aic31xx_wait_bits(aic31xx, reg, mask, mask, 5000, 100);
+ return aic31xx_wait_bits(aic31xx, reg, mask, mask,
+ 5000, timeout / 5000);
case SND_SOC_DAPM_POST_PMD:
- return aic31xx_wait_bits(aic31xx, reg, mask, 0, 5000, 100);
+ return aic31xx_wait_bits(aic31xx, reg, mask, 0,
+ 5000, timeout / 5000);
default:
dev_dbg(component->dev,
"Unhandled dapm widget event %d from %s\n",
--
2.20.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
