On 19/11/19 7:23 PM, Pierre-Louis Bossart wrote:
+static int acp3x_dai_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct i2s_dev_data *adata;
+ int status;
+
+ adata = devm_kzalloc(&pdev->dev, sizeof(struct i2s_dev_data),
+ GFP_KERNEL);
+ if (!adata)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "IORESOURCE_MEM FAILED\n");
+ return -ENOMEM;
+ }
+
+ adata->acp3x_base = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
+ if (IS_ERR(adata->acp3x_base))
+ return PTR_ERR(adata->acp3x_base);
+
+ adata->i2s_irq = res->start;
+ dev_set_drvdata(&pdev->dev, adata);
+ status = devm_snd_soc_register_component(&pdev->dev,
+ &acp3x_dai_component, &acp3x_i2s_dai, 1);
+ if (status) {
+ dev_err(&pdev->dev, "Fail to register acp i2s dai\n");
+ return -ENODEV;
+ }
+ pm_runtime_set_autosuspend_delay(&pdev->dev, 5000);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
question: here you want to use pm_runtime for this platform device...
+ return 0;
+}
+
+static int acp3x_dai_remove(struct platform_device *pdev)
+{
+ pm_runtime_disable(&pdev->dev);
+ return 0;
+}
+static struct platform_driver acp3x_dai_driver = {
+ .probe = acp3x_dai_probe,
+ .remove = acp3x_dai_remove,
+ .driver = {
+ .name = "acp3x_i2s_playcap",
... but here there is no .pm structure and I don't see any
suspend/resume routines for this driver...
+ },
+};
@@ -774,13 +586,14 @@ static struct platform_driver acp3x_dma_driver = {
.probe = acp3x_audio_probe,
.remove = acp3x_audio_remove,
.driver = {
- .name = "acp3x_rv_i2s",
+ .name = "acp3x_rv_i2s_dma",
.pm = &acp3x_pm_ops,
},
... but for this other platform_driver you do have a .pm structure and
suspend-resume implementations.
Wondering if this is a miss or a feature?
As per our design, ACP IP specific changes like ACP power on/off will be
handled in ACP pci driver(parent device for DMA device and I2S
controller(nothing but CPU DAI))
Where as In DMA driver during runtime suspend/resume interrupts will be
disabled and enabled.
But in DAI driver there is nothing to be done in suspend and resume just
returning zero so we have not added PM suspend/resume here in DAI.
So is it expected to add the suspend resumes with returning zero.Or if
pm runtime is not needed in CPU DAI shall we remove the existing PM
related calls in DAI.
Please suggest us.
Thanks,
Vishnu
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
