On Mon, Nov 11, 2019 at 05:18:22PM +0800, Shengjiu Wang wrote: > Add compatible string "fsl,imx8qm-asrc" for imx8qm platform. > > There are two asrc modules in imx8qm, the clock mapping is > different for each other, so add new property "fsl,asrc-clk-map" > to distinguish them. What's the clock mapping? > Signed-off-by: Shengjiu Wang <shengjiu.wang@xxxxxxx> > --- > changes in v2 > -none > > changes in v3 > -use only one compatible string "fsl,imx8qm-asrc", > -add new property "fsl,asrc-clk-map". > > Documentation/devicetree/bindings/sound/fsl,asrc.txt | 10 +++++++++- > 1 file changed, 9 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/sound/fsl,asrc.txt b/Documentation/devicetree/bindings/sound/fsl,asrc.txt > index 1d4d9f938689..02edab7cf3e0 100644 > --- a/Documentation/devicetree/bindings/sound/fsl,asrc.txt > +++ b/Documentation/devicetree/bindings/sound/fsl,asrc.txt > @@ -8,7 +8,8 @@ three substreams within totally 10 channels. > > Required properties: > > - - compatible : Contains "fsl,imx35-asrc" or "fsl,imx53-asrc". > + - compatible : Contains "fsl,imx35-asrc", "fsl,imx53-asrc", > + "fsl,imx8qm-asrc". > > - reg : Offset and length of the register set for the device. > > @@ -35,6 +36,13 @@ Required properties: > > - fsl,asrc-width : Defines a mutual sample width used by DPCM Back Ends. > > + - fsl,asrc-clk-map : Defines clock map used in driver. which is required > + by imx8qm/imx8qxp platform > + <0> - select the map for asrc0 in imx8qm > + <1> - select the map for asrc1 in imx8qm > + <2> - select the map for asrc0 in imx8qxp > + <3> - select the map for asrc1 in imx8qxp Is this 4 modes of the h/w or just selecting 1 of 4 settings defined in the driver? How does one decide? This seems strange. imx8qxp should perhaps be a separate compatible. Then you only need 1 of 2 modes... Rob _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
