At Sun, 7 Oct 2007 22:32:17 +0200 (CEST), linuxcbon wrote: > > hi, > > I have no idea if this is a bug : tv card is hauppauge wintv model 44346, > tuner model is Philips FI1216MF MK2 > > I found in /tmp/217usbkeyboardbug.log > > Last 20 lines of dmesg: > tveeprom 2-0050: has radio > bttv0: Hauppauge eeprom indicates model#44346 > bttv0: using tuner=3 > bttv0: i2c: checking for MSP34xx @ 0x80... found > msp3400 2-0040: MSP3415G-B8 found @ 0x80 (bt878 #0 [sw]) > msp3400 2-0040: MSP3415G-B8 supports nicam and radio, mode is autodetect > and autoselect > bttv0: i2c: checking for TDA9875 @ 0xb0... not found > bttv0: i2c: checking for TDA7432 @ 0x8a... not found > bttv0: i2c: checking for TDA9887 @ 0x86... not found > tuner 2-0061: chip found @ 0xc2 (bt878 #0 [sw]) > tuner 2-0061: type set to 3 (Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, > FR1216MF)) > tuner 2-0061: type set to 3 (Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, > FR1216MF)) > bttv0: registered device video0 > bttv0: registered device vbi0 > bttv0: registered device radio0 > bttv0: PLL: 28636363 => 35468950 .. ok > ALSA /mnt/hda3/sources/sources116/alsa-driver-1.0.15rc2/pci/bt87x.c:872: > unknown card 0x878-0x70:0x13eb > ALSA /mnt/hda3/sources/sources116/alsa-driver-1.0.15rc2/pci/bt87x.c:875: > please mail id, board name, and, if it works, the correct digital_rate > option to <alsa-devel@xxxxxxxxxxxxxxxx> > ACPI: PCI Interrupt 0000:01:04.1[A] -> Link [LNK1] -> GSI 5 (level, low) > -> IRQ 5 > ALSA /mnt/hda3/sources/sources116/alsa-driver-1.0.15rc2/pci/bt87x.c:943: > bt87x0: Using board 0, analog, digital (rate 32000 Hz) This should have been fixed in the recent version. Please check 1.0.15-rc3. Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
