At Wed, 19 Sep 2007 20:26:27 +0200,
Bernhard Rosenkraenzer wrote:
>
> On Thursday 13 September 2007, Takashi Iwai wrote:
> > > The patch below fixes it, but unfortunately, Medion MD2 uses the same PCI
> > > (and subvendor/subdevice) ID -- so the patch quite likely breaks Medion
> > > MD2 support.
> >
> > In that case, try to reset board_config after
> > snd_hda_check_board_config() but before setup_preset(). See
> > patch_alc885() for example (appeariny in the latest ALSA tree, also in
> > mm tree).
>
> Will do...
>
> > Otherwise it looks OK to me. But, what is the primary difference in
> > the setup between MD2 and WIM2160?
>
> I don't know -- I made it work by trial and error (I don't have access to any
> hardware specs or the likes). By some more trial and error, I could minimize
> the patch some more - it's down to editing the init_verbs and mixers.
> In the mixers, this one seems to be the key:
> HDA_BIND_MUTE("Master Playback Switch", 0x0c, 2, HDA_INPUT)
Hmm, these should be constantly unmuted at initialization via
alc883_medion_md2_verbs[] in MD2 model, too.
Could you double-check whether MD2 model doesn't work? If really not
works, check codec#* output whether the inputs of NID 0x0c get unmuted
or not.
Takashi
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
