Hello everyone, I am using ALSA to capture sound from a micrphone. I need to know when the capture device starts. In Paul Davis' Tutorial, he mentioned two approaches. But, I have questions on each of them. When to start the device When you open the audio interface, ALSA ensures that it is not active - no data is being moved to or from its external connectors. Presumably, at some point you want this data transfer to begin. There are several options for how to make this happen. 1. The control point here the start threshold, which defines the number of frames of space/data necessary to start the device automatically. If set to some value other than zero for playback, it is necessary to prefill the playback buffer before the device will start. If set to zero, the first data written to the device (or first attempt to read from a capture stream) will start the device. My question: what does he means on " If set to zero"? Does anyone know which parameter of which API should be set to zero? 2. You can also start the device explicitly using snd_pcm_start, but this requires buffer prefilling in the case of the playback stream. If you attempt to start the stream without doing this, you will get -EPIPE as a return code, indicating that there is no data waiting to deliver to the playback hardware buffer. My question: Is there anything to be done before calling snd_pcm_start in the case of capturing stream? If there is, what are they? Thanks in advance, Sheng _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
