At Tue, 18 Sep 2007 12:56:49 -0400, Peter Skensved wrote: > > On Wed, Aug 22, 2007 at 11:52:34AM +0200, Takashi Iwai wrote: > > At Wed, 22 Aug 2007 11:20:50 +0200, > > I wrote: > > > > > > > > > 4) When recording from the internal microphone the level is very, very low and almost > > > > > > drowns in static noise. > > > > > > > > > > There are "Mic Boost" and "Front Mic Boost" mixer volumes. > > > > > > > > > > > > > Not with model=laptop-eapd - my alas mixer only shows Master, PCM, Mic, Capture, Mix, > > > > External Amp and Internal Amp > > > > > > The Mic Boost control was added _after_ 1.0.14 release. > > > (Correction in the above text: Front Mic Boost doesn't exist for > > > AD1986A but for other codec.) > > > > > > So, please try HG version first. Then let's debug further. > > > > Note that the auto-mute feature isn't implemented yet in HG version, > > too. But the mic boost should work at least. > > > > I downloaded the HG version, compiled against my kernel and re-loaded just > the modules ( so as not to break too much else ). I get the two microphone boost > controls ( one for playback and another for capture ) and they work. I can > record from both internal and external microphone. > > The `Internal Mic.' bar/switch appears to do nothing > > The `Microphone" bar/switch is active and behaves as expected > > I see a couple of extra modem related controls ( Caller ID and Off-hook ) - > does that mean I can make the soft modem ( Si3054 ) work with slmodemd --alsa ??? Possibly. There are some devices that don't work well, and some older slmodem doesn't work, too. > Still no PC speaker .... I don't care :) > > The below is the untested patch for adding the auto-mute feature. > > A new model laptop-automute is implemented. Of course, it's against > > the latest HG version. Give it a try. > > > > I tried applying the automute patch but I must have picked the wrong > version of pci/hda/patch_analog.c because most of the patch failed. At > what stage was the patch supposed to be applied ? I did it after having > done all the steps on the devel page. Then the patch was likely already merged... Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
