On Sat, 08 Sep 2007 01:22:43 +0200 Rene Herman <rene.herman@xxxxxxxxx> wrote: > 5. I38-MMSN852 = AZT2316R + CS4231A-KL, with EEPROM > I got this one. It has also AZT3320 chip. > All cards with a settings EEPROM have been tested with their JMPCFG jumper > set to both EEPROM and SOFTWARE, and work correctly in both situations. > The JMPCFG was set to software. I run into these problems: 1. There is a problem with freeing resources in the probe function. If the probe ends with error, removal of the driver does not release requested regions, so the driver cannot be reloaded again (and cat /proc/iports crashes). It is easy to reproduce: give irq number which is already acquired by another driver then unload driver. 2. After a while I found the free irq (it took quite long with this manual settings). The driver loaded, the /proc/asound/* files showed GALAXY something but the alsamixer ended with message that there was no mixer device. I look forward to next version of your driver to test, Krzysztof _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
