Romain Bossart wrote: > Romain Bossart wrote: >> Selon Clemens Ladisch <cladisch@xxxxxxxxxxxx>: >> >>> Romain Bossart wrote: >>>> My audiophile 24/96 Midi Out sends zeroes continuously, >>>> so I can't use any instrument. I checked that with amidi >>>> by looking at the stream output of a connected instrument >>>> (midi out -> instrument -> midi in -> amidi). Zeroes are >>>> sent whether or not I try to send (normal) midi messages. >>> Would it be possible to connect the midi out directly to the >>> midi in? >> I also tried it, same results. >> >>> Is the number of transmitted bytes in /proc/asound/cardX/midi0 >>> about correct? > > Yes, the number is correct. After a reboot, I prepared amidi > to output the incoming midi stream and switched on my instrument > for 2 seconds approx : around 10kB of zeroes were counted by > amidi and /proc/asound/card0/midi0. > > >> Thank you ! >> >> Romain >> >> >>> Regards, >>> Clemens >>> Actually, the same exact number of zeroes were sent. I must acknowledge I used jack for connecting amidi... I looks like jack sends the zeroes as soon as it is started. Would someone have a clue ? Thanks Romain _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
