Programming alsa is confusing at the point that there is basicly no documentation. So since I get more and more confused I hope someone can help me out here. First - I didn't find any complete description about interleaved and non-interleaved transport. What is actually (in a nutshell) the difference and what the consequences of either approach? Second - when capturing I do the following: snd_pcm_hw_params_set_format: So this is setting some kind of format!? I mean first off - which format should one set? There are a few dozens to choose from and the hardware will most likely not support all of them. So how does one retrieve a list of the hardware supported formats? And which one should be considered superior? I assume it does affect the buffer size eventually needed!? snd_pcm_hw_params_get_channels_max: This one should IMO output the channels - but for a capture device (where often there is just a single stereo input) this would normally just return 2, right? snd_pcm_hw_params_set_channels: This is pretty self explanatory - aside from the effect this one has. Eventually there will be gotten some data via a buffer. Would there be 6 channels (dolby stuff) does a filled buffer look like the following? Channel1 Channel2 Channel3 Channel4 Channel5 Channel6 Channel1 Channel2 . . . snd_pcm_hw_params_set_rate: This one is also pretty self explanatory - aside from pure digital devices - which I'm lucky not to have. snd_pcm_hw_params_set_periods: And we are at the REAL confusing stuff. Here one can set "periods". But what is meant by a period? Is it a frame or how would sane people call this? And there's a count of periods set - what is this count used for? snd_pcm_hw_params_get_period_size: Ok from the previous periods I can get the size. I assume this is somewhat usefull to estimate the buffer size but since I don't know exactly what periods are or do - I dunno. snd_pcm_hw_params_set_buffer_size: This one sets the buffer size. I'm kind of confused here because you have to set the periods AND the buffer size. So are the periods just the slices for the buffer? So I think the buffer can be calculated as following!?: <periods> * <periodSize> * <formatTypeWTF> * <channels> So is the buffer size the actual byte size, a frame size the period size or whatever? snd_pcm_readi: Since the buffer is a void* I assume that the format does affect the data needed for the buffer. But having a buffer in userspace and a buffer set in alsa means it does copy at least twice. I fear for direct copying one has to get in touch with this mmap method nobody wants to talk about :( If you read to this point thank you ;) _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
