Hi, File /home/devel/linux-rdc/sound/arm/sa11xx-uda1341.c line 82 Unknown CONFIG option! CONFIG_H3600_HAL File /home/devel/linux-rdc/sound/arm/sa11xx-uda1341.c line 103 Unknown CONFIG option! CONFIG_H3600_HAL File /home/devel/linux-rdc/sound/arm/sa11xx-uda1341.c line 241 Unknown CONFIG option! CONFIG_H3600_HAL File /home/devel/linux-rdc/sound/arm/sa11xx-uda1341.c line 310 Unknown CONFIG option! CONFIG_H3600_HAL File /home/devel/linux-rdc/sound/arm/sa11xx-uda1341.c line 334 Unknown CONFIG option! CONFIG_H3600_HAL File /home/devel/linux-rdc/sound/arm/sa11xx-uda1341.c line 344 Unknown CONFIG option! CONFIG_H3600_HAL File /home/devel/linux-rdc/sound/arm/sa11xx-uda1341.c line 357 Unknown CONFIG option! CONFIG_H3600_HAL Regards, Michal -- LOG http://www.stardust.webpages.pl/log/ Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@xxxxxxxxx> --- linux-rdc-clean/sound/arm/sa11xx-uda1341.c 2007-07-09 01:32:17.000000000 +0200 +++ linux-rdc/sound/arm/sa11xx-uda1341.c 2007-07-31 17:43:12.000000000 +0200 @@ -79,12 +79,6 @@ #include <asm/mach-types.h> #include <asm/dma.h> -#ifdef CONFIG_H3600_HAL -#include <asm/semaphore.h> -#include <asm/uaccess.h> -#include <asm/arch/h3600_hal.h> -#endif - #include <sound/core.h> #include <sound/pcm.h> #include <sound/initval.h> @@ -100,9 +94,6 @@ * We use DMA stuff from 2.4.18-rmk3-hh24 here to be able to compile this * module for Familiar 0.6.1 */ -#ifdef CONFIG_H3600_HAL -#define HH_VERSION 1 -#endif /* {{{ Type definitions */ @@ -238,11 +229,8 @@ static void sa11xx_uda1341_set_samplerat rate = 8000; /* Set the external clock generator */ -#ifdef CONFIG_H3600_HAL - h3600_audio_clock(rate); -#else + sa11xx_uda1341_set_audio_clock(rate); -#endif /* Select the clock divisor */ switch (rate) { @@ -307,13 +295,10 @@ static void sa11xx_uda1341_audio_init(st local_irq_restore(flags); /* Enable the audio power */ -#ifdef CONFIG_H3600_HAL - h3600_audio_power(AUDIO_RATE_DEFAULT); -#else + clr_sa11xx_uda1341_egpio(IPAQ_EGPIO_CODEC_NRESET); set_sa11xx_uda1341_egpio(IPAQ_EGPIO_AUDIO_ON); set_sa11xx_uda1341_egpio(IPAQ_EGPIO_QMUTE); -#endif /* Wait for the UDA1341 to wake up */ mdelay(1); //FIXME - was removed by Perex - Why? @@ -331,21 +316,13 @@ static void sa11xx_uda1341_audio_init(st /* make the left and right channels unswapped (flip the WS latch) */ Ser4SSDR = 0; -#ifdef CONFIG_H3600_HAL - h3600_audio_mute(0); -#else - clr_sa11xx_uda1341_egpio(IPAQ_EGPIO_QMUTE); -#endif + clr_sa11xx_uda1341_egpio(IPAQ_EGPIO_QMUTE); } static void sa11xx_uda1341_audio_shutdown(struct sa11xx_uda1341 *sa11xx_uda1341) { /* mute on */ -#ifdef CONFIG_H3600_HAL - h3600_audio_mute(1); -#else set_sa11xx_uda1341_egpio(IPAQ_EGPIO_QMUTE); -#endif /* disable the audio power and all signals leading to the audio chip */ l3_close(sa11xx_uda1341->uda1341); @@ -354,13 +331,9 @@ static void sa11xx_uda1341_audio_shutdow /* power off and mute off */ /* FIXME - is muting off necesary??? */ -#ifdef CONFIG_H3600_HAL - h3600_audio_power(0); - h3600_audio_mute(0); -#else + clr_sa11xx_uda1341_egpio(IPAQ_EGPIO_AUDIO_ON); clr_sa11xx_uda1341_egpio(IPAQ_EGPIO_QMUTE); -#endif } /* }}} */ _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
