At Tue, 31 Jul 2007 10:46:52 -0500, Timur Tabi wrote: > > This patch adds ALSA SoC support for the Cirrus Logic CS4270 codec. The > following features are suppored: > > 1) Stand-alone and software mode > 2) Software mode via I2C only > 3) Master mode, not Slave > 4) No power management > > Signed-off-by: Timur Tabi <timur@xxxxxxxxxxxxx> Thanks, it can be now applied fine. The only thing I noticed is below (oh I should have mentioned it before...): > diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig > index e5fb437..7824880 100644 > --- a/sound/soc/codecs/Kconfig > +++ b/sound/soc/codecs/Kconfig > @@ -17,3 +17,23 @@ config SND_SOC_WM8753 > config SND_SOC_WM9712 > tristate > depends on SND_SOC > + > +# Cirrus Logic CS4270 Codec > +config SND_SOC_CS4270 > + tristate > + depends on SND_SOC > + > +# Cirrus Logic CS4270 Codec Hardware Mute Support > +# Select if you have external muting circuitry attached to your CS4270. > +config SND_SOC_CS4270_HWMUTE > + bool > + depends on SND_SOC_CS4270 > + > +# Cirrus Logic CS4270 Codec VD = 3.3V Errata > +# Select if you are affected by the errata where the part will not function > +# if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will > +# not select any sample rates that require MCLK to be divided by 1.5. > +config SND_SOC_CS4270_VD33_ERRATA > + bool > + depends on SND_SOC_CS4270 > + I'd suggest to convert these comments to help texts. Also, usually the items to be chosen via menuconfig have tristate "XXXX" or bool "XXX" Could you fix them, then I'll finally merge it to upstream? thanks, Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
