At Tue, 10 Jul 2007 00:20:54 +0300,
Dan Aloni wrote:
>
> On Fri, Apr 20, 2007 at 04:28:09PM +0200, Takashi Iwai wrote:
> > At Fri, 20 Apr 2007 14:13:18 +0300,
> > Dan Aloni wrote:
> > >
> > > On Fri, Apr 20, 2007 at 01:00:03PM +0200, Takashi Iwai wrote:
> > > > At Fri, 20 Apr 2007 13:49:47 +0300,
> > > > Dan Aloni wrote:
> > > [...]
> > > > > case 4 originally does {1<=3,3<=2,2<=1}, my working fix effectively
> > > > > adds {1<=2,2<=1}, which means we need to do {1<=1,3<=2,2<=3}, or just
> > > > > {3<=2,2<=3}.
> > > > >
> > > > > Right?
> > > >
> > > > Sounds so. Could you attach the content of /proc/asound/card0/codec#*
> > > > file to re-check?
> > >
> > > Okay. I got the following output *with* my fix applied:
> >
> > Thanks. Apparently the default pin config values are wrong, so it's a
> > BIOS bug.
> >
> > I reread the pin-configuration spec and my last patch is correct. The
> > configuration of 7.1 outputs is Front/CLFE/Rear/Side. So, I committed
> > a patch to HG tree.
> >
> > Now about your fix. I think the best way is to override the pin
> > default configuration. The patch below is the fix on the top of the
> > latest ALSA HG tree. Use hg.alsa-project.org since
> > hg-mirror.alsa-project.org seems (again) out of sync right now.
>
> The patch works great with 2.6.22.
Thanks for confirmation. It's merged to ALSA HG tree now.
Takashi
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
