Re: at91 SoC Modifications

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Well, I have fanned out all 6 SSC lines to the codec now and have them
configured individually to create the desired effect. However, it is still
buggy. TF0 now does not activate properly when in capture mode. I get the
same type of waveform I received when I was using TF0 to attempt capture.
Nothing seems to work correctly except playback....and only when I have TF0
sent to the codec's frame receive and send pins.....

I want to look through the SoC code to where the SSC is activated/reset so I
can try to determine what is happening. I know the SSC works well with this
codec and want to figure out what I need to do to modify the code to make it
happen with ALSA as well. I hate the idea of going back to the drawing board
and trying to write my driver so that it uses the PDC, but the ALSA SoC is
simply not working well enough yet with the at91sam9260.

Does anyone know where I can find this code at?

Thanks.

Paul

-- 
***************************************
Paul David Kavan
Project Engineer
GRH Electronics, Inc.
402-734-4900
pkavan@xxxxxxxxx
***************************************
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux