Thanks Nobin, but I have few queries: 1. /proc/asound is as expected. 2. I have set my default mixer settings in driver itself, so can I bypass setting them once gain through mixer interface? Can I not use mixer interface currently? 3. What does alsa.conf do? What about .asoundrc ? I am not familier with these things and don't know how should I set them up if needed. 4. Basically, I have just configured and compiled the alsa-lib and utils and got them on the board. 5.When I use aplay directly then it just hangs at the very first step i.e. hangs after execv(aplay), strace showed it. On 6/22/07, Nobin Mathew <nobin.mathew@xxxxxxxxx> wrote: > First check the /proc/asound to see it is as expected. > > Then use amixer to set the setting > like enable playback/capture and set the volume etc. > > Now use aplay or arecord > > aplay/arecord --help will give more information > > Nobin > > On 6/22/07, Pharaoh . <pharaoh137@xxxxxxxxx> wrote: > > Hi > > I have to test my audio driver on an omap based board. I have got the lib > and > > utils on my board but dont know the exact steps to follow for using aplay > etc. > > > > Can anyone point me to relevant documentation? Couldn't find any. Or just > brief > > outline about the steops to follow would be great help. > > > > -pharaoh > > _______________________________________________ > > Alsa-devel mailing list > > Alsa-devel@xxxxxxxxxxxxxxxx > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel > > > _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
