Nathan Allen Stratton wrote: > [...] > So the issue now is that the audio is WAY to high so it is very distorted. > The audio is controlled via X9221A chips on the i2c bus at 0x50, there are > not drivers for X9221 so I can't lower the audio levels. There is a datasheet for these chips, so writing some code for this should be easy. However, the I2C controller is not managed by the snd-bt87x driver but by the bttv driver. Regards, Clemens _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
