On Thu, 2007-06-21 at 14:10 -0500, Paul Kavan wrote: > The playback side of everything seems to work well for .raw files. I > have some that I made with my old ssc polling driver. The sound fine > using aplay with either the bare bones or the default alsa.conf file. > However, I cannot use arecord at all. I am not sure why, but something > is preventing the sync line from working during record. The sync line > has a .3V,pp square that rides around 3V DC. The frequency is that of > the bit clock ~256.4K. Now, when I playback a sample, the RF0 and RD0 > look like they should. > > I have RF0 and TF0 tied together and assume TF0 generates the sync. > Also, I have TK0 and RK0 tied together and assume TK0 generates the > clock. Could this be the problem. > Best not to assume here, check the Atmel datasheet wrt SSC clocking. > Oh...and playback with PCM A (DSP_A) works fine, but no recording > still. I get the same type of signal on RF0 as before with PCM A fmt. > Does anyone have a sense if this is a ssc configuration problem or an > alsa problem? It's probably not an alsa problem as playback works. If your SSC register settings for capture look correct then I'd check the hardware again. Liam _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
