On 05/18/2007 12:14 PM, Alan Horstmann wrote: >> Could you "cat /proc/asound/card0/pcm0p/info" (replace the 0,0 with >> where your 6Fire PCM is at) and confirm that "subdevices_count" is >> larger than 1 to confirm it's HWMIXing in the ALSA sense? > > subdevices_count: 1 > Lee has explained this confusion:- this card has a hardware mixer but > does not do 'Hardware Mixing' in the Alsa sense! Thanks for that Lee! Thanks. Will leave out "HWMIX" from the ICE1712/1724 card tags. >>> The DMX6fire has both optical and phono SPDIF connectors >> Both both input and output? > > Yes. The two inputs can be switch selected; the outputs are in parallel. Thanks again, just added "RCAio" to the 6Fire. >> I've for example added "ANALOGio" to every single card on the TerraTec page >> which felt a bit silly. > > Actually as I understand it, the EWS88D is essentially digital (ADAT etc) only > though it seems to have a secondary low-grade audio out for system sounds > etc. You're right, just checked the manual. I see the driver creating a 8/16-bit 8-48 kHz "ICE1712 consumer" PCM that I suppose will be the one that ends up at that backplate analog out. The "low-grade" will be fairly relative so I'll leave in the ANALOGio tag for the ES88D as well. If someone reading this knows better, please yell... Rene. _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
