Takashi Iwai wrote:
>> defaults.namehint.showall on
>> and
>> defaults.namehint.!showall 1
>>
>> for my tests - my results are in the previous email.
>
> Hm, do you see any change in "aplay -L" output with and without this
> definition?
No, "aplay -L" gives the same list with or without the option. I tried
changing it in /usr/share/alsa/alsa.conf as well, but the change had no effect.
NB: this is with 1.0.14rc4.
nicholas@Nicholas:~$ aplay -L
default:CARD=V8237
VIA 8237, VIA 8237
Default Audio Device
front:CARD=V8237,DEV=0
VIA 8237, VIA 8237
Front speakers
surround40:CARD=V8237,DEV=0
VIA 8237, VIA 8237
4.0 Surround output to Front and Rear speakers
surround41:CARD=V8237,DEV=0
VIA 8237, VIA 8237
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=V8237,DEV=0
VIA 8237, VIA 8237
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=V8237,DEV=0
VIA 8237, VIA 8237
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
iec958:CARD=V8237,DEV=0
VIA 8237, VIA 8237
IEC958 (S/PDIF) Digital Audio Output
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=UART
MPU-401 UART
Default Audio Device
default:CARD=PAD
RME Digi96/8 PAD, Digi96 IEC958
Default Audio Device
nicholas@Nicholas:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: V8237 [VIA 8237], device 0: VIA 8237 [VIA 8237]
Subdevices: 4/4
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
card 0: V8237 [VIA 8237], device 1: VIA 8237 [VIA 8237]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: PAD [RME Digi96/8 PAD], device 0: Digi96 IEC958 [Digi96 IEC958]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: PAD [RME Digi96/8 PAD], device 1: Digi96 ADAT [Digi96 ADAT]
Subdevices: 1/1
Subdevice #0: subdevice #0
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
