Tobin, I downloaded and installed alsa-driver, alsa-lib and alsa-utils, but still no sound coming out of those speakers... I ran alsa-info.sh and the results are at http://pastebin.ca/451128 I am clueless as to what to do next, but I m ready to try anything. Any help would be greatly appreciated. Ben On 4/21/07, Tobin Davis < tdavis@xxxxxxxxxxxx> wrote: > > Try downloading a current daily snapshot from ftp://ftp.suse.com/pub/projects/alsa/snapshot/ > . > > There was an issue with the ATI HD Audio detection that was fixed after > 14rc3 was released. > > Tobin > > On Sat, 2007-04-21 at 16:00 +1000, Ben DiDonc wrote: > > The output of alsa-info.sh is available at http://pastebin.ca/451007 > > > On 4/21/07, *Tobin Davis* < tdavis@xxxxxxxxxxxx> wrote: > > Could you download an run http://bulletproof.servebeer.com/alsa/scripts/alsa-info.sh > , then post the resulting link? This will help determine what setup you > have. > > Tobin Davis > > > > On Sat, 2007-04-21 at 14:56 +1000, Ben DiDonc wrote: > > Hi I have a toshiba A100 (see attached file lspci-nnv) with a ATI SB450. > Sound worked fine with kernel 2.6.17 and alsa 1.0.12rc1 (ubuntu edgy). I > just did a fresh install of ubuntu feisty (kernel 2.6.20, alsa 1.0.14rc1) > and the only mixer settings available are those of the modem, named off-hook > and caller-id (see output of amixer, aplay -l , and the rest in attached > file output_feisty) I decided to upgrade alsa-driver and alsa-lib to > 1.0.14rc2. after downloading the package, I unloaded all sound related > modules (everything with "snd_" in it) in the right order and did: > ./configure --with-oss=yes --with-cards=hda-intel;make; sudo make install; > sudo modprobe snd_hda_intel A minor improvement: the mixer now shows > controls for both the modem and the sound card (see > output_after_upgrade_to_rc2), but unfortunately, there is still no sound > coming out of those speakers (even though alsamixer shows control for PCM > and the rest...). Finally, I downloaded alsa-driver-1.0.14rc3 and gave it > a shot. This time again, only modem related settings appeared in alsamixer, > and no sound card stuff (see aplay and amixer in > output_after_upgrade_to_rc3), and no sound either. Does anyone know how to > get some sound out of these speakers (given that it used to work with > alsa1.0.12rc1...) ? Thanks for your help Ben > > _______________________________________________Alsa-devel mailing listAlsa-devel@xxxxxxxxxxxxxxxxxxxx://mailman.alsa-project.org/mailman/listinfo/alsa-devel > > -- > Tobin Davis <tdavis@xxxxxxxxxxxx> > > > -- > Tobin Davis <tdavis@xxxxxxxxxxxx> > _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel