Really Cc: alsa-devel@xxxxxxxxxxxxxxxx Richard A Nelson napsal(a): > My son has an earlier version of the M2V & BIOS (0901) and his gets full > 6ch > sound. > > The 1.01G, and related BIOS (1304 or 1701) do not properly handle the > onboard sound: > hda_codec: Unknown model for ALC660VD/ALC861VD, trying auto-probe from > BIOS... What does your /proc/asound/version say? > it seems to truely be a BIOS issue, as I don't see a difference in lspci > -vvxxx between our systems: > > 80:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio > Controller (rev 10) > Subsystem: ASUSTeK Computer Inc. Unknown device 81e7 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step ping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 17 > Region 0: Memory at fbffc000 (64-bit, non-prefetchable) [size=16K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA > PME(D0+,D1-,D2-,D3ho t+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ > Queue=0/0 Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [70] Express Unknown type IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, > ExtTag- > Device: Latency L0s <64ns, L1 <1us > Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- > Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > Link: Supported Speed unknown, Width x0, ASPM unknown, > Port 0 > Link: Latency L0s <64ns, L1 <1us > Link: ASPM Disabled CommClk- ExtSynch- > Link: Speed unknown, Width x0 > 00: 06 11 88 32 06 00 10 00 10 00 03 04 10 00 00 00 > 10: 04 c0 ff fb 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 e7 81 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00 > 40: 00 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 01 60 42 c8 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 05 70 80 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 10 00 91 00 00 00 00 00 00 00 30 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > ALSA, instead of seeing ALC660, on my box sees ALC660-VD, with very > little in the way of devices (only front output) - which does not work > either :( > > Stumped on where to go from here... regards, -- http://www.fi.muni.cz/~xslaby/ Jiri Slaby faculty of informatics, masaryk university, brno, cz e-mail: jirislaby gmail com, gpg pubkey fingerprint: B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
