At Fri, 13 Apr 2007 00:23:22 +0300, Dan Aloni wrote: > > On Fri, Apr 13, 2007 at 12:11:41AM +0300, Dan Aloni wrote: > > On Thu, Apr 12, 2007 at 02:34:49PM +0200, Takashi Iwai wrote: > > > At Thu, 12 Apr 2007 13:09:59 +0300, > > > Dan Aloni wrote: > > > > > > > > Hello, > > > > > > > > Yesterday I posted this bug in the bugtracker: > > > > > > > > https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3013 > > > > > > > > I have received no reponse yet. > > > > > > > > I'd like to cooperate on solving this. > > > > > > Most of such problems are caused by buggy BIOS, as the driver tries > > > to set up based on BIOS information if the device is unknown. > > > > > > Did you try to pass model options for ALC882? > > > For example, model=3stack or model=6stack. > > > Also, position_fix option is worth try to fix some playback problems. > > > > Okay, so based on the 2.6.21-rc6 codebase: > > > > position_fix=1 fixed the clicks. > > BTW I had no success with any of the provided preset models - they were > less correct than the auto mode (e.g. no rear with 6stack-dig). OK, that's somewhat expected. > I also noticed that in the patch I accidently implemented position_fix=2, > but it seems to work okay too. Interesting. As default, the driver behaves as same as position_fix=2 (using a position-buffer), but with an additional check of validity. Then it falls back to position_fix=1. Maybe the validity check doesn't work well in your case. Or, it happens in some rare condition. Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
