At Mon, 26 Mar 2007 23:52:57 +0200 (CEST), dustin@xxxxxxxxx wrote: > > Hello, > > While going through AK4114 support I have hit the constant AK4114_DIF2 in ak4114.h . I would say its value should be (1<<6) according to AK4114 datasheet. > > This is current situation: > #define AK4114_DIF2 (1<<5) /* Audio Data Control */ > #define AK4114_DIF1 (1<<5) /* Audio Data Control */ > #define AK4114_DIF0 (1<<4) /* Audio Data Control */ > > I think cards using this code should experience related problems. E.g. in juli.c and revo.c the constant > #define AK4114_DIF_I24I2S (AK4114_DIF2|AK4114_DIF1|AK4114_DIF0) /* STDO: I2S; LRCLK, BICK = Input */ Wow, thanks for spotting out. Now fixed on HG tree. > is used, intended to set output serial data mode to I2S/slave perhaps compatible with ICE1712/24. This may be causing problems mentioned in revo.c: > > #if 0 > /* FIXME: ak4114 makes the sound much lower due to some confliction, > * so let's disable it right now... > */ > #define BUILD_AK4114_AP192 > #endif Right, this might be the cause. Unfortunately, I have no AP192 board here to test. Hopefully someone can test it soon... > I am trying to add support for SPDIF-IN of AudioTrak MI/ODI/O addon card (ice1724 + ak4114), hopefully this will be a little step forward. Let me know if you have any advance. Thanks! Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
