Hi, Takashi Iwai wrote: > At Fri, 16 Mar 2007 17:50:33 +0800, > Nicolas Boichat wrote: >> Hi, >> >> I just got this input from a Macmini user (subsys id: 0x106b0800), after >> asking him to try different pins settings. (the sound doesn't work >> properly with a vanilla 2.6.21-rc3 kernel) >> >> Tino Keitel wrote: >>> On Thu, Mar 15, 2007 at 18:12:30 +0800, Nicolas Boichat wrote: >>> >>> [...] >>> >>> >>>> Considered it worked with the mactel patches, you should try >>>> STAC_MACBOOK_PRO_V1 first.... >>>> >>> You are right, with STAC_MACBOOK_PRO_V1 I can use all required >>> features. Here are the results: >>> >>> - analog line in works, if "Line In as Output" is muted >>> >>> - analog line out works, it is controlled by the "Front" channel in >>> alsamixer >>> >>> - digital line out works >>> >>> - the internal speaker works, it is controlled by the "Master" channel >>> in alsamixer >>> >>> - the internal speaker is silent if there is an analog plug in line out >>> >>> - the internal speker still works if a (optical) digital cable is >>> plugged in line out, I guess because the optical plastic cable >>> doesn't short circuit the line out plug >>> >>> Minor glitches: >>> >>> There is an input selector that has the options "Line", "Mic" and >>> "Front Mic". However, I think that only "Line" is really usable, as I >>> had so signal when I connected a Mic to line in and a "Front Mic" is >>> also not present in the mini. >>> >>> There is a "Mic as output" switch in alsamixer, but there is not "Mic" >>> jack. >>> >> Considering these pins have been used for a long time on mactel-linux, > > Grrr, someone should have informed us. I didn't know of this. Sorry... Was quite busy recently, and I'm trying to get all our patches upstream now... >> and that they are working fine with MacBook (1st generation at least), >> Macmini and Macbook Pro (1st generation only), I think the following >> patch is appropriate (please apply it after the patch sent yesterday). > > But the glitches above don't appear on your macbook-pro-v1, right? Yeah I have some glitches too... For "Input source" I have "Front Mic", "Mic" and "Line", while only "Mic" and "Line" are useful. I also have a Mic as Output which is not relevant (no Mic jack)... I'll try to have a look at this. Also, to get the Mic to work, even if the "Input Source" is set to Mic at boot time, I have to switch to Line or Front Mic and then back to Mic. > Then I suppose macmini requires slightly different pin configs for > inputs. As for now, I think it's OK to use macbook-pro-v1 pin configs > for macmini since it's much better. So, how about to just keep the > models and change the pin definitions to use the same table? I saw your patch. Thx. Best regards, Nicolas ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-devel
