I wonder how could I get help on issues described below. Sound works only partially, the modem is recognized but does not work. Should I try to describe the issues better or enter a report into some bugzilla? R. On Wed, Jan 10, 2007 at 12:10:49AM +0100, Rafal Maszkowski wrote: > I use Fujitsu-Siemens Amilo Pro V3505 with > > 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) > > It has two codecs: > > Codec: Realtek ALC861 > > Codec: Motorola Si3054 > Vendor Id: 0x10573055 > > (a half-modem really). > > I started with kernel-2.6.18-1.2869.fc6 of Fedora 6 (alsa 1.0.12). I was able to play sound > but input, recording and modem were not working properly (modem was not visible at all). > > With recent hg sources all this works as follows: > > MODEM: > > rzm@rzm-ab:~,0# cat /proc/asound/card0/codec#1 > Codec: Motorola Si3054 > Address: 1 > Vendor Id: 0x10573055 > Subsystem Id: 0x10573055 > Revision Id: 0x100700 > rzm@rzm-ab:~,0# modprobe snd-intel8x0m > rzm@rzm-ab:~,1# /root/V3505/dead-end/slmodem-2.9.11-20061021/modem/slmodemd -a -c POLAND -d 4 modem:0 > SmartLink Soft Modem: version 2.9.11 Jan 6 2007 19:21:07 > <478.906438> SmartLink Soft Modem: version 2.9.11 Jan 6 2007 19:21:07 > <478.906494> modem:0: startup modem... > <478.906814> modem:0: update termios... > symbolic link `/dev/ttySL0' -> `/dev/pts/5' created. > modem `modem:0' created. TTY is `/dev/pts/5' > <478.908339> open file: /var/lib/slmodem/data.modem:0... > <478.965975> main: rt applyed: SCHED_FIFO, pri 99 > Use `/dev/ttySL0' as modem device, Ctrl+C for termination. > <519.422951> main: termios changed. > <519.422981> modem:0: update termios... > <535.201913> modem:0: run cmd: atdt0w202122 > <535.201947> modem:0: modem dial: t0w202122... > <535.201961> modem:0: modem_dial_start... > <535.201974> call: create... > <535.201992> CallProgFP_Create >> > <535.202004> APPLY_FILTER = 0 > <535.202018> Detection Thresholds: levle_fix=45,--> LEVEL_THRESHOLD=90 > <535.202032> ============> 0 > <535.202044> Cadence: Busy Tone loose detection is 0 > <535.202059> TYPE BUSY > <535.202071> Filter index 0 > <535.202082> Filter SubIndex 0 > <535.202094> MAX_ON_TIME 30 Buffers MIN_ON_TIME 5 Buffers > <535.202106> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 5 Buffers > <535.202119> OFF_TIME_THAT_RESETS_CYCLE 90 > <535.202131> BUFFER LENGTH 160 samples. > <535.202143> INTEGRATION_LENGTH 0[ms] > <535.202155> LEVEL 90 > <535.202171> INTEGRATION_TIME = 0 Buffers. > <535.202185> Detection Thresholds: levle_fix=45,--> LEVEL_THRESHOLD=90 > <535.202200> TYPE DIAL > <535.202211> Filter index 5 > <535.202223> Filter SubIndex 0 > <535.202234> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers > <535.202246> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers > <535.202259> OFF_TIME_THAT_RESETS_CYCLE 0 > <535.202271> BUFFER LENGTH 666 samples. > <535.202283> INTEGRATION_LENGTH 800[ms] > <535.202294> LEVEL 90 > <535.202308> INTEGRATION_TIME = 8 Buffers. > <535.202323> CALLPROG Create << > <535.202335> CALLPROG Dialing t0w202122 > <535.202348> Configuration->tone_DigitLength 100 > <535.202360> Configuration->pulse_OffHookTime 33 > <535.202372> Configuration->pulse_OnHookTime 67 > <535.202384> Configuration->dialPauseTime 4 > <535.202396> Configuration->flashTime 9 > <535.202408> Configuration->toneOrPulseFlag 0 > <535.202420> Configuration->dialModifierValidationFlag 1 > <535.202432> Configuration->ABCD_PermittedFlag 0 > <535.202444> Configuration->pulseAndToneInSameStringPermittedFlag 0 > <535.202456> Configuration->callingToneFlag 0 > <535.202468> Configuration->commaPauseDurLimit 30 > <535.202480> Configuration->digitPattern 1 > <535.202492> Configuration->tone_BetweenDigitsInterval 100 > <535.202504> Configuration->pulse_BetweenDigitsInterval 800 > <535.202516> DTMF_Gain1 = 13014 > <535.202528> DTMF_Gain2 = 16384 > <535.202541> AnalyzeDialString: Updated 17 May 1999 00:50 > <535.202553> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 8 > <535.202565> Dial String Syntax is VALID > <535.202580> GetNoAnswerTimeOut. 60 > <535.202593> WAIT DIAL TIMEOUT = 4 > <535.202605> CALLPROG_Dial was exited. > <535.202616> call: create RC: 9600 <-> 8000... > <535.202633> modem:0: modem_start.. > <535.202645> modem:0: modem set state: 1 --> 2... > <535.202659> modem:0: new state: DP_ESTAB > <535.202672> main: alsa_ioctl: cmd 8, arg 3... > <535.202685> modem:0: modem set hook: 0 --> 1... > <535.202697> main: alsa_ioctl: cmd 2, arg 1... > <535.203833> main: alsa_ioctl: cmd 11, arg 0... > <535.204067> main: alsa_ioctl: cmd 4, arg 2580... > <535.204084> main: alsa_ioctl: cmd 7, arg 30... > <535.204097> main: alsa_start... > error: cannot setup hw params for playback: Invalid argument > <535.205906> err: modem:0: modem start = -22: cannot start device. > <535.205922> modem:0: modem_stop.. > <535.205934> modem:0: modem set hook: 1 --> 0... > <535.205947> main: alsa_ioctl: cmd 2, arg 0... > <535.207825> main: alsa_ioctl: cmd 8, arg 0... > <535.207846> call: delete... > <535.207860> Dialer was aborted. > <535.207871> CALLPROG_Delete is entered > <535.207883> cadence_delete with CADENCE_DIAL_OBJ is invoked > <535.207896> cadence_delete with CADENCE_OBJ is invoked > <535.207908> CALLPROG_Delete is exited > <535.207922> modem:0: modem set state: 2 --> 1... > <535.207936> modem:0: new state: MODEM_IDLE > <535.207948> modem:0: modem report result: 3 (NO CARRIER) > <535.207976> modem:0: modem report result: 4 (ERROR) > <544.892326> main: termios changed. > <544.892355> modem:0: update termios... > <544.892382> main: pty closed. > > The above log shows an attempt to dial: > > rzm@rzm-ab:~,0# cu -l /dev/ttySL0 -s 115200 > Connected. > atdt0w202122 > NO CARRIER > ERROR > ~. > Disconnected. > > dmesg shows: > ALSA /usr/src/sound/hg/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:1153: hda-intel: invalid format_val, rate=9600, ch=1, format=2 > > SOUND: > > dmesg: > hda_codec: Unknown model for ALC861, trying auto-probe from BIOS... > ALSA /usr/src/sound/hg/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:556: hda_intel: azx_get_response timeout, switching to polling mode... > > alsamixer: > +---------------------------------------------------[AlsaMixer v1.0.12 (Press Escape to quit)]----------------------------------------------------+ > | Card: HDA Intel | > | Chip: Realtek ALC861 | > | View: Playback Capture [All] | > | Item: Capture [dB gain=-6.00, -6.00] | > ... > | +--+ +--+ +--+ | > ... > | +--+ +--+ +--+ +--+ +--+ Mic +--+ | > | |OO| |MM| |MM| |MM| |MM| | > | +--+ +--+ +--+ L R +--+ +--+ | > | CAPTUR | > | 0<>0 0<>0 0<>0 | > | Front Front Mi Mic <Capture > Caller I Input So Off-hook | > ... > +-------------------------------------------------------------------------------------------------------------------------------------------------+ > > There is no PCM slider. > > The other possible input source is Front Mic. > > Playing works. Recording works - I have not checked yet what is really > recorded. > > Listening to the sounds coming from the input: THe line input and built in > microphone are mixed. Volume of this mixture can be regulated with Front Mic or > Mic regulation. Each of them takes over the level, i.e. when one of them is set > to lower level setting the other set the sound level. When the second one is > left at high level moving the first even slightly sets the level (to this lower > value). > > rzm@rzm-ab:~,0# cat /proc/asound/card0/codec#0 > Codec: Realtek ALC861 > Address: 0 > Vendor Id: 0x10ec0861 > Subsystem Id: 0x17c01205 > Revision Id: 0x100300 > Default PCM: > rates [0x140]: 48000 96000 > bits [0xe]: 16 20 24 > formats [0x1]: PCM > Default Amp-In caps: N/A > Default Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > Node 0x03 [Audio Output] wcaps 0x405: Stereo Amp-Out > Amp-Out caps: N/A > Amp-Out vals: [0x00 0x00] > Power: 0x0 > Node 0x04 [Audio Output] wcaps 0x405: Stereo Amp-Out > Amp-Out caps: N/A > Amp-Out vals: [0x80 0x80] > Power: 0x0 > Node 0x05 [Audio Output] wcaps 0x405: Stereo Amp-Out > Amp-Out caps: N/A > Amp-Out vals: [0x80 0x80] > Power: 0x0 > Node 0x06 [Audio Output] wcaps 0x405: Stereo Amp-Out > Amp-Out caps: N/A > Amp-Out vals: [0x80 0x80] > Power: 0x0 > Node 0x07 [Audio Output] wcaps 0x605: Stereo Digital Amp-Out > Amp-Out caps: N/A > Amp-Out vals: [0x00 0x00] > Power: 0x0 > Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In > Amp-In caps: ofs=0x02, nsteps=0x0d, stepsize=0x0b, mute=1 > Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] > PCM: > rates [0x140]: 48000 96000 > bits [0x2]: 16 > formats [0x1]: PCM > Power: 0x0 > Connection: 6 > 0x0d* 0x0c 0x0f 0x10 0x11 0x15 > Node 0x09 [Vendor Defined Widget] wcaps 0xf00000: Mono > Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono > Node 0x0b [Pin Complex] wcaps 0x400581: Stereo > Pincap 0x081f: OUT HP Detect > Pin Default 0x01014110: [Jack] Line Out at Ext Rear > Conn = 1/8, Color = Green > Pin-ctls: 0x40: OUT > Power: 0x0 > Connection: 1 > 0x16 > Node 0x0c [Pin Complex] wcaps 0x400581: Stereo > Pincap 0x0837: IN OUT Detect > Pin Default 0x411111f0: [N/A] Speaker at Ext Rear > Conn = 1/8, Color = Black > Pin-ctls: 0x20: IN > Power: 0x0 > Connection: 1 > 0x19 > Node 0x0d [Pin Complex] wcaps 0x400581: Stereo > Pincap 0x08337: IN OUT Detect > Pin Default 0x01a19c2e: [Jack] Mic at Ext Rear > Conn = 1/8, Color = Pink > Pin-ctls: 0x24: IN > Power: 0x0 > Connection: 1 > 0x18 > Node 0x0e [Pin Complex] wcaps 0x400581: Stereo > Pincap 0x0817: OUT Detect > Pin Default 0x411111f0: [N/A] Speaker at Ext Rear > Conn = 1/8, Color = Black > Pin-ctls: 0x40: OUT > Power: 0x0 > Connection: 1 > 0x19 > Node 0x0f [Pin Complex] wcaps 0x400581: Stereo > Pincap 0x0833f: IN OUT HP Detect > Pin Default 0x411111f0: [N/A] Speaker at Ext Rear > Conn = 1/8, Color = Black > Pin-ctls: 0x40: OUT > Power: 0x0 > Connection: 1 > 0x1a > Node 0x10 [Pin Complex] wcaps 0x400581: Stereo > Pincap 0x0833f: IN OUT HP Detect > Pin Default 0x99a30120: [Fixed] Mic at Int ATAPI > Conn = ATAPI, Color = Unknown > Pin-ctls: 0x24: IN > Power: 0x0 > Connection: 1 > 0x1b > Node 0x11 [Pin Complex] wcaps 0x400001: Stereo > Pincap 0x0863: IN > Pin Default 0x411111f0: [N/A] Speaker at Ext Rear > Conn = 1/8, Color = Black > Pin-ctls: 0x00: > Node 0x12 [Pin Complex] wcaps 0x400301: Stereo Digital > Pincap 0x0810: OUT > Pin Default 0x411111f0: [N/A] Speaker at Ext Rear > Conn = 1/8, Color = Black > Pin-ctls: 0x40: OUT > Connection: 1 > 0x07 > Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono > Node 0x14 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In > Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > Amp-In vals: [0x00 0x00] [0x00 0x00] > Connection: 2 > 0x0d 0x10 > Node 0x15 [Audio Mixer] wcaps 0x20050f: Stereo Amp-In Amp-Out > Amp-In caps: ofs=0x0c, nsteps=0x17, stepsize=0x0b, mute=1 > Amp-In vals: [0x00 0x00] [0x80 0x80] [0x00 0x00] > Amp-Out caps: ofs=0x0c, nsteps=0x0c, stepsize=0x0b, mute=1 > Amp-Out vals: [0x0c 0x0c] > Power: 0x0 > Connection: 3 > 0x11 0x14 0x1c > Node 0x16 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In > Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > Amp-In vals: [0x00 0x00] [0x00 0x00] > Connection: 2 > 0x03 0x15 > Node 0x17 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In > Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > Amp-In vals: [0x00 0x00] [0x00 0x00] > Connection: 2 > 0x04 0x15 > Node 0x18 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In > Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > Amp-In vals: [0x00 0x00] [0x00 0x00] > Connection: 2 > 0x05 0x15 > Node 0x19 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In > Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > Amp-In vals: [0x00 0x00] [0x00 0x00] > Connection: 2 > 0x06 0x15 > Node 0x1a [Audio Mixer] wcaps 0x20010b: Stereo Amp-In > Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > Amp-In vals: [0x80 0x80] [0x80 0x80] [0x00 0x00] [0x00 0x00] > Connection: 4 > 0x04 0x06 0x15 0x03 > Node 0x1b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In > Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > Amp-In vals: [0x80 0x80] [0x80 0x80] [0x00 0x00] [0x00 0x00] > Connection: 4 > 0x04 0x06 0x15 0x03 > Node 0x1c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In > Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > Amp-In vals: [0x00 0x00] [0x00 0x00] > Connection: 2 > 0x0c 0x0f > Node 0x1d [Vendor Defined Widget] wcaps 0xf00000: Mono > Node 0x1e [Vendor Defined Widget] wcaps 0xf00000: Mono > Node 0x1f [Pin Complex] wcaps 0x400581: Stereo > Pincap 0x0817: OUT Detect > Pin Default 0x411111f0: [N/A] Speaker at Ext Rear > Conn = 1/8, Color = Black > Pin-ctls: 0x40: OUT > Power: 0x0 > Connection: 1 > 0x18 > Node 0x20 [Pin Complex] wcaps 0x400581: Stereo > Pincap 0x0817: OUT Detect > Pin Default 0x411111f0: [N/A] Speaker at Ext Rear > Conn = 1/8, Color = Black > Pin-ctls: 0x40: OUT > Power: 0x0 > Connection: 1 > 0x17 > Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono > Node 0x22 [Vendor Defined Widget] wcaps 0xf00000: Mono > Node 0x23 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out > Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1 > Amp-Out vals: [0x8f] ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-devel
