On Thu, 2006-12-21 at 13:34 -0800, Allyn, Mark A wrote:
> Folks:
>
> Do any of you know if there is support for the Sigmatel STAC 9202
> Codec? (ID 8384:7642) I tried the latest release of alsa (1.0.14rc1)
> and it did not work.
It's actually 8384:7632 in your codec.out.
This is another patch I've been working on. It was added after
1.0.14rc1.
I've attached it for you. Let me know if it works.
Also, what is the subsystem id for this? (lspci -v|fgrep -A1 Audio)
--
Tobin Davis <tdavis@xxxxxxxxxxxx>
diff -r 1ede4dc9b6ea pci/hda/patch_sigmatel.c
--- a/pci/hda/patch_sigmatel.c Sun Dec 10 00:00:38 2006 +0000
+++ b/pci/hda/patch_sigmatel.c Mon Dec 11 09:37:26 2006 -0800
@@ -48,6 +48,11 @@ enum {
};
enum {
+ STAC_925x_REF,
+ STAC_925x_MODELS
+};
+
+enum {
STAC_D945_REF,
STAC_D945GTP3,
STAC_D945GTP5,
@@ -129,6 +134,18 @@ static hda_nid_t stac9200_dac_nids[1] =
0x02,
};
+static hda_nid_t stac925x_adc_nids[1] = {
+ 0x03,
+};
+
+static hda_nid_t stac925x_mux_nids[1] = {
+ 0x0f,
+};
+
+static hda_nid_t stac925x_dac_nids[1] = {
+ 0x02,
+};
+
static hda_nid_t stac922x_adc_nids[2] = {
0x06, 0x07,
};
@@ -160,6 +177,11 @@ static hda_nid_t stac9200_pin_nids[8] =
static hda_nid_t stac9200_pin_nids[8] = {
0x08, 0x09, 0x0d, 0x0e,
0x0f, 0x10, 0x11, 0x12,
+};
+
+static hda_nid_t stac925x_pin_nids[8] = {
+ 0x07, 0x08, 0x0a, 0x0b,
+ 0x0c, 0x0d, 0x10, 0x11,
};
static hda_nid_t stac922x_pin_nids[10] = {
@@ -238,6 +260,12 @@ static struct hda_verb stac9200_core_ini
static struct hda_verb stac9200_core_init[] = {
/* set dac0mux for dac converter */
{ 0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {}
+};
+
+static struct hda_verb stac925x_core_init[] = {
+ /* set dac0mux for dac converter */
+ { 0x06, AC_VERB_SET_CONNECT_SEL, 0x00},
{}
};
@@ -283,6 +311,23 @@ static struct snd_kcontrol_new stac9200_
HDA_CODEC_VOLUME("Capture Volume", 0x0a, 0, HDA_OUTPUT),
HDA_CODEC_MUTE("Capture Switch", 0x0a, 0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Capture Mux Volume", 0x0c, 0, HDA_OUTPUT),
+ { } /* end */
+};
+
+static struct snd_kcontrol_new stac925x_mixer[] = {
+ HDA_CODEC_VOLUME("Master Playback Volume", 0xe, 0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Master Playback Switch", 0xe, 0, HDA_OUTPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Input Source",
+ .count = 1,
+ .info = stac92xx_mux_enum_info,
+ .get = stac92xx_mux_enum_get,
+ .put = stac92xx_mux_enum_put,
+ },
+ HDA_CODEC_VOLUME("Capture Volume", 0x09, 0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x09, 0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Capture Mux Volume", 0x0f, 0, HDA_OUTPUT),
{ } /* end */
};
@@ -408,6 +453,30 @@ static struct snd_pci_quirk stac9200_cfg
"Dell Latitude D620", STAC_REF),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01cb,
"Dell Latitude 120L", STAC_REF),
+ {} /* terminator */
+};
+
+static unsigned int ref925x_pin_configs[8] = {
+ 0x40c003f0, 0x424503f2, 0x01813022, 0x02a19021,
+ 0x90a70320, 0x02214210, 0x400003f1, 0x9033032e,
+};
+
+static unsigned int *stac925x_brd_tbl[STAC_925x_MODELS] = {
+ [STAC_REF] = ref925x_pin_configs,
+};
+
+static const char *stac925x_models[STAC_925x_MODELS] = {
+ [STAC_REF] = "ref",
+};
+
+static struct snd_pci_quirk stac925x_cfg_tbl[] = {
+ /* SigmaTel reference board */
+ SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
+ "DFI LanParty", STAC_REF),
+ SND_PCI_QUIRK(0x107b, 0x0366, "Gateway MP6954",
+ STAC_REF),
+ SND_PCI_QUIRK(0x107b, 0x0367, "Gateway MX6453",
+ STAC_REF),
{} /* terminator */
};
@@ -1699,6 +1768,56 @@ static int patch_stac9200(struct hda_cod
return 0;
}
+static int patch_stac925x(struct hda_codec *codec)
+{
+ struct sigmatel_spec *spec;
+ int err;
+
+ spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ if (spec == NULL)
+ return -ENOMEM;
+
+ codec->spec = spec;
+ spec->num_pins = 8;
+ spec->pin_nids = stac925x_pin_nids;
+ spec->board_config = snd_hda_check_board_config(codec, STAC_925x_MODELS,
+ stac925x_models,
+ stac925x_cfg_tbl);
+ if (spec->board_config < 0) {
+ snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC925x, using BIOS defaults\n");
+ err = stac92xx_save_bios_config_regs(codec);
+ if (err < 0) {
+ stac92xx_free(codec);
+ return err;
+ }
+ spec->pin_configs = spec->bios_pin_configs;
+ } else {
+ spec->pin_configs = stac925x_brd_tbl[spec->board_config];
+ stac92xx_set_config_regs(codec);
+ }
+
+ spec->multiout.max_channels = 2;
+ spec->multiout.num_dacs = 1;
+ spec->multiout.dac_nids = stac925x_dac_nids;
+ spec->adc_nids = stac925x_adc_nids;
+ spec->mux_nids = stac925x_mux_nids;
+ spec->num_muxes = 1;
+ spec->num_dmics = 0;
+
+ spec->init = stac925x_core_init;
+ spec->mixer = stac925x_mixer;
+
+ err = stac9200_parse_auto_config(codec);
+ if (err < 0) {
+ stac92xx_free(codec);
+ return err;
+ }
+
+ codec->patch_ops = stac92xx_patch_ops;
+
+ return 0;
+}
+
static int patch_stac922x(struct hda_codec *codec)
{
struct sigmatel_spec *spec;
@@ -2137,6 +2256,10 @@ struct hda_codec_preset snd_hda_preset_s
{ .id = 0x83847627, .name = "STAC9271D", .patch = patch_stac927x },
{ .id = 0x83847628, .name = "STAC9274X5NH", .patch = patch_stac927x },
{ .id = 0x83847629, .name = "STAC9274D5NH", .patch = patch_stac927x },
+ { .id = 0x83847634, .name = "STAC9250", .patch = patch_stac925x },
+ { .id = 0x83847635, .name = "STAC9250D", .patch = patch_stac925x },
+ { .id = 0x83847636, .name = "STAC9251", .patch = patch_stac925x },
+ { .id = 0x83847637, .name = "STAC9250D", .patch = patch_stac925x },
/* The following does not take into account .id=0x83847661 when subsys =
* 104D0C00 which is STAC9225s. Because of this, some SZ Notebooks are
* currently not fully supported.
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/alsa-devel
