Tobin: Here are the dmesg outputs and codec outputs as well. I did notice a slide for 'internal', but I could not activate the capture for that slider. Mark ________________________________ From: Tobin Davis [mailto:tdavis@xxxxxxxxxxxx] Sent: Thursday, December 07, 2006 3:24 PM To: Allyn, Mark A Cc: alsa-devel@xxxxxxxxxxxxxxxx Subject: RE: Samsung Audio Problem (update) Could you send the new dmesg output as well as the output from cat /proc/asound/card0/codec#0? I'm assuming you compiled the driver with "--with-debug=detect"? I need to see what the driver reports after loading. Thanks, Tobin On Thu, 2006-12-07 at 14:03 -0800, Allyn, Mark A wrote: Tobin: I did apply the patch as you suggest. The dmesg from the modprobe of the snd-hda-intel does show the ultra (Samsung) loading. However, there is still no recording. I set all of the sliders on 100 percent and I made sure that the capture is on both mike and capture. Audio playback of existing audio files is okay. Mark ________________________________ From: Tobin Davis [mailto:tdavis@xxxxxxxxxxxx] Sent: Wednesday, December 06, 2006 3:31 PM To: Allyn, Mark A Cc: alsa-devel@xxxxxxxxxxxxxxxxxxxxx Subject: RE: Samsung Audio Problem (update) Mark, After looking through the documentation and the Windows regestry settings for that system's driver, I found some interesting differences to the microphone selector. Try this patch against the alsa-driver-hg20061130 snapshot (ftp://ftp.suse.com/pub/projects/alsa/snapshot/driver/alsa-driver-hg2006 1129.tar.bz2). To apply: tar -jxvf alsa-driver-hg20061130.tar.bz2 cd alsa-driver-hg20061130/alsa-kernel patch -p1 <SamsungQ1.patch cd .. ./configure --with-cards=hda-intel --with-debug=detect ; make ; make install Let me know if this fixes your microphone. I also added the subdevice id so you shouldn't need to add any model parameters. Tobin On Tue, 2006-12-05 at 10:46 -0800, Allyn, Mark A wrote: Tobin: Here is the result of the debug=detect & codec#0: ===================================================== [17179640.512000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [17179640.544000] ALSA /mnt1/src/asianux/BUILD/alsa-driver-hg20061130/pci/hda/../.. /alsa-kernel/pci/hda/hda_intel.c:696: codec_mask = 0x1 [17179640.740000] ALSA /mnt1/src/asianux/BUILD/alsa-driver-hg20061130/pci/hda/hda_codec.c:1743: hda_codec: model 'laptop-eapd' is selected ======================================================================== output of codec#0 Codec: Analog Devices AD1986A Address: 0 Vendor Id: 0x11d41986 Subsystem Id: 0x144dc027 Revision Id: 0x100500 Default PCM: rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital PCM: rates [0x60]: 44100 48000 bits [0x2]: 16 formats [0x5]: PCM AC3 Connection: 2 0x01* 0x06 Node 0x03 [Audio Output] wcaps 0x44d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Power: 0x0 Node 0x04 [Audio Output] wcaps 0x40d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Power: 0x0 Node 0x05 [Audio Output] wcaps 0x40d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Power: 0x0 Node 0x06 [Audio Input] wcaps 0x100511: Stereo PCM: rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000 bits [0x6]: 16 20 formats [0x1]: PCM Power: 0x0 Connection: 1 0x12 Node 0x07 [Audio Mixer] wcaps 0x200101: Stereo Connection: 8 0x03 0x09 0x13 0x14 0x15 0x16 0x17 0x18 Node 0x08 [Audio Mixer] wcaps 0x200100: Mono Connection: 1 0x07 Node 0x09 [Audio Mixer] wcaps 0x20010e: Mono Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80] [0x80] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80] Connection: 2 0x04 0x05 Node 0x0a [Audio Selector] wcaps 0x300101: Stereo Connection: 3 0x07* 0x04 0x05 Node 0x0b [Audio Selector] wcaps 0x300101: Stereo Connection: 2 0x07* 0x04 Node 0x0c [Audio Selector] wcaps 0x300101: Stereo Connection: 2 0x04* 0x07 Node 0x0d [Audio Selector] wcaps 0x300101: Stereo Connection: 2 0x05* 0x08 Node 0x0e [Audio Selector] wcaps 0x300100: Mono Connection: 2 0x08* 0x11 Node 0x0f [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 8 0x1f* 0x20 0x1d 0x1d 0x27 0x28 0x29 0x2a Node 0x10 [Audio Selector] wcaps 0x300101: Stereo Connection: 3 0x20* 0x1c 0x1f Node 0x11 [Audio Selector] wcaps 0x300941: Stereo Connection: 2 0x0f* 0x2b Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 8 0x11* 0x22 0x00 0x21 0x10 0x07 0x08 0x23 Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x11 Node 0x14 [Audio Selector] wcaps 0x30010c: Mono Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80] Connection: 1 0x23 Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x22 Node 0x16 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x21 Node 0x17 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x10 Node 0x18 [Audio Selector] wcaps 0x30010c: Mono Amp-Out Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1 Amp-Out vals: [0x8f] Connection: 2 0x19* 0x24 Node 0x19 [Beep Generator Widget] wcaps 0x700000: Mono Node 0x1a [Pin Complex] wcaps 0x400185: Stereo Amp-Out Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x081f: OUT HP Detect Pin Default 0x02214021: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green Pin-ctls: 0xc0: OUT HP Connection: 1 0x0a Node 0x1b [Pin Complex] wcaps 0x400185: Stereo Amp-Out Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x081001f: OUT HP EAPD Detect Pin Default 0x01014011: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green Pin-ctls: 0x40: OUT Connection: 1 0x0b Node 0x1c [Pin Complex] wcaps 0x400185: Stereo Amp-Out Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0837: IN OUT Detect Pin Default 0x41013012: [N/A] Line Out at Ext Rear Conn = 1/8, Color = Blue Pin-ctls: 0x40: OUT Connection: 1 0x0c Node 0x1d [Pin Complex] wcaps 0x400985: Stereo Amp-Out Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x081737: IN OUT Detect Pin Default 0x01019015: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Pink Pin-ctls: 0x40: OUT Connection: 1 0x0d Node 0x1e [Pin Complex] wcaps 0x400104: Mono Amp-Out Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80] Pincap 0x0810: OUT Pin Default 0x511710f0: [N/A] Speaker at Int Rear Conn = Analog, Color = Black Pin-ctls: 0x40: OUT Connection: 1 0x0e Node 0x1f [Pin Complex] wcaps 0x400081: Stereo Pincap 0x081727: IN Detect Pin Default 0x02a190f0: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink Pin-ctls: 0x24: IN Node 0x20 [Pin Complex] wcaps 0x400081: Stereo Pincap 0x081727: IN Detect Pin Default 0x418130f0: [N/A] Line In at Ext Rear Conn = 1/8, Color = Blue Pin-ctls: 0x20: IN Node 0x21 [Pin Complex] wcaps 0x400081: Stereo Pincap 0x0827: IN Detect Pin Default 0x5997e0f0: [N/A] Aux at Int ATAPI Conn = Analog, Color = White Pin-ctls: 0x20: IN Node 0x22 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x593310f0: [N/A] CD at Int ATAPI Conn = ATAPI, Color = Black Pin-ctls: 0x20: IN Node 0x23 [Pin Complex] wcaps 0x400000: Mono Pincap 0x0820: IN Pin Default 0x59b770f0: [N/A] Telephony at Int ATAPI Conn = Analog, Color = Yellow Pin-ctls: 0x20: IN Node 0x24 [Pin Complex] wcaps 0x400000: Mono Pincap 0x0820: IN Pin Default 0x51f710f0: [N/A] Other at Int Rear Conn = Analog, Color = Black Pin-ctls: 0x20: IN Node 0x25 [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x0810: OUT Pin Default 0x4145f0f0: [N/A] SPDIF Out at Ext Rear Conn = Optical, Color = Other Pin-ctls: 0x40: OUT Connection: 1 0x02 Node 0x26 [Power Widget] wcaps 0x500500: Mono Power: 0x0 Connection: 8 0x07* 0x08 0x13 0x14 0x15 0x16 0x17 0x18 Node 0x27 [Audio Mixer] wcaps 0x200101: Stereo Connection: 2 0x1f 0x1d Node 0x28 [Audio Mixer] wcaps 0x200101: Stereo Connection: 2 0x1f 0x20 Node 0x29 [Audio Mixer] wcaps 0x200101: Stereo Connection: 2 0x1d 0x20 Node 0x2a [Audio Mixer] wcaps 0x200101: Stereo Connection: 3 0x1f 0x1d 0x20 Node 0x2b [Audio Mixer] wcaps 0x200100: Mono Connection: 1 0x0f ====================================================== ________________________________ From: Tobin Davis [mailto:tdavis@xxxxxxxxxxxx] Sent: Tuesday, December 05, 2006 7:26 AM To: Allyn, Mark A Cc: alsa-devel@xxxxxxxxxxxxxxxxxxxxx Subject: Re: Samsung Audio Problem (update) Could you send a couple of things to the mailing list? Specifically, recompile the driver with "--with-debug=detect", reinstall it, and send the output from dmesg after installing the driver. Also, send the output from 'cat /proc/asound/card0/codec*'. I have a laptop (Asus Z62F) with the exact same codec, and I had to do some fiddling with the alsamixer controls before I could use either the internal mic or the external mic. You might also check that. The mic gain is listed as an output for some reason (it's been marked as "fixme" in the code for quite some time). Tobin On Mon, 2006-12-04 at 13:43 -0800, Allyn, Mark A wrote: Hello: With thanks to Tobin Davis, I was able to resolve part of my problem. With using the latest snapshot of the alsa driver as well as adding options snd-hda-intel model=laptop-eapd to the /etc/modprobe.conf file, I was able to get rid of the high pitched squeal and have proper audio playback on the internal speakers. I am still unable to record. For your benefit, I do have some more Information on the audio device. From the lspci -qn, I got: Class: 0403 8086:2668 rev03 Subsystem: 144D:C027 Has anyone got audio recording working on this codec and subsystem? Thank you Mark Allyn ------------------------------------------------------------------------ - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDE V _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-devel -- Tobin Davis <tdavis@xxxxxxxxxxxx>
Attachment:
codec
Description: codec
Attachment:
dmesg
Description: dmesg
------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-devel
