This patch file adds communication protocol with maemo SDK audio system.
Signed-off-by: Eduardo Valentin <eduardo.valentin@xxxxxxxxxxx>
diffstat:
dsp-protocol.c | 1246 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
dsp-protocol.h | 88 ++++
2 files changed, 1334 insertions(+)
--
Eduardo Bezerra Valentin
diff -pruN a/maemo/dsp-protocol.c b/maemo/dsp-protocol.c
--- a/maemo/dsp-protocol.c 1969-12-31 20:00:00.000000000 -0400
+++ b/maemo/dsp-protocol.c 2006-11-01 11:50:37.000000000 -0400
@@ -0,0 +1,1246 @@
+/**
+ * @file dsp-protocol.c
+ * @brief Protocol to communicate with DSP side.
+ * <p>
+ * Copyright (C) 2006 Nokia Corporation
+ * <p>
+ * Contact: Eduardo Bezerra Valentin <eduardo.valentin@xxxxxxxxxxx>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Library General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Library General Public License for more details.
+ *
+ * You should have received a copy of the GNU Library General Public
+ * License along with this library; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ * */
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <poll.h>
+#include <sys/errno.h>
+#include <sys/types.h>
+#include <sys/uio.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <sys/mman.h>
+#include <math.h>
+#include <sys/ioctl.h>
+#include <sys/sem.h>
+
+#include "dsp-protocol.h"
+#include "constants.h"
+#include "debug.h"
+#include "types.h"
+#include "reporting.h"
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#ifdef USE_RESOURCE_MANAGER
+#define DBUS_API_SUBJECT_TO_CHANGE
+#include <dbus/dbus.h>
+#define AUDIO_PM_SERVICE "com.nokia.osso_audio_pm"
+#define AUDIO_PM_PLAYBACK_RESOURCE "/com/nokia/osso/pm/audio/playback"
+#define AUDIO_PM_RECORD_RESOURCE "/com/nokia/osso/pm/audio/record"
+#define RESOURCE_INTERFACE "com.nokia.osso_resource_manager"
+#define RESOURCE_TIMEOUT 200
+#endif /* USE_RESOURCE_MANAGER */
+
+#define MAGIC_NUMBER 0x00A3D70A
+#define PANNING_STEP 0x06
+#define TASK_IOCTL_LOCK 0x10002
+#define TASK_IOCTL_UNLOCK 0x10003
+/* internal datatypes declarations */
+union semun {
+ int val; /* value for SETVAL */
+ struct semid_ds *buf; /* buffer for IPC_STAT & IPC_SET */
+ u_short *array; /* array for GETALL & SETALL */
+};
+/* internal features declarations */
+static int dsp_protocol_flush(dsp_protocol_t * dsp_protocol);
+static int dsp_protocol_send_command(dsp_protocol_t * dsp_protocol,
+ const short int command);
+static void dsp_protocol_linear2Q15(const short int input,
+ short int *scale, short int *power2);
+static void dsp_protocol_Q152linear(const short int scale,
+ const short int power2, short int *output);
+static int dsp_protocol_update_state(dsp_protocol_t * dsp_protocol);
+static inline int dsp_protocol_get_sem(dsp_protocol_t * dsp_protocol);
+static inline int dsp_protocol_lock_dev(dsp_protocol_t * dsp_protocol);
+static inline int dsp_protocol_unlock_dev(dsp_protocol_t * dsp_protocol);
+/* Initialisation phase features definitions */
+/**
+ * @param dsp_protocol DSP protocol reference pointer to be instanciated.
+ *
+ * Creates new dsp_protocol object instance and initializes it
+ * with default parameters. After this the device must be
+ * separately opened with gst_dspaudio_open_node() method.
+ *
+ * @return zero if success, otherwise a negative error code
+ * (-ENOMEM - fail when requesting memory for data structures).
+ */
+int dsp_protocol_create(dsp_protocol_t ** dsp_protocol)
+{
+ int ret = 0;
+ pthread_mutexattr_t mattr;
+ DENTER();
+ *dsp_protocol = (dsp_protocol_t *) calloc(1, sizeof(dsp_protocol_t));
+ if ((*dsp_protocol) == NULL) {
+ DERROR("Could not allocate dsp_protocol instance\n");
+ ret = -ENOMEM;
+ goto out;
+ }
+ (*dsp_protocol)->fd = -1;
+ (*dsp_protocol)->device = NULL;
+ (*dsp_protocol)->state = STATE_UNINITIALISED;
+ (*dsp_protocol)->mute = 0;
+ (*dsp_protocol)->stream_id = 0;
+ (*dsp_protocol)->bridge_buffer_size = 0;
+ (*dsp_protocol)->mmap_buffer_size = 0;
+ (*dsp_protocol)->mmap_buffer = NULL;
+ pthread_mutexattr_init(&mattr);
+ pthread_mutexattr_settype(PTHREAD_MUTEX_ERRORCHECK_NP);
+ pthread_mutex_init(&((*dsp_protocol)->mutex), &mattr);
+ (*dsp_protocol)->sem_set_id = -1;
+#ifdef USE_RESOURCE_MANAGER
+ (*dsp_protocol)->dbus_connection = dbus_bus_get(DBUS_BUS_SYSTEM, NULL);
+#endif
+ out:
+ DLEAVE(ret);
+ return ret;
+}
+
+/**
+ * @param dsp_protocol DSP protocol reference pointer to be initialized.
+ * @param device dsp device node name.
+ *
+ * Opens pcm dsp device file and initializes dsp_protocol
+ * with information about stream, state and mmapbuffer.
+ *
+ * @return zero if success, otherwise a negative error code.
+ */
+int dsp_protocol_open_node(dsp_protocol_t * dsp_protocol, const char *device)
+{
+ int ret;
+ short int tmp;
+ audio_status_info_t audio_status_info;
+ audio_init_status_t audio_init_status;
+ DENTER();
+ if (dsp_protocol->state != STATE_UNINITIALISED) {
+ report_dsp_protocol
+ ("Trying to send open node from a non-valid state",
+ dsp_protocol);
+ ret = -EIO;
+ goto out;
+ }
+
+ dsp_protocol->fd = open(device, O_RDWR);
+ if (dsp_protocol->fd < 0) {
+ DERROR("Could not open pcm device file %s\n", device);
+ ret = errno;
+ goto out;
+ }
+ dsp_protocol->device = strdup(device);
+ dsp_protocol_get_sem(dsp_protocol);
+ if ((ret = dsp_protocol_lock_dev(dsp_protocol)) < 0)
+ goto out;
+ if ((ret = dsp_protocol_flush(dsp_protocol)) < 0)
+ goto unlock;
+ tmp = DSP_CMD_STATE;
+ if (write(dsp_protocol->fd, &tmp, sizeof(short int)) < 0) {
+ ret = -EIO;
+ goto unlock;
+ }
+ if ((ret = read(dsp_protocol->fd, &audio_status_info,
+ sizeof(audio_status_info_t))) < 0) {
+ report_dsp_protocol("Could not read audio_status_info",
+ dsp_protocol);
+ goto unlock;
+ }
+ report_audio_status_info("Received:", audio_status_info);
+ if (audio_status_info.status == STATE_UNINITIALISED) {
+ tmp = DSP_CMD_INIT;
+ if (write(dsp_protocol->fd, &tmp, sizeof(short int)) < 0) {
+ ret = -EIO;
+ goto unlock;
+ }
+ if ((ret = read(dsp_protocol->fd, &audio_init_status,
+ sizeof(audio_init_status_t))) < 0) {
+ report_dsp_protocol("Error reading INIT status",
+ dsp_protocol);
+ goto unlock;
+ }
+ report_audio_init_status("Received:", audio_init_status);
+ /* receive info from audio_init_status */
+ dsp_protocol->stream_id = audio_init_status.stream_id;
+ dsp_protocol->bridge_buffer_size =
+ audio_init_status.bridge_buffer_size;
+ dsp_protocol->mmap_buffer_size =
+ audio_init_status.mmap_buffer_size;
+ } else {
+ /* This pcm task node is busy. Try to use another one. */
+ ret = -EBUSY;
+ goto unlock;
+ }
+ dsp_protocol->mmap_buffer = (short int *)
+ mmap((void *)0, dsp_protocol->mmap_buffer_size,
+ PROT_READ | PROT_WRITE, MAP_SHARED, dsp_protocol->fd, 0);
+
+ if (dsp_protocol->mmap_buffer == NULL) {
+ report_dsp_protocol("Cannot mmap data buffer", dsp_protocol);
+ ret = -ENOMEM;
+ goto unlock;
+ }
+ dsp_protocol->state = STATE_INITIALISED;
+ report_dsp_protocol("connection stablished:", dsp_protocol);
+
+ ret = 0;
+ unlock:
+ dsp_protocol_unlock_dev(dsp_protocol);
+ out:
+ DLEAVE(ret);
+ return ret;
+}
+
+/**
+ * @param dsp_protocol DSP protocol reference pointer.
+ * @param audio_params_data audio params to be sent to the dsp.
+ *
+ * Send audio params to pcm task node and checks if
+ * it was sent properly.
+ *
+ * @return zero if success, otherwise a negative error code.
+ */
+int dsp_protocol_send_audio_params(dsp_protocol_t * dsp_protocol,
+ audio_params_data_t * audio_params_data)
+{
+ int ret;
+ dsp_cmd_status_t audio_cmd_status;
+ DENTER();
+ if (dsp_protocol->state != STATE_INITIALISED) {
+ report_dsp_protocol
+ ("Trying to send audio parameters from a non-valid state",
+ dsp_protocol);
+ ret = -EIO;
+ goto out;
+ }
+ if ((ret = dsp_protocol_lock_dev(dsp_protocol)) < 0)
+ goto out;
+ audio_params_data->ds_stream_id = dsp_protocol->stream_id;
+ if (write(dsp_protocol->fd, audio_params_data,
+ sizeof(audio_params_data_t)) < 0) {
+ ret = -1;
+ report_dsp_protocol("Could not send audio_params_data",
+ dsp_protocol);
+ goto unlock;
+ }
+ if (read(dsp_protocol->fd, &audio_cmd_status,
+ sizeof(dsp_cmd_status_t)) < 0) {
+ ret = -1;
+ report_dsp_protocol("Could not receive DSP_CMD_STATUS",
+ dsp_protocol);
+ goto unlock;
+ }
+ if (audio_cmd_status.status != DSP_OK) {
+ ret = -1;
+ report_dsp_protocol("DSP returned a diferent Status of DSP_OK",
+ dsp_protocol);
+ report_return_value("DSP returned", audio_cmd_status.status);
+ report_audio_params("Audio params sent", (*audio_params_data));
+ goto unlock;
+ }
+ report_audio_params("Audio params sent", (*audio_params_data));
+ ret = 0;
+ unlock:
+ dsp_protocol_unlock_dev(dsp_protocol);
+ out:
+ DLEAVE(ret);
+ return ret;
+}
+
+/**
+ * @param dsp_protocol DSP protocol reference pointer.
+ * @param speech_params_data audio params to be sent to the dsp.
+ *
+ * Send audio params to pcm_rec task node and checks if
+ * it was sent properly.
+ *
+ * @return zero if success, otherwise a negative error code.
+ */
+int dsp_protocol_send_speech_params(dsp_protocol_t * dsp_protocol,
+ speech_params_data_t * speech_params_data)
+{
+ int ret;
+ dsp_cmd_status_t audio_cmd_status;
+ DENTER();
+ if (dsp_protocol->state != STATE_INITIALISED) {
+ report_dsp_protocol
+ ("Trying to send speech parameters from a non-valid state",
+ dsp_protocol);
+ ret = -EIO;
+ goto out;
+ }
+ if ((ret = dsp_protocol_lock_dev(dsp_protocol)) < 0)
+ goto out;
+ speech_params_data->ds_stream_id = dsp_protocol->stream_id;
+ if (write(dsp_protocol->fd, speech_params_data,
+ sizeof(speech_params_data_t)) < 0) {
+ ret = -1;
+ report_dsp_protocol("Could not send speech_params_data",
+ dsp_protocol);
+ goto unlock;
+ }
+ if (read(dsp_protocol->fd, &audio_cmd_status,
+ sizeof(dsp_cmd_status_t)) < 0) {
+ ret = -1;
+ report_dsp_protocol("Could not receive DSP_CMD_STATUS",
+ dsp_protocol);
+ goto unlock;
+ }
+ if (audio_cmd_status.status != DSP_OK) {
+ ret = -1;
+ report_dsp_protocol("DSP returned a diferent Status of DSP_OK",
+ dsp_protocol);
+ report_return_value("DSP returned", audio_cmd_status.status);
+ report_speech_params("Speech params sent",
+ (*speech_params_data));
+ goto unlock;
+ }
+ report_speech_params("Speech params sent", (*speech_params_data));
+ ret = 0;
+ unlock:
+ dsp_protocol_unlock_dev(dsp_protocol);
+ out:
+ DLEAVE(ret);
+ return ret;
+}
+
+/* Execution phase features definitions */
+/**
+ * @param dsp_protocol dsp_protocol_t structure.
+ *
+ * It starts a playback section sending a DSP_CMD_PLAY. It flushes
+ * all pending message comming from DSP side after DSP_CMD_PLAY.
+ *
+ * @return zero if success, otherwise a negative error code
+ * (-EIO - sending play from a non-valid state).
+ */
+int dsp_protocol_send_play(dsp_protocol_t * dsp_protocol)
+{
+ int ret;
+
+ DENTER();
+ if (dsp_protocol->state == STATE_UNINITIALISED) {
+ report_dsp_protocol
+ ("Trying to send play from a non-valid state",
+ dsp_protocol);
+ ret = -EIO;
+ goto out;
+ }
+ if ((ret = dsp_protocol_lock_dev(dsp_protocol)) < 0)
+ goto out;
+ if (dsp_protocol->state == STATE_PLAYING)
+ ret = 0;
+ else {
+ if ((ret =
+ dsp_protocol_send_command(dsp_protocol,
+ DSP_CMD_PLAY)) == 0)
+ dsp_protocol->state = STATE_PLAYING;
+ dsp_protocol_flush(dsp_protocol);
+ //Both, read and write remain data on the mbx system
+ }
+ dsp_protocol_unlock_dev(dsp_protocol);
+ out:
+ DLEAVE(ret);
+ return ret;
+}
+
+/**
+ * @param dsp_protocol dsp_protocol_t structure.
+ * @param data audio data buffer.
+ * @param count amount of data to be copied (in TUint16).
+ *
+ * It copies audio data to the mmap area in the right moment.
+ *
+ * @return if success, it returns the amount of data was sent.
+ * If called in a wrong moment, it returns 0. Otherwise, a negative error code.
+ */
+int dsp_protocol_send_audio_data(dsp_protocol_t * dsp_protocol,
+ void *data,
+ unsigned short int count /* TUint16 */ )
+{
+ write_status_t write_status;
+ data_write_t data_write;
+ int ret = 0;
+ DENTER();
+ DPRINT("count %d\n", count);
+ if (dsp_protocol->state != STATE_PLAYING) {
+ report_dsp_protocol("Not in the STATE_PLAYING\n", dsp_protocol);
+ goto out;
+ }
+ if ((ret = dsp_protocol_lock_dev(dsp_protocol)) < 0)
+ goto out;
+
+ memcpy(dsp_protocol->mmap_buffer, data, count * 2);
+ data_write.dsp_cmd = DSP_CMD_DATA_WRITE;
+ data_write.data_size = count;
+ if ((ret = write(dsp_protocol->fd, &data_write,
+ sizeof(data_write_t))) < 0)
+ goto unlock;
+
+ if ((ret = read(dsp_protocol->fd, &write_status,
+ sizeof(write_status_t))) < 0)
+ goto unlock;
+ if (write_status.dsp_cmd == DSP_CMD_DATA_WRITE) {
+
+ if (write_status.status == DSP_OK) {
+ ret = count;
+ DPRINT("%d words sent\n", ret);
+ } else {
+ DPRINT("Received a response different of DSP_OK\n");
+ report_return_value("Returned value:",
+ write_status.status);
+ report_dsp_protocol("Current dsp_protocol",
+ dsp_protocol);
+ ret = 0;
+ }
+ } else {
+ report_dsp_protocol("Could not send audio data", dsp_protocol);
+ report_command("Returned cmd", write_status.dsp_cmd);
+ ret = 0;
+ }
+
+ unlock:
+ dsp_protocol_unlock_dev(dsp_protocol);
+ out:
+ DLEAVE(ret);
+ return ret;
+
+}
+
+/**
+ * @param dsp_protocol dsp_protocol_t structure.
+ * @param data audio data buffer.
+ * @param count amount of data to be copied (in TUint16).
+ *
+ * It copies the audio data from the mmap area in the right moment.
+ *
+ * @return if success, it returns the amount of data was received.
+ * If called in a wrong moment, it returns 0. Otherwise, a negative error code.
+ */
+int dsp_protocol_receive_audio_data(dsp_protocol_t * dsp_protocol,
+ void *data, int count /* TU16int */ )
+{
+ read_status_t read_status;
+ dsp_cmd_status_t audio_cmd_status;
+
+ int ret = 0;
+ DENTER();
+ DPRINT("count %d\n", count);
+ if (dsp_protocol->state != STATE_PLAYING) {
+ report_dsp_protocol("Not in the STATE_PLAYING\n", dsp_protocol);
+ goto out;
+ }
+ if ((ret = dsp_protocol_lock_dev(dsp_protocol)) < 0)
+ goto out;
+ memcpy(data, dsp_protocol->mmap_buffer, count * 2);
+ audio_cmd_status.dsp_cmd = DSP_CMD_DATA_READ;
+ audio_cmd_status.status = DSP_OK;
+ if ((ret = write(dsp_protocol->fd, &audio_cmd_status,
+ sizeof(dsp_cmd_status_t))) < 0)
+ goto unlock;
+ if ((ret = read(dsp_protocol->fd, &read_status,
+ sizeof(read_status_t))) < 0)
+ goto unlock;
+ if (read_status.dsp_cmd == DSP_CMD_DATA_READ) {
+ if (read_status.status == DSP_OK) {
+ DPRINT("---------> DSP: ### %d ###\n",
+ read_status.frame_size);
+ ret = count;
+ DPRINT("%d words sent\n", ret);
+ } else {
+ report_dsp_protocol("Receive a status "
+ "different from DSP_OK (skiping block)",
+ dsp_protocol);
+ report_return_value("Returned: ", read_status.status);
+ ret = 0;
+ }
+
+ } else {
+ report_dsp_protocol("Could not receive audio data",
+ dsp_protocol);
+ DPRINT("Returned cmd %d expected %d\n", read_status.dsp_cmd,
+ DSP_CMD_DATA_READ);
+ report_return_value("Returned: ", read_status.status);
+ ret = 0;
+ }
+ unlock:
+ dsp_protocol_unlock_dev(dsp_protocol);
+ out:
+ DLEAVE(ret);
+ return ret;
+}
+
+/**
+ * @param dsp_protocol dsp_protocol_t structure.
+ *
+ * It pauses a playback section sending a DSP_CMD_PAUSE.
+ *
+ * @return zero if success, otherwise a negative error code
+ * (-EIO - sending play from a non-valid state).
+ */
+int dsp_protocol_send_pause(dsp_protocol_t * dsp_protocol)
+{
+ int ret;
+ DENTER();
+ if (dsp_protocol->state != STATE_PLAYING) {
+ report_dsp_protocol("Not in the STATE_PLAYING\n", dsp_protocol);
+ ret = -EIO;
+ goto out;
+ }
+ if ((ret = dsp_protocol_lock_dev(dsp_protocol)) < 0)
+ goto out;
+ if (dsp_protocol->state == STATE_PAUSED)
+ ret = 0;
+ else {
+ if ((ret =
+ dsp_protocol_send_command(dsp_protocol,
+ DSP_CMD_PAUSE)) == 0)
+ dsp_protocol->state = STATE_PAUSED;
+ }
+ dsp_protocol_unlock_dev(dsp_protocol);
+ out:
+ DLEAVE(ret);
+ return ret;
+}
+
+/**
+ * @param dsp_protocol dsp_protocol_t structure.
+ *
+ * It stops a playback section sending a DSP_CMD_STOP.
+ *
+ * @return zero if success, otherwise a negative error code
+ * (-EIO - sending play from a non-valid state).
+ */
+int dsp_protocol_send_stop(dsp_protocol_t * dsp_protocol)
+{
+ int ret;
+ DENTER();
+ if (dsp_protocol->state != STATE_PLAYING) {
+ report_dsp_protocol("Not in the STATE_PLAYING\n", dsp_protocol);
+ ret = -EIO;
+ goto out;
+ }
+ if ((ret = dsp_protocol_lock_dev(dsp_protocol)) < 0)
+ goto out;
+ if (dsp_protocol->state == STATE_STOPPED)
+ ret = 0;
+ else {
+ if ((ret =
+ dsp_protocol_send_command(dsp_protocol,
+ DSP_CMD_STOP)) == 0)
+ dsp_protocol->state = STATE_STOPPED;
+ }
+ dsp_protocol_unlock_dev(dsp_protocol);
+ out:
+ DLEAVE(ret);
+ return ret;
+}
+
+/* Deletion phase features definitions */
+/**
+ * @param dsp_protocol DSP protocol reference pointer to be uninitialized.
+ *
+ * It closes the connection with pcm dsp task node. It flushes all
+ * pending data before that. Closes the mmap area. Initialize the
+ * dsp_protocol structure with unused values.
+ *
+ * @return zero if success, otherwise a negative error code.
+ */
+int dsp_protocol_close_node(dsp_protocol_t * dsp_protocol)
+{
+ int ret;
+ DENTER();
+ if (dsp_protocol->state != STATE_UNINITIALISED) {
+ if ((ret = dsp_protocol_lock_dev(dsp_protocol)) < 0)
+ goto out;
+ if ((ret = dsp_protocol_flush(dsp_protocol)) < 0)
+ goto unlock;
+ if ((ret = dsp_protocol_send_command(dsp_protocol,
+ DSP_CMD_CLOSE)) < 0)
+ goto unlock;
+ }
+
+ if (dsp_protocol->mmap_buffer)
+ munmap(dsp_protocol->mmap_buffer,
+ dsp_protocol->mmap_buffer_size);
+ close(dsp_protocol->fd);
+ dsp_protocol->fd = -1;
+ free(dsp_protocol->device);
+ dsp_protocol->device = NULL;
+ dsp_protocol->state = STATE_UNINITIALISED;
+ dsp_protocol->mute = 0;
+ dsp_protocol->stream_id = 0;
+ dsp_protocol->bridge_buffer_size = 0;
+ dsp_protocol->mmap_buffer_size = 0;
+ dsp_protocol->mmap_buffer = NULL;
+ ret = 0;
+ unlock:
+ dsp_protocol_unlock_dev(dsp_protocol);
+ out:
+ DLEAVE(ret);
+ return ret;
+}
+
+/**
+ * @param dsp_protocol DSP protocol reference pointer.
+ *
+ * It frees all the allocated memory. It sets NULL to the pointer.
+ *
+ * @return zero if success, otherwise a negative error code.
+ */
+int dsp_protocol_destroy(dsp_protocol_t ** dsp_protocol)
+{
+ int ret = 0;
+ DENTER();
+#ifdef USE_RESOURCE_MANAGER
+ if ((*dsp_protocol)->dbus_connection)
+ dbus_connection_close((*dsp_protocol)->dbus_connection);
+#endif /* USE_RESOURCE_MANAGER */
+ if (*dsp_protocol) {
+ if ((*dsp_protocol)->device)
+ free((*dsp_protocol)->device);
+ free((*dsp_protocol));
+ *dsp_protocol = NULL;
+ }
+ DLEAVE(ret);
+ return ret;
+}
+
+/* controls features definitions */
+/**
+ * dsp_protocol_set_volume:
+ *
+ * @param dsp_protocol dsp_protocol_t structure.
+ * @param left left channel volume value (0 - 100).
+ * @param right right channel volume value (0 - 100).
+ *
+ * It changes volume data for both left and right channels.
+ * It receives both values in a 0 - 100 scale.
+ *
+ * @return zero if success, otherwise a negative error code.
+ */
+int dsp_protocol_set_volume(dsp_protocol_t * dsp_protocol,
+ unsigned char left, unsigned char right)
+{
+ int ret;
+ dsp_cmd_status_t audio_cmd_status;
+ volume_data_t volume_data;
+ panning_data_t panning_data;
+
+ DENTER();
+ if ((ret = dsp_protocol_lock_dev(dsp_protocol)) < 0)
+ goto out;
+ dsp_protocol_linear2Q15(left > right ? left : right, &volume_data.scale,
+ &volume_data.power2);
+ volume_data.dsp_cmd = DSP_CMD_SET_VOLUME;
+ if ((ret =
+ write(dsp_protocol->fd, &volume_data, sizeof(volume_data_t))) < 0)
+ goto unlock;
+ if (read(dsp_protocol->fd, &audio_cmd_status,
+ sizeof(dsp_cmd_status_t)) < 0) {
+ ret = -EINVAL;
+ report_dsp_protocol("Could not receive DSP_CMD_STATUS",
+ dsp_protocol);
+ goto unlock;
+ }
+ report_return_value("Received", audio_cmd_status.status);
+ ret = 0;
+ if (audio_cmd_status.status != DSP_OK)
+ ret = -EIO;
+ if (ret == 0) { /*if sucess till here, update panning info */
+ panning_data.dsp_cmd = DSP_CMD_SET_PANNING;
+ panning_data.steps = PANNING_STEP;
+ if (left != right) {
+ panning_data.left_gain =
+ left >
+ right ? 0x4000 : (1.0 * left) / right * 0x4000;
+ panning_data.right_gain =
+ right >
+ left ? 0x4000 : (1.0 * right) / left * 0x4000;
+ } else {
+ panning_data.left_gain = 0x4000;
+ panning_data.right_gain = 0x4000;
+ }
+ DPRINT("left gain %x right gain %x\n", panning_data.left_gain,
+ panning_data.right_gain);
+ if ((ret =
+ write(dsp_protocol->fd, &panning_data,
+ sizeof(panning_data_t))) < 0)
+ goto unlock;
+ if (read(dsp_protocol->fd, &audio_cmd_status,
+ sizeof(dsp_cmd_status_t)) < 0) {
+ ret = -EINVAL;
+ report_dsp_protocol("Could not receive DSP_CMD_STATUS",
+ dsp_protocol);
+ goto unlock;
+ }
+ ret = 0;
+ if (audio_cmd_status.status != DSP_OK)
+ ret = -EIO;
+
+ }
+ unlock:
+ dsp_protocol_unlock_dev(dsp_protocol);
+ out:
+ DLEAVE(ret);
+ return ret;
+}
+
+/**
+ * @param dsp_protocol dsp_protocol_t structure.
+ * @param left left channel volume value output (0 - 100).
+ * @param right right channel volume value output (0 - 100).
+ *
+ * It returns volume data for both left and right channels.
+ * It provides both values in a 0 - 100 scale.
+ *
+ * @return zero if success, otherwise a negative error code.
+ */
+int dsp_protocol_get_volume(dsp_protocol_t * dsp_protocol,
+ unsigned char *left, unsigned char *right)
+{
+ short int tmp;
+ int ret;
+ audio_status_info_t audio_status_info;
+ DENTER();
+ tmp = DSP_CMD_STATE;
+ if ((ret = dsp_protocol_lock_dev(dsp_protocol)) < 0)
+ goto out;
+
+ if (write(dsp_protocol->fd, &tmp, sizeof(short int)) < 0) {
+ ret = -EIO;
+ goto unlock;
+ }
+ if ((ret = read(dsp_protocol->fd, &audio_status_info,
+ sizeof(audio_status_info_t))) < 0) {
+ report_dsp_protocol("Could not read audio_status_info",
+ dsp_protocol);
+ goto unlock;
+ }
+ dsp_protocol->state = audio_status_info.status;
+ report_audio_status_info("Received:", audio_status_info);
+ dsp_protocol_Q152linear(audio_status_info.vol_scale,
+ audio_status_info.vol_power2, &tmp);
+ *left = tmp;
+ *right = tmp;
+ if (audio_status_info.number_channels == CHANNELS_2) {
+ if (audio_status_info.left_gain > audio_status_info.right_gain){
+ float result =
+ *right * audio_status_info.right_gain / (0x4000 *
+ 1.0);
+ *right = result;
+ if ((result - *right) > 0.5)
+ (*right)++;
+ }
+ if (audio_status_info.left_gain < audio_status_info.right_gain){
+ float result =
+ *left * audio_status_info.left_gain / (0x4000 *
+ 1.0);
+ *left = result;
+ if ((result - *left) > 0.5)
+ (*left)++;
+ }
+ }
+ ret = 0;
+ unlock:
+ dsp_protocol_unlock_dev(dsp_protocol);
+ out:
+ DLEAVE(ret);
+ return ret;
+}
+
+/**
+ * @param dsp_protocol dsp_protocol_t structure.
+ * @param mute mute value (0 unmuted - 1 muted).
+ *
+ * It changes mute state of DSP task node sending DSP_CMD_[UN]MUTE.
+ * Provide 0 in mute to unmute, and 1 in mute to mute.
+ *
+ * @return zero if success, otherwise a negative error code.
+ */
+int dsp_protocol_set_mute(dsp_protocol_t * dsp_protocol, unsigned char mute)
+{
+ int ret = 0;
+ int command;
+ DENTER();
+ if ((ret = dsp_protocol_lock_dev(dsp_protocol)) < 0)
+ goto out;
+ if (mute == 1)
+ command = DSP_CMD_MUTE;
+ else
+ command = DSP_CMD_UNMUTE;
+ ret = dsp_protocol_send_command(dsp_protocol, command);
+ dsp_protocol->mute = mute;
+ dsp_protocol_unlock_dev(dsp_protocol);
+ out:
+ DLEAVE(ret);
+ return ret;
+}
+
+/**
+ * @param dsp_protocol dsp_protocol_t structure.
+ *
+ * It returns mute state of DSP task node.
+ *
+ * @return zero if success, it returns current state of mute.
+ * 0 means not muted. 1 means muted. otherwise a negative error code.
+ */
+int dsp_protocol_get_mute(dsp_protocol_t * dsp_protocol)
+{
+ int ret = 0;
+ DENTER();
+ if ((ret = dsp_protocol_lock_dev(dsp_protocol)) < 0)
+ goto out;
+ ret = dsp_protocol_update_state(dsp_protocol);
+ if (ret >= 0)
+ ret = dsp_protocol->mute;
+ dsp_protocol_unlock_dev(dsp_protocol);
+ out:
+ DLEAVE(ret);
+ return ret;
+}
+
+/*miscelaneos features definitions */
+/**
+ * @param dsp_protocol dsp_protocol_t structure.
+ * @param enable enabled state of mic. 0 disable. 1 enabled.
+ *
+ * It modifies enabled state of mic.
+ *
+ * @return zero if success, otherwise a negative error code.
+ */
+#ifdef USE_RESOURCE_MANAGER
+int dsp_protocol_set_mic_enabled(dsp_protocol_t * dsp_protocol, int enabled)
+{
+ int ret = 0;
+ DBusMessage *message;
+ DBusMessage *reply = NULL;
+ DENTER();
+ if (dsp_protocol->dbus_connection &&
+ (message = dbus_message_new_method_call(AUDIO_PM_SERVICE,
+ AUDIO_PM_RECORD_RESOURCE, RESOURCE_INTERFACE,
+ enabled ? "request" : "release"))) {
+ if (!enabled) {
+ dbus_int32_t handle = 0;
+ /* assuming handle is always 0 for this resource */
+ dbus_message_append_args(message,
+ DBUS_TYPE_INT32, &handle,
+ DBUS_TYPE_INVALID);
+ }
+ reply = dbus_connection_send_with_reply_and_block(
+ dsp_protocol->dbus_connection,
+ message, RESOURCE_TIMEOUT, NULL);
+ /* TODO: check return value(s), append args for request()
+ * These parts of the RM spec may still change so not done yet
+ */
+ dbus_message_unref(message);
+ }
+ if (reply) {
+ dbus_message_unref(reply);
+ } else {
+ DPRINT("Error acquiring PM resource for recording\n");
+ #ifdef ERROR_ON_PM_FAILURE
+ ret = -EIO;
+ #endif
+ }
+ DLEAVE(ret);
+ return ret;
+}
+
+#else /* !USE_RESOURCE_MANAGER */
+int dsp_protocol_set_mic_enabled(dsp_protocol_t * dsp_protocol, int enabled)
+{
+ int mic_fd;
+ int ret;
+ char mic_control_name[] = "/sys/devices/platform/audio-i2c/mic_enable";
+ DENTER();
+ if ((mic_fd = open(mic_control_name, O_WRONLY)) < 0) {
+ DPRINT("Error opening: %s\n", mic_control_name);
+#ifdef ERROR_ON_PM_FAILURE
+ ret = -EIO;
+#else
+ ret = 0;
+#endif
+ goto out;
+ }
+
+ write(mic_fd, (enabled ? "1" : "0"), sizeof(char));
+ close(mic_fd);
+ ret = 0;
+ out:
+ DLEAVE(ret);
+ return ret;
+}
+#endif /* USE_RESOURCE_MANAGER */
+
+/**
+ * @param dsp_protocol dsp_protocol_t structure.
+ * @param device dsp task node file name.
+ *
+ * It opens a dsp task node and queries for its states.
+ *
+ * @return if success, it returns number of channels whose dsp task is
+ * currently using (1 - mono. 2 stero). otherwise a negative error code.
+ */
+int dsp_protocol_probe_node(dsp_protocol_t * dsp_protocol, const char *device)
+{
+ int ret;
+ DENTER();
+ if (dsp_protocol->state != STATE_UNINITIALISED) {
+ report_dsp_protocol
+ ("Trying to send open node from a non-valid state",
+ dsp_protocol);
+ ret = -EIO;
+ goto out;
+ }
+
+ dsp_protocol->fd = open(device, O_RDWR);
+ if (dsp_protocol->fd < 0) {
+ DERROR("Could not open pcm device file %s\n", device);
+ ret = errno;
+ goto out;
+ }
+ dsp_protocol->device = strdup(device);
+ dsp_protocol_get_sem(dsp_protocol);
+
+ if ((ret = dsp_protocol_lock_dev(dsp_protocol)) < 0)
+ goto out;
+ dsp_protocol->device = strdup(device);
+ ret = dsp_protocol_update_state(dsp_protocol);
+ if (ret != CHANNELS_1 && ret != CHANNELS_2)
+ ret = CHANNELS_1;
+ dsp_protocol_unlock_dev(dsp_protocol);
+ out:
+ DLEAVE(ret);
+ return ret;
+
+}
+
+/**
+ * @param str string with a number.
+ * @param val holder for the conversion result.
+ *
+ * It converts a string to a number (long).
+ *
+ * @return zero if success, otherwise a negative error code.
+ */
+int safe_strtol(const char *str, long *val)
+{
+ char *end;
+ long v;
+ int ret;
+ DENTER();
+ if (!*str) {
+ ret = -EINVAL;
+ goto out;
+ }
+ errno = 0;
+ v = strtol(str, &end, 0);
+ if (errno) {
+ ret = -errno;
+ goto out;
+ }
+ if (*end) {
+ ret = -EINVAL;
+ goto out;
+ }
+ *val = v;
+ ret = 0;
+ out:
+ DLEAVE(ret);
+ return ret;
+}
+/* internal features definitions */
+/**
+ * @param dsp_protocol dsp_protocol_t structure.
+ *
+ * Tries to read all the pending data.
+ *
+ * @return zero. success
+ */
+static int dsp_protocol_flush(dsp_protocol_t * dsp_protocol)
+{
+ struct pollfd pollf;
+ int ret = 0;
+ int tmp;
+ DENTER();
+ pollf.fd = dsp_protocol->fd;
+ pollf.events = POLLIN;
+ while (poll(&pollf, 1, 0) > 0) {
+ if (read(dsp_protocol->fd, &tmp, sizeof(short int)) == 0)
+ /* Test end of file */
+ break;
+#ifdef DEBUG
+ fprintf(DEBUG_OUTPUT, ".");
+#endif
+ }
+#ifdef DEBUG
+ fprintf(DEBUG_OUTPUT, "\n");
+#endif
+ DLEAVE(ret);
+ return ret;
+}
+
+/**
+ * @param dsp_protocol dsp_protocol_t structure.
+ * @param command command value to be sent to the pcm task node.
+ *
+ * Send the command to pcm task node and checks if
+ * it was sent properly.
+ *
+ * @return zero if success, otherwise a negative error code.
+ */
+static int dsp_protocol_send_command(dsp_protocol_t * dsp_protocol,
+ const short int command)
+{
+ dsp_cmd_status_t audio_cmd_status;
+ int ret = 0;
+ short int tmp;
+ DENTER();
+ report_command("Sending", command);
+ tmp = command;
+ if (write(dsp_protocol->fd, &tmp, sizeof(short int)) < 0) {
+ report_dsp_protocol("Could not send", dsp_protocol);
+ ret = -EIO;
+ }
+
+ if (read(dsp_protocol->fd, &audio_cmd_status,
+ sizeof(dsp_cmd_status_t)) < 0) {
+ ret = -1;
+ report_dsp_protocol("Could not receive DSP_CMD_STATUS",
+ dsp_protocol);
+ goto out;
+ }
+/* report_command("Received", audio_cmd_status.dsp_cmd);
+ report_return_value("Received", audio_cmd_status.status);*/
+ DPRINT("audio_cmd_status.dsp_cmd: 0x%x\n", audio_cmd_status.dsp_cmd);
+ DPRINT("audio_cmd_status.status: 0x%x\n", audio_cmd_status.status);
+ if (audio_cmd_status.status != DSP_OK)
+ ret = -EIO;
+ out:
+ DLEAVE(ret);
+ return ret;
+}
+
+/**
+ * @param input 0 - 100 value to be converted to Q15.
+ * @param scale scale value of Q15 format.
+ * @param power2 power of 2 value of Q15 format.
+ *
+ * Converts a 0 - 100 value to a Q15 format value.
+ *
+ */
+static void dsp_protocol_linear2Q15(const short int input,
+ short int *scale, short int *power2)
+{
+ unsigned long int val = MAGIC_NUMBER * input;
+ DENTER();
+ if (input == 0) {
+ *scale = 0;
+ *power2 = 0;
+ } else {
+ *power2 = 1;
+ while (val < 0x40000000) {
+ (*power2)--;
+ val <<= 1;
+ }
+ *scale = val >> 16;
+ }
+ DPRINT("Resulted scale %d and power2 %d from input %d\n", *scale,
+ *power2, input);
+ DLEAVE(0);
+}
+
+/**
+ * @param scale scale value of Q15 format.
+ * @param power2 power of 2 value of Q15 format.
+ * @param output 0 - 100 resulted value.
+ *
+ * Converts a Q15 format value to a 0 - 100 value.
+ *
+ */
+static void dsp_protocol_Q152linear(const short int scale,
+ const short int power2, short int *output)
+{
+ float result = scale * 1.0 / 0x8000 * pow(2.0, 1.0 * power2) * 100.0;
+ DENTER();
+ *output = (short int)(result);
+ if ((result - *output) > 0.5)
+ (*output)++;
+ DPRINT("Resulted linear: %d from scale %d and power2 %d\n", *output,
+ scale, power2);
+ DLEAVE(0);
+}
+
+/**
+ * @param dsp_protocol dsp_protocol_t structure.
+ *
+ * Update dsp_protocol_t structure info. Queries dsp task
+ * for a audio_status_info structure.
+ *
+ * @return if success, it returns number of channels whose dsp task is
+ * currently using. otherwise a negative error code.
+ */
+static int dsp_protocol_update_state(dsp_protocol_t * dsp_protocol)
+{
+ int ret;
+ short int tmp;
+ audio_status_info_t audio_status_info;
+ DENTER();
+
+ if ((ret = dsp_protocol_flush(dsp_protocol)) < 0)
+ goto out;
+ tmp = DSP_CMD_STATE;
+ if (write(dsp_protocol->fd, &tmp, sizeof(short int)) < 0) {
+ ret = -EIO;
+ goto out;
+ }
+ if ((ret = read(dsp_protocol->fd, &audio_status_info,
+ sizeof(audio_status_info_t))) < 0) {
+ report_dsp_protocol("Could not read audio_status_info",
+ dsp_protocol);
+ goto out;
+ }
+ report_audio_status_info("Received:", audio_status_info);
+ dsp_protocol->stream_id = audio_status_info.stream_id;
+ dsp_protocol->bridge_buffer_size = audio_status_info.bridge_buffer_size;
+ dsp_protocol->mmap_buffer_size = audio_status_info.mmap_buffer_size;
+ dsp_protocol->state = audio_status_info.status;
+#ifndef NORMAL_DSP_TASK
+ dsp_protocol->mute = audio_status_info.mute;
+#endif
+ report_dsp_protocol("connection stablished:", dsp_protocol);
+ ret = audio_status_info.number_channels;
+ out:
+ DLEAVE(ret);
+ return ret;
+}
+
+/**
+ * @param dsp_protocol dsp_protocol_t structure.
+ *
+ * It produces the semaphore ID and connects to it.
+ *
+ * @return zero if success, otherwise a negative error code.
+ */
+static inline int dsp_protocol_get_sem(dsp_protocol_t * dsp_protocol)
+{
+ union semun sem_val; /* semaphore value, for semctl(). */
+
+ int rc;
+ int ret;
+ /* identifier returned by ftok() */
+ key_t set_key;
+ DENTER();
+ /* generate a "unique" key for our set, using the */
+ /* directory "/dev/dsptask/xxxx". */
+ set_key = ftok(dsp_protocol->device, 0);
+ if (set_key == -1) {
+ DPRINT("ftok: %d\n", errno);
+ ret = -ENODEV;
+ goto out;
+ }
+ DPRINT("key %d\n", set_key);
+
+ /* now we can use 'set_key' to generate a set id, for example. */
+ dsp_protocol->sem_set_id = semget(set_key, 1, 0666);
+ if (dsp_protocol->sem_set_id == -1) {
+ DPRINT("semget %d\n", errno);
+ dsp_protocol->sem_set_id = semget(set_key, 1, IPC_CREAT | 0666);
+ if (dsp_protocol->sem_set_id == -1) {
+ DPRINT("semget: IPC_CREAT: %d\n", errno);
+ ret = -ENODEV;
+ goto out;
+ }
+ DPRINT("Initialising the semaphore\n");
+ sem_val.val = 1;
+ rc = semctl(dsp_protocol->sem_set_id, 0, SETVAL, sem_val);
+ if (rc == -1) {
+ DPRINT("semctl %d\n", errno);
+ ret = -ENODEV;
+ goto out;
+ }
+ }
+ ret = 0;
+ out:
+ DLEAVE(ret);
+ return ret;
+}
+
+/**
+ * @param dsp_protocol dsp_protocol_t structure.
+ *
+ * It waits until be able to hold the semaphore to access the dsp task node.
+ * If the current process already has the semaphore, returns success.
+ *
+ * @return zero if success, otherwise a negative error code.
+ */
+static inline int dsp_protocol_lock_dev(dsp_protocol_t * dsp_protocol)
+{
+ int ret;
+ struct sembuf sem_op;
+ DENTER();
+ ret = pthread_mutex_trylock(&(dsp_protocol->mutex));
+ if (ret != 0) {
+ DPRINT("No lock %d\n", ret);
+ if (errno == EBUSY)
+ ret = 0;
+ goto out;
+ }
+ sem_op.sem_num = 0;
+ sem_op.sem_op = -1;
+ sem_op.sem_flg = 0;
+ DPRINT("requesting semaphore (dev)\n");
+ if (semop(dsp_protocol->sem_set_id, &sem_op, 1) == -1) {
+ DPRINT("semop %d\n", errno);
+ pthread_mutex_unlock(&(dsp_protocol->mutex));
+ ret = -errno;
+ }
+ out:
+ DLEAVE(ret);
+ return ret;
+}
+
+/**
+ * @param dsp_protocol dsp_protocol_t structure.
+ *
+ * It releases the semaphore.
+ *
+ * @return zero if success, otherwise a negative error code.
+ */
+static inline int dsp_protocol_unlock_dev(dsp_protocol_t * dsp_protocol)
+{
+ struct sembuf sem_op;
+ DENTER();
+ sem_op.sem_num = 0;
+ sem_op.sem_op = 1;
+ sem_op.sem_flg = 0;
+ DPRINT("Releasing\n");
+ semop(dsp_protocol->sem_set_id, &sem_op, 1);
+
+ pthread_mutex_unlock(&(dsp_protocol->mutex));
+ DLEAVE(0);
+ return 0;
+}
+
+
diff -pruN a/maemo/dsp-protocol.h b/maemo/dsp-protocol.h
--- a/maemo/dsp-protocol.h 1969-12-31 20:00:00.000000000 -0400
+++ b/maemo/dsp-protocol.h 2006-11-01 11:52:33.000000000 -0400
@@ -0,0 +1,88 @@
+/**
+ * @file dsp-protocol.h - Definition of functions whose represents
+ * an interface to the DSP PCM Task node protocol.
+ * <p>
+ * Copyright (C) 2006 Nokia Corporation
+ * <p>
+ * Contact: Eduardo Bezerra Valentin <eduardo.valentin@xxxxxxxxxxx>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Library General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Library General Public License for more details.
+ *
+ * You should have received a copy of the GNU Library General Public
+ * License along with this library; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ * */
+#ifndef _DSP_PROTOCOL_H
+#define _DSP_PROTOCOL_H
+
+#define _GNU_SOURCE
+#include <features.h>
+#include <pthread.h>
+#include <semaphore.h>
+#include "types.h"
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+
+typedef struct {
+ int fd;
+ char *device;
+ int state;
+ int mute;
+ unsigned int stream_id;
+ unsigned int bridge_buffer_size; /* in bytes */
+ unsigned int mmap_buffer_size; /* in bytes */
+ short int *mmap_buffer;
+ pthread_mutex_t mutex;
+ int sem_set_id;
+#ifdef USE_RESOURCE_MANAGER
+ void *dbus_connection;
+#endif
+} dsp_protocol_t;
+/* Initialisation phase */
+int dsp_protocol_create(dsp_protocol_t ** dsp_protocol);
+int dsp_protocol_open_node(dsp_protocol_t * dsp_protocol, const char *device);
+int dsp_protocol_send_audio_params(dsp_protocol_t * dsp_protocol,
+ audio_params_data_t * audio_params_data);
+int dsp_protocol_send_speech_params(dsp_protocol_t * dsp_protocol,
+ speech_params_data_t * audio_params_data);
+
+/* Execution phase */
+int dsp_protocol_send_play(dsp_protocol_t * dsp_protocol);
+int dsp_protocol_send_audio_data(dsp_protocol_t * dsp_protocol,
+ void *data, unsigned short int count);
+int dsp_protocol_receive_audio_data(dsp_protocol_t * dsp_protocol,
+ void *data, int count);
+
+int dsp_protocol_send_pause(dsp_protocol_t * dsp_protocol);
+int dsp_protocol_send_stop(dsp_protocol_t * dsp_protocol);
+
+/* Deletion phase */
+int dsp_protocol_close_node(dsp_protocol_t * dsp_protocol);
+int dsp_protocol_destroy(dsp_protocol_t ** dsp_protocol);
+
+/* controls */
+int dsp_protocol_set_volume(dsp_protocol_t * dsp_protocol,
+ unsigned char left, unsigned char right);
+int dsp_protocol_get_volume(dsp_protocol_t * dsp_protocol,
+ unsigned char *left, unsigned char *right);
+int dsp_protocol_set_mute(dsp_protocol_t * dsp_protocol, unsigned char mute);
+int dsp_protocol_get_mute(dsp_protocol_t * dsp_protocol);
+
+/*miscelaneos*/
+int dsp_protocol_set_mic_enabled(dsp_protocol_t * dsp_protocol, int enabled);
+int dsp_protocol_probe_node(dsp_protocol_t * dsp_protocol, const char *device);
+int safe_strtol(const char *str, long *val);
+
+#endif /* _DSP_PROTOCOL_H */
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/alsa-devel
