Hi.
> Excellent. By the way, do you need "disable_msi=1" in order for it to
> work correctly?
Without "disable_msi=1" things improved a little.
I now can hear both from the Line In jack and from the Mic jack if I set
"LINE1 pin mode" or "MIC1 pin mode" to "Headphones".
Still nothing from the S/PDIF or the speakers yet.
> Good work, I think we're starting to get somewhere. I would have expected
> the headphones to still work if the "LINE1 pin mode" was set to "Headphone"
> as well. Did it? In any case this result indicates that on your laptop the
> "Line out" jack is physically connected to the ALC260's LINE1 output.
It does now without "disable_msi=1".
>
> Now, what other physical jack sockets do you have on that laptop (besides
> "line out")? Do you also have problems with them or do they "just work"
> when you load snd_intel_hda without options?
On the laptop I have a Microphone, Line in and S/PDIF sockets.
If the module is loaded without options nothing works, you can only
hear a faint noise from the S/PDIF jack.
>
> > Attached to this e-mail are outputs of /proc/asound/card0/codec#0/1 and
> > aplay.
Sorry.
Codec: Realtek ALC260
Address: 0
Vendor Id: 0x10ec0260
Subsystem Id: 0x16311635
Revision Id: 0x100400
Default PCM: rates 0x560, bits 0x0e, types 0x1
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
Node 0x02 [Audio Output] wcaps 0x11: Stereo
PCM: rates 0x560, bits 0x0e, types 0x1
Node 0x03 [Audio Output] wcaps 0x211: Stereo Digital
PCM: rates 0x560, bits 0x1e, types 0x1
Node 0x04 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00
0x00] [0x00 0x00] [0x00 0x00]
PCM: rates 0x160, bits 0x06, types 0x1
Connection: 7
0x12* 0x13 0x14 0x15 0x16 0x0f 0x10
Node 0x05 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00
0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
PCM: rates 0x160, bits 0x06, types 0x1
Connection: 8
0x12* 0x13 0x14 0x15 0x16 0x07 0x0f 0x10
Node 0x06 [Audio Input] wcaps 0x100391: Stereo Digital
PCM: rates 0x160, bits 0x1e, types 0x1
Connection: 1
0x19
Node 0x07 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x23, nsteps=0x41, stepsize=0x03, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00
0x00] [0xa3 0xa3] [0xa3 0xa3] [0xa3 0xa3]
Connection: 8
0x12 0x13 0x14 0x15 0x16 0x17 0x0f 0x10
Node 0x08 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 2
0x02 0x07
Node 0x09 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 2
0x02 0x07
Node 0x0a [Audio Mixer] wcaps 0x20010e: Mono Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00] [0x00]
Amp-Out caps: ofs=0x23, nsteps=0x41, stepsize=0x03, mute=0
Amp-Out vals: [0x00]
Connection: 2
0x02 0x07
Node 0x0b [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x08* 0x09
Node 0x0c [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x08* 0x09
Node 0x0d [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x08* 0x09
Node 0x0e [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x08* 0x09
Node 0x0f [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x081003f: IN OUT HP EAPD Detect
Pin Default 0x01014110: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
Pin-ctls: 0x40: OUT
Connection: 1
0x08
Node 0x10 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x081003f: IN OUT HP EAPD Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Connection: 1
0x09
Node 0x11 [Pin Complex] wcaps 0x40010c: Mono Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80]
Pincap 0x0810: OUT
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x40: OUT
Connection: 1
0x0a
Node 0x12 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08133f: IN OUT HP Detect
Pin Default 0x01a19930: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
Pin-ctls: 0x24: IN
Connection: 1
0x0b
Node 0x13 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08133f: IN OUT HP Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Connection: 1
0x0c
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08133f: IN OUT HP Detect
Pin Default 0x01813131: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0x20: IN
Connection: 1
0x0d
Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08133f: IN OUT HP Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Connection: 1
0x0e
Node 0x16 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x99330132: [Fixed] CD at Int ATAPI
Conn = ATAPI, Color = Unknown
Pin-ctls: 0x00:
Node 0x17 [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x9983013e: [Fixed] Line In at Int ATAPI
Conn = ATAPI, Color = Unknown
Pin-ctls: 0x00:
Node 0x18 [Pin Complex] wcaps 0x400380: Mono Digital
Pincap 0x0814: OUT Detect
Pin Default 0x01454120: [Jack] SPDIF Out at Ext Rear
Conn = Optical, Color = Green
Pin-ctls: 0x00:
Connection: 1
0x03
Node 0x19 [Pin Complex] wcaps 0x400280: Mono Digital
Pincap 0x0824: IN Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x00:
Node 0x1a [Vendor Defined Widget] wcaps 0xf00040: Mono
Node 0x1b [Volume Knob Widget] wcaps 0x600080: Mono
[aplay -l]
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC260 Analog [ALC260 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
[aplay -L]
PCM list:
hw {
@args.0 CARD
@args.1 DEV
@args.2 SUBDEV
@args.CARD {
type string
default {
@func getenv
vars {
0 ALSA_PCM_CARD
1 ALSA_CARD
}
default {
@func refer
name 'defaults.pcm.card'
}
}
}
@args.DEV {
type integer
default {
@func igetenv
vars {
0 ALSA_PCM_DEVICE
}
default {
@func refer
name 'defaults.pcm.device'
}
}
}
@args.SUBDEV {
type integer
default {
@func refer
name 'defaults.pcm.subdevice'
}
}
type hw
card $CARD
device $DEV
subdevice $SUBDEV
}
plughw {
@args.0 CARD
@args.1 DEV
@args.2 SUBDEV
@args.CARD {
type string
default {
@func getenv
vars {
0 ALSA_PCM_CARD
1 ALSA_CARD
}
default {
@func refer
name 'defaults.pcm.card'
}
}
}
@args.DEV {
type integer
default {
@func igetenv
vars {
0 ALSA_PCM_DEVICE
}
default {
@func refer
name 'defaults.pcm.device'
}
}
}
@args.SUBDEV {
type integer
default {
@func refer
name 'defaults.pcm.subdevice'
}
}
type plug
slave.pcm {
type hw
card $CARD
device $DEV
subdevice $SUBDEV
}
}
plug {
@args.0 SLAVE
@args.SLAVE {
type string
}
type plug
slave.pcm $SLAVE
}
shm {
@args.0 SOCKET
@args.1 PCM
@args.SOCKET {
type string
}
@args.PCM {
type string
}
type shm
server $SOCKET
pcm $PCM
}
tee {
@args.0 SLAVE
@args.1 FILE
@args.2 FORMAT
@args.SLAVE {
type string
}
@args.FILE {
type string
}
@args.FORMAT {
type string
default raw
}
type file
slave.pcm $SLAVE
file $FILE
format $FORMAT
}
file {
@args.0 FILE
@args.1 FORMAT
@args.FILE {
type string
}
@args.FORMAT {
type string
default raw
}
type file
slave.pcm null
file $FILE
format $FORMAT
}
null {
type null
}
cards 'cards.pcm'
front 'cards.pcm.front'
rear 'cards.pcm.rear'
center_lfe 'cards.pcm.center_lfe'
side 'cards.pcm.side'
surround40 'cards.pcm.surround40'
surround41 'cards.pcm.surround41'
surround50 'cards.pcm.surround50'
surround51 'cards.pcm.surround51'
surround71 'cards.pcm.surround71'
iec958 'cards.pcm.iec958'
spdif 'cards.pcm.iec958'
modem 'cards.pcm.modem'
phoneline 'cards.pcm.phoneline'
default 'cards.pcm.default'
dmix 'cards.pcm.dmix'
dsnoop 'cards.pcm.dsnoop'
> I think we're getting there. For my reference could you please remind me of
> the make/model of the laptop we're dealing with?
It's a Packard Bell EasyNote V7900.
Thanks again.
Andrea
Attachment:
signature.asc
Description: This is a digitally signed message part
------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-devel
