The following issue has been CLOSED ====================================================================== <https://bugtrack.alsa-project.org/alsa-bug/view.php?id=997> ====================================================================== Reported By: HawkHunter Assigned To: ====================================================================== Project: ALSA - driver Issue ID: 997 Category: PCI - cmipci Reproducibility: always Severity: major Priority: normal Status: closed Distribution: Linux S0106002078b04ca8 2.6.9-5.0.3.ELsmp #1 SMP Sat Feb 19 19:38:02 CST 2005 i686 i686 i386 GNU/Linux Kernel Version: kernel-2.6.9-5.0.3.EL Resolution: unable to duplicate Fixed in Version: ====================================================================== Date Submitted: 03-17-2005 05:17 CET Last Modified: 07-28-2006 03:47 CEST ====================================================================== Summary: no sound at all Description: I cant get any sound - someone suggested that this would help you: [root@S0106002078b04ca8 ~]# lspci -vv 00:01.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc Radeon 7000 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns min), Cache Line Size 08 Interrupt: pin A routed to IRQ 3 Region 0: Memory at b8000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 4000 [size=256] Region 2: Memory at c6ef0000 (32-bit, non-prefetchable) [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:02.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10) Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min, 6000ns max) Interrupt: pin A routed to IRQ 4 Region 0: I/O ports at 4400 [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:03.0 Ethernet controller: Macronix, Inc. [MXIC] MX987x5 (rev 20) Subsystem: Unknown device 2078:0540 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping+ SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns min, 14000ns max), Cache Line Size 08 Interrupt: pin A routed to IRQ 15 Region 0: I/O ports at 4800 [size=256] Region 1: Memory at c6ee0000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Power Management version 1 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1+,D2-,D3hot-,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0c.0 System peripheral: Compaq Computer Corporation System Management Controller (rev 01) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: I/O ports at 4c00 [size=256] Region 1: Memory at c6ed0000 (32-bit, non-prefetchable) [size=256] 00:0e.0 VGA compatible controller: Cirrus Logic GD 5430/40 [Alpine] (rev 22) (prog-if 00 [VGA]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 0 Region 0: Memory at b7000000 (32-bit, prefetchable) [disabled] [size=16M] 00:0f.0 EISA bridge: Intel Corp. 82375EB/SB PCI to EISA Bridge (rev 15) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 00:14.0 RAM memory: Intel Corp. 450KX/GX [Orion] - 82453KX/GX Memory controller (rev 05) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:19.0 Host bridge: Intel Corp. 450KX/GX [Orion] - 82454KX/GX PCI bridge (rev 06) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ Latency: 32, Cache Line Size 08 00:1a.0 Host bridge: Intel Corp. 450KX/GX [Orion] - 82454KX/GX PCI bridge (rev 06) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 32, Cache Line Size 08 01:08.0 Class ff00: Compaq Computer Corporation PCI Hotplug Controller (rev 02) Subsystem: Compaq Computer Corporation: Unknown device a2f7 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 10 Region 0: Memory at c6ff0000 (32-bit, non-prefetchable) [size=256] 01:0a.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 03) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 255 (4250ns min, 16000ns max), Cache Line Size 08 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 5000 [size=256] Region 1: Memory at c6fe0000 (32-bit, non-prefetchable) [size=256] Region 2: Memory at c6fd0000 (32-bit, non-prefetchable) [size=4K] 01:0b.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 03) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 255 (4250ns min, 16000ns max), Cache Line Size 08 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 5400 [size=256] Region 1: Memory at c6fc0000 (32-bit, non-prefetchable) [size=256] Region 2: Memory at c6fb0000 (32-bit, non-prefetchable) [size=4K] [root@S0106002078b04ca8 ~]# Cheers, and thanks in advance for the help Trev ====================================================================== ---------------------------------------------------------------------- perex - 06-06-05 10:25 ---------------------------------------------------------------------- Could you be more specific? Do you have installed and configured the snd-cmipci driver? Issue History Date Modified Username Field Change ====================================================================== 03-17-05 05:17 HawkHunter New Issue 03-17-05 05:17 HawkHunter Distribution => Linux S0106002078b04ca8 2.6.9-5.0.3.ELsmp #1 SMP Sat Feb 19 19:38:02 CST 2005 i686 i686 i386 GNU/Linux 03-17-05 05:17 HawkHunter Kernel Version => kernel-2.6.9-5.0.3.EL 06-06-05 10:25 perex Note Added: 0004892 06-06-05 10:25 perex Assigned To perex => 06-06-05 10:25 perex Category 0_compilation problem_!!! => PCI - cmipci 07-28-06 03:47 Adrian Bunk Status assigned => closed 07-28-06 03:47 Adrian Bunk Resolution open => unable to duplicate ====================================================================== ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-devel
