A NOTE has been added to this issue. ====================================================================== <https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1389> ====================================================================== Reported By: wood Assigned To: ====================================================================== Project: ALSA - driver Issue ID: 1389 Category: PCI - ens1371 Reproducibility: always Severity: block Priority: normal Status: new Distribution: Modified Redhat 9.0 Kernel Version: 2.4.24 self compiled ====================================================================== Date Submitted: 09-01-2005 20:32 CEST Last Modified: 06-13-2006 05:06 CEST ====================================================================== Summary: snd-ens1371 / es1938 Creative Ectiva silent playout + new line-in capture failure Description: Soundcard: Creative Soundblaster PCI (Ectiva) Model:CT4730 Chip Label: Creative EV1938 Platform: Stable 2.4.24 Linux kernel on VIA MiniITX ME6000/M10000 w/ multiple soundcards. ALSA compiled from source works with VIA motherboard Audio and some other Creative PCI soundcards. Need a stable ALSA driver for this soundcard. Problem: The snd-ens1371 module loads correctly as 3rd sound device (First audio device is VIA 8235 from motherboard, 2nd is PCSP). Alsamixer -c 2 shows a reasonable set of controls. Playout either with OSS emulation (play) or ALSA player (aplay) plays WAV files but only silence for both 1.0.9 and 1.0.10rc1 releases. On ALSA 1.0.9 codebase,the Master Volume does not always show in alsamixer. In 1.0.10rc1 it does always show. ALSO: On ALSA 1.0.9 code, the Line-In capture works under both OSS Emulation and with ALSA arecord. On the latest development release ALSA 1.0.10rc1, the Line-In capture no longer works. So a new problem has been introduced from .9 to .10. Other info: Native OSS driver es1371 works fine with this card. But I want to switch to ALSA. Earlier model Creative PCI128, Model CT4750 loads snd-ens1371 and works fine with both tested ALSA releases using same platform configuration. Audigy 2 Value also works fine using snd-emu10k1 with same configuration (I included this card info to rule out basic config problems). ====================================================================== ---------------------------------------------------------------------- Raymond - 06-13-06 05:06 ---------------------------------------------------------------------- If you snd-ens1371 is configured as card 2 Please post the output of cat /proc/asound/card2/codec97#0/ac97#0-0 cat /proc/asound/card2/codec97#0/ac97#0-0+regs Issue History Date Modified Username Field Change ====================================================================== 09-01-05 20:32 wood New Issue 09-01-05 20:32 wood Distribution => Modified Redhat 9.0 09-01-05 20:32 wood Kernel Version => 2.4.24 self compiled 06-13-06 05:06 Raymond Note Added: 0010186 ====================================================================== _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-devel
