This patch adds the codec Apple uses in newer machines with digital
audio, the Onyx (pcm3052).
--- /dev/null
+++ b/sound/aoa/codecs/snd-aoa-codec-onyx.h
@@ -0,0 +1,76 @@
+/*
+ * Apple Onboard Audio driver for Onyx codec (header)
+ *
+ * Copyright 2006 Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
+ *
+ * GPL v2, can be found in COPYING.
+ */
+#ifndef __SND_AOA_CODEC_ONYX_H
+#define __SND_AOA_CODEC_ONYX_H
+#include <stddef.h>
+#include <linux/i2c.h>
+#include <linux/i2c-dev.h>
+#include <asm/pmac_low_i2c.h>
+#include <asm/prom.h>
+
+/* PCM3052 register definitions */
+
+/* the attenuation registers take values from
+ * -1 (0dB) to -127 (-63.0 dB) or others (muted) */
+#define ONYX_REG_DAC_ATTEN_LEFT 65
+#define FIRSTREGISTER ONYX_REG_DAC_ATTEN_LEFT
+#define ONYX_REG_DAC_ATTEN_RIGHT 66
+
+#define ONYX_REG_CONTROL 67
+# define ONYX_MRST (1<<7)
+# define ONYX_SRST (1<<6)
+# define ONYX_ADPSV (1<<5)
+# define ONYX_DAPSV (1<<4)
+# define ONYX_SILICONVERSION (1<<0)
+/* all others reserved */
+
+#define ONYX_REG_DAC_CONTROL 68
+# define ONYX_OVR1 (1<<6)
+# define ONYX_MUTE_RIGHT (1<<1)
+# define ONYX_MUTE_LEFT (1<<0)
+
+#define ONYX_REG_DAC_DEEMPH 69
+# define ONYX_DIGDEEMPH_SHIFT 5
+# define ONYX_DIGDEEMPH_MASK (3<<ONYX_DIGDEEMPH_SHIFT)
+# define ONYX_DIGDEEMPH_CTRL (1<<4)
+
+#define ONYX_REG_DAC_FILTER 70
+# define ONYX_ROLLOFF_FAST (1<<5)
+# define ONYX_DAC_FILTER_ALWAYS (1<<2)
+
+#define ONYX_REG_DAC_OUTPHASE 71
+# define ONYX_OUTPHASE_INVERTED (1<<0)
+
+#define ONYX_REG_ADC_CONTROL 72
+# define ONYX_ADC_INPUT_MIC (1<<5)
+/* 8 + input gain in dB, valid range for input gain is -4 .. 20 dB */
+# define ONYX_ADC_PGA_GAIN_MASK 0x1f
+
+#define ONYX_REG_ADC_HPF_BYPASS 75
+# define ONYX_HPF_DISABLE (1<<3)
+# define ONYX_ADC_HPF_ALWAYS (1<<2)
+
+#define ONYX_REG_DIG_INFO1 77
+# define ONYX_MASK_DIN_TO_BPZ (1<<7)
+/* bits 1-5 control channel bits 1-5 */
+# define ONYX_DIGOUT_DISABLE (1<<0)
+
+#define ONYX_REG_DIG_INFO2 78
+/* controls channel bits 8-15 */
+
+#define ONYX_REG_DIG_INFO3 79
+/* control channel bits 24-29, high 2 bits reserved */
+
+#define ONYX_REG_DIG_INFO4 80
+# define ONYX_VALIDL (1<<7)
+# define ONYX_VALIDR (1<<6)
+# define ONYX_SPDIF_ENABLE (1<<5)
+/* lower 4 bits control bits 32-35 of channel control and word length */
+# define ONYX_WORDLEN_MASK (0xF)
+
+#endif /* __SND_AOA_CODEC_ONYX_H */
--- /dev/null
+++ b/sound/aoa/codecs/snd-aoa-codec-onyx.c
@@ -0,0 +1,1113 @@
+/*
+ * Apple Onboard Audio driver for Onyx codec
+ *
+ * Copyright 2006 Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
+ *
+ * GPL v2, can be found in COPYING.
+ *
+ *
+ * This is a driver for the pcm3052 codec chip (codenamed Onyx)
+ * that is present in newer Apple hardware (with digital output).
+ *
+ * The Onyx codec has the following connections (listed by the bit
+ * to be used in aoa_codec.connected):
+ * 0: analog output
+ * 1: digital output
+ * 2: line input
+ * 3: microphone input
+ * Note that even though I know of no machine that has for example
+ * the digital output connected but not the analog, I have handled
+ * all the different cases in the code so that this driver may serve
+ * as a good example of what to do.
+ *
+ * NOTE: This driver assumes that there's at most one chip to be
+ * used with one alsa card, in form of creating all kinds
+ * of mixer elements without regard for their existence.
+ * But snd-aoa assumes that there's at most one card, so
+ * this means you can only have one onyx on a system. This
+ * should probably be fixed by changing the assumption of
+ * having just a single card on a system, and making the
+ * 'card' pointer accessible to anyone who needs it instead
+ * of hiding it in the aoa_snd_* functions...
+ *
+ */
+#include <linux/delay.h>
+#include <linux/module.h>
+MODULE_AUTHOR("Johannes Berg <johannes@xxxxxxxxxxxxxxxx>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("pcm3052 (onyx) codec driver for snd-aoa");
+
+#include "snd-aoa-codec-onyx.h"
+#include "../aoa.h"
+#include "../soundbus/soundbus.h"
+
+
+#define PFX "snd-aoa-codec-onyx: "
+
+struct onyx {
+ /* cache registers 65 to 80, they are write-only! */
+ u8 cache[16];
+ struct i2c_client i2c;
+ struct aoa_codec codec;
+ u32 initialised:1,
+ spdif_locked:1,
+ analog_locked:1,
+ original_mute:2;
+ int open_count;
+ struct codec_info *codec_info;
+
+ /* mutex serializes concurrent access to the device
+ * and this structure.
+ */
+ struct mutex mutex;
+};
+#define codec_to_onyx(c) container_of(c, struct onyx, codec)
+
+/* both return 0 if all ok, else on error */
+static int onyx_read_register(struct onyx *onyx, u8 reg, u8 *value)
+{
+ s32 v;
+
+ if (reg != ONYX_REG_CONTROL) {
+ *value = onyx->cache[reg-FIRSTREGISTER];
+ return 0;
+ }
+ v = i2c_smbus_read_byte_data(&onyx->i2c, reg);
+ if (v < 0)
+ return -1;
+ *value = (u8)v;
+ onyx->cache[ONYX_REG_CONTROL-FIRSTREGISTER] = *value;
+ return 0;
+}
+
+static int onyx_write_register(struct onyx *onyx, u8 reg, u8 value)
+{
+ int result;
+
+ result = i2c_smbus_write_byte_data(&onyx->i2c, reg, value);
+ if (!result)
+ onyx->cache[reg-FIRSTREGISTER] = value;
+ return result;
+}
+
+/* alsa stuff */
+
+static int onyx_dev_register(struct snd_device *dev)
+{
+ return 0;
+}
+
+static struct snd_device_ops ops = {
+ .dev_register = onyx_dev_register,
+};
+
+/* this is necessary because most alsa mixer programs
+ * can't properly handle the negative range */
+#define VOLUME_RANGE_SHIFT 128
+
+static int onyx_snd_vol_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 2;
+ uinfo->value.integer.min = -128 + VOLUME_RANGE_SHIFT;
+ uinfo->value.integer.max = -1 + VOLUME_RANGE_SHIFT;
+ return 0;
+}
+
+static int onyx_snd_vol_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct onyx *onyx = snd_kcontrol_chip(kcontrol);
+ s8 l, r;
+
+ mutex_lock(&onyx->mutex);
+ onyx_read_register(onyx, ONYX_REG_DAC_ATTEN_LEFT, &l);
+ onyx_read_register(onyx, ONYX_REG_DAC_ATTEN_RIGHT, &r);
+ mutex_unlock(&onyx->mutex);
+
+ ucontrol->value.integer.value[0] = l + VOLUME_RANGE_SHIFT;
+ ucontrol->value.integer.value[1] = r + VOLUME_RANGE_SHIFT;
+
+ return 0;
+}
+
+static int onyx_snd_vol_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct onyx *onyx = snd_kcontrol_chip(kcontrol);
+ s8 l, r;
+
+ mutex_lock(&onyx->mutex);
+ onyx_read_register(onyx, ONYX_REG_DAC_ATTEN_LEFT, &l);
+ onyx_read_register(onyx, ONYX_REG_DAC_ATTEN_RIGHT, &r);
+
+ if (l + VOLUME_RANGE_SHIFT == ucontrol->value.integer.value[0] &&
+ r + VOLUME_RANGE_SHIFT == ucontrol->value.integer.value[1]) {
+ mutex_unlock(&onyx->mutex);
+ return 0;
+ }
+
+ onyx_write_register(onyx, ONYX_REG_DAC_ATTEN_LEFT,
+ ucontrol->value.integer.value[0]
+ - VOLUME_RANGE_SHIFT);
+ onyx_write_register(onyx, ONYX_REG_DAC_ATTEN_RIGHT,
+ ucontrol->value.integer.value[1]
+ - VOLUME_RANGE_SHIFT);
+ mutex_unlock(&onyx->mutex);
+
+ return 1;
+}
+
+static struct snd_kcontrol_new volume_control = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Master Playback Volume",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .info = onyx_snd_vol_info,
+ .get = onyx_snd_vol_get,
+ .put = onyx_snd_vol_put,
+};
+
+/* like above, this is necessary because a lot
+ * of alsa mixer programs don't handle ranges
+ * that don't start at 0 properly.
+ * even alsamixer is one of them... */
+#define INPUTGAIN_RANGE_SHIFT (-3)
+
+static int onyx_snd_inputgain_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = 3 + INPUTGAIN_RANGE_SHIFT;
+ uinfo->value.integer.max = 28 + INPUTGAIN_RANGE_SHIFT;
+ return 0;
+}
+
+static int onyx_snd_inputgain_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct onyx *onyx = snd_kcontrol_chip(kcontrol);
+ u8 ig;
+
+ mutex_lock(&onyx->mutex);
+ onyx_read_register(onyx, ONYX_REG_ADC_CONTROL, &ig);
+ mutex_unlock(&onyx->mutex);
+
+ ucontrol->value.integer.value[0] =
+ (ig & ONYX_ADC_PGA_GAIN_MASK) + INPUTGAIN_RANGE_SHIFT;
+
+ return 0;
+}
+
+static int onyx_snd_inputgain_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct onyx *onyx = snd_kcontrol_chip(kcontrol);
+ u8 v, n;
+
+ mutex_lock(&onyx->mutex);
+ onyx_read_register(onyx, ONYX_REG_ADC_CONTROL, &v);
+ n = v;
+ n &= ~ONYX_ADC_PGA_GAIN_MASK;
+ n |= (ucontrol->value.integer.value[0] - INPUTGAIN_RANGE_SHIFT)
+ & ONYX_ADC_PGA_GAIN_MASK;
+ onyx_write_register(onyx, ONYX_REG_ADC_CONTROL, n);
+ mutex_unlock(&onyx->mutex);
+
+ return n != v;
+}
+
+static struct snd_kcontrol_new inputgain_control = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Master Capture Volume",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .info = onyx_snd_inputgain_info,
+ .get = onyx_snd_inputgain_get,
+ .put = onyx_snd_inputgain_put,
+};
+
+static int onyx_snd_capture_source_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ static char *texts[] = { "Line-In", "Microphone" };
+
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+ uinfo->count = 1;
+ uinfo->value.enumerated.items = 2;
+ if (uinfo->value.enumerated.item > 1)
+ uinfo->value.enumerated.item = 1;
+ strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]);
+ return 0;
+}
+
+static int onyx_snd_capture_source_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct onyx *onyx = snd_kcontrol_chip(kcontrol);
+ s8 v;
+
+ mutex_lock(&onyx->mutex);
+ onyx_read_register(onyx, ONYX_REG_ADC_CONTROL, &v);
+ mutex_unlock(&onyx->mutex);
+
+ ucontrol->value.enumerated.item[0] = !!(v&ONYX_ADC_INPUT_MIC);
+
+ return 0;
+}
+
+static void onyx_set_capture_source(struct onyx *onyx, int mic)
+{
+ s8 v;
+
+ mutex_lock(&onyx->mutex);
+ onyx_read_register(onyx, ONYX_REG_ADC_CONTROL, &v);
+ v &= ~ONYX_ADC_INPUT_MIC;
+ if (mic)
+ v |= ONYX_ADC_INPUT_MIC;
+ onyx_write_register(onyx, ONYX_REG_ADC_CONTROL, v);
+ mutex_unlock(&onyx->mutex);
+}
+
+static int onyx_snd_capture_source_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ onyx_set_capture_source(snd_kcontrol_chip(kcontrol),
+ ucontrol->value.enumerated.item[0]);
+ return 1;
+}
+
+static struct snd_kcontrol_new capture_source_control = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ /* If we name this 'Input Source', it properly shows up in
+ * alsamixer as a selection, * but it's shown under the
+ * 'Playback' category.
+ * If I name it 'Capture Source', it shows up in strange
+ * ways (two bools of which one can be selected at a
+ * time) but at least it's shown in the 'Capture'
+ * category.
+ * I was told that this was due to backward compatibility,
+ * but I don't understand then why the mangling is *not*
+ * done when I name it "Input Source".....
+ */
+ .name = "Capture Source",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .info = onyx_snd_capture_source_info,
+ .get = onyx_snd_capture_source_get,
+ .put = onyx_snd_capture_source_put,
+};
+
+static int onyx_snd_mute_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+ uinfo->count = 2;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 1;
+ return 0;
+}
+
+static int onyx_snd_mute_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct onyx *onyx = snd_kcontrol_chip(kcontrol);
+ u8 c;
+
+ mutex_lock(&onyx->mutex);
+ onyx_read_register(onyx, ONYX_REG_DAC_CONTROL, &c);
+ mutex_unlock(&onyx->mutex);
+
+ ucontrol->value.integer.value[0] = !(c & ONYX_MUTE_LEFT);
+ ucontrol->value.integer.value[1] = !(c & ONYX_MUTE_RIGHT);
+
+ return 0;
+}
+
+static int onyx_snd_mute_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct onyx *onyx = snd_kcontrol_chip(kcontrol);
+ u8 v, c;
+ int err = -EBUSY;
+
+ mutex_lock(&onyx->mutex);
+ if (onyx->analog_locked)
+ goto out_unlock;
+
+ onyx_read_register(onyx, ONYX_REG_DAC_CONTROL, &v);
+ c = v;
+ c &= ~(ONYX_MUTE_RIGHT | ONYX_MUTE_LEFT);
+ if (!ucontrol->value.integer.value[0])
+ c |= ONYX_MUTE_LEFT;
+ if (!ucontrol->value.integer.value[1])
+ c |= ONYX_MUTE_RIGHT;
+ err = onyx_write_register(onyx, ONYX_REG_DAC_CONTROL, c);
+
+ out_unlock:
+ mutex_unlock(&onyx->mutex);
+
+ return !err ? (v != c) : err;
+}
+
+static struct snd_kcontrol_new mute_control = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Master Playback Switch",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .info = onyx_snd_mute_info,
+ .get = onyx_snd_mute_get,
+ .put = onyx_snd_mute_put,
+};
+
+
+static int onyx_snd_single_bit_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 1;
+ return 0;
+}
+
+#define FLAG_POLARITY_INVERT 1
+#define FLAG_SPDIFLOCK 2
+
+static int onyx_snd_single_bit_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct onyx *onyx = snd_kcontrol_chip(kcontrol);
+ u8 c;
+ long int pv = kcontrol->private_value;
+ u8 polarity = (pv >> 16) & FLAG_POLARITY_INVERT;
+ u8 address = (pv >> 8) & 0xff;
+ u8 mask = pv & 0xff;
+
+ mutex_lock(&onyx->mutex);
+ onyx_read_register(onyx, address, &c);
+ mutex_unlock(&onyx->mutex);
+
+ ucontrol->value.integer.value[0] = !!(c & mask) ^ polarity;
+
+ return 0;
+}
+
+static int onyx_snd_single_bit_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct onyx *onyx = snd_kcontrol_chip(kcontrol);
+ u8 v, c;
+ int err;
+ long int pv = kcontrol->private_value;
+ u8 polarity = (pv >> 16) & FLAG_POLARITY_INVERT;
+ u8 spdiflock = (pv >> 16) & FLAG_SPDIFLOCK;
+ u8 address = (pv >> 8) & 0xff;
+ u8 mask = pv & 0xff;
+
+ mutex_lock(&onyx->mutex);
+ if (spdiflock && onyx->spdif_locked) {
+ /* even if alsamixer doesn't care.. */
+ err = -EBUSY;
+ goto out_unlock;
+ }
+ onyx_read_register(onyx, address, &v);
+ c = v;
+ c &= ~(mask);
+ if (!!ucontrol->value.integer.value[0] ^ polarity)
+ c |= mask;
+ err = onyx_write_register(onyx, address, c);
+
+ out_unlock:
+ mutex_unlock(&onyx->mutex);
+
+ return !err ? (v != c) : err;
+}
+
+#define SINGLE_BIT(n, type, description, address, mask, flags) \
+static struct snd_kcontrol_new n##_control = { \
+ .iface = SNDRV_CTL_ELEM_IFACE_##type, \
+ .name = description, \
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, \
+ .info = onyx_snd_single_bit_info, \
+ .get = onyx_snd_single_bit_get, \
+ .put = onyx_snd_single_bit_put, \
+ .private_value = (flags << 16) | (address << 8) | mask \
+}
+
+SINGLE_BIT(spdif,
+ MIXER,
+ SNDRV_CTL_NAME_IEC958("", PLAYBACK, SWITCH),
+ ONYX_REG_DIG_INFO4,
+ ONYX_SPDIF_ENABLE,
+ FLAG_SPDIFLOCK);
+SINGLE_BIT(ovr1,
+ MIXER,
+ "Oversampling Rate",
+ ONYX_REG_DAC_CONTROL,
+ ONYX_OVR1,
+ 0);
+SINGLE_BIT(flt0,
+ MIXER,
+ "Fast Digital Filter Rolloff",
+ ONYX_REG_DAC_FILTER,
+ ONYX_ROLLOFF_FAST,
+ FLAG_POLARITY_INVERT);
+SINGLE_BIT(hpf,
+ MIXER,
+ "Highpass Filter",
+ ONYX_REG_ADC_HPF_BYPASS,
+ ONYX_HPF_DISABLE,
+ FLAG_POLARITY_INVERT);
+SINGLE_BIT(dm12,
+ MIXER,
+ "Digital De-Emphasis",
+ ONYX_REG_DAC_DEEMPH,
+ ONYX_DIGDEEMPH_CTRL,
+ 0);
+
+static int onyx_spdif_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
+ uinfo->count = 1;
+ return 0;
+}
+
+static int onyx_spdif_mask_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ /* datasheet page 30, all others are 0 */
+ ucontrol->value.iec958.status[0] = 0x3e;
+ ucontrol->value.iec958.status[1] = 0xff;
+
+ ucontrol->value.iec958.status[3] = 0x3f;
+ ucontrol->value.iec958.status[4] = 0x0f;
+
+ return 0;
+}
+
+static struct snd_kcontrol_new onyx_spdif_mask = {
+ .access = SNDRV_CTL_ELEM_ACCESS_READ,
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
+ .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,CON_MASK),
+ .info = onyx_spdif_info,
+ .get = onyx_spdif_mask_get,
+};
+
+static int onyx_spdif_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct onyx *onyx = snd_kcontrol_chip(kcontrol);
+ u8 v;
+
+ mutex_lock(&onyx->mutex);
+ onyx_read_register(onyx, ONYX_REG_DIG_INFO1, &v);
+ ucontrol->value.iec958.status[0] = v & 0x3e;
+
+ onyx_read_register(onyx, ONYX_REG_DIG_INFO2, &v);
+ ucontrol->value.iec958.status[1] = v;
+
+ onyx_read_register(onyx, ONYX_REG_DIG_INFO3, &v);
+ ucontrol->value.iec958.status[3] = v & 0x3f;
+
+ onyx_read_register(onyx, ONYX_REG_DIG_INFO4, &v);
+ ucontrol->value.iec958.status[4] = v & 0x0f;
+ mutex_unlock(&onyx->mutex);
+
+ return 0;
+}
+
+static int onyx_spdif_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct onyx *onyx = snd_kcontrol_chip(kcontrol);
+ u8 v;
+
+ mutex_lock(&onyx->mutex);
+ onyx_read_register(onyx, ONYX_REG_DIG_INFO1, &v);
+ v = (v & ~0x3e) | (ucontrol->value.iec958.status[0] & 0x3e);
+ onyx_write_register(onyx, ONYX_REG_DIG_INFO1, v);
+
+ v = ucontrol->value.iec958.status[1];
+ onyx_write_register(onyx, ONYX_REG_DIG_INFO2, v);
+
+ onyx_read_register(onyx, ONYX_REG_DIG_INFO3, &v);
+ v = (v & ~0x3f) | (ucontrol->value.iec958.status[3] & 0x3f);
+ onyx_write_register(onyx, ONYX_REG_DIG_INFO3, v);
+
+ onyx_read_register(onyx, ONYX_REG_DIG_INFO4, &v);
+ v = (v & ~0x0f) | (ucontrol->value.iec958.status[4] & 0x0f);
+ onyx_write_register(onyx, ONYX_REG_DIG_INFO4, v);
+ mutex_unlock(&onyx->mutex);
+
+ return 1;
+}
+
+static struct snd_kcontrol_new onyx_spdif_ctrl = {
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
+ .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT),
+ .info = onyx_spdif_info,
+ .get = onyx_spdif_get,
+ .put = onyx_spdif_put,
+};
+
+/* our registers */
+
+static u8 register_map[] = {
+ ONYX_REG_DAC_ATTEN_LEFT,
+ ONYX_REG_DAC_ATTEN_RIGHT,
+ ONYX_REG_CONTROL,
+ ONYX_REG_DAC_CONTROL,
+ ONYX_REG_DAC_DEEMPH,
+ ONYX_REG_DAC_FILTER,
+ ONYX_REG_DAC_OUTPHASE,
+ ONYX_REG_ADC_CONTROL,
+ ONYX_REG_ADC_HPF_BYPASS,
+ ONYX_REG_DIG_INFO1,
+ ONYX_REG_DIG_INFO2,
+ ONYX_REG_DIG_INFO3,
+ ONYX_REG_DIG_INFO4
+};
+
+static u8 initial_values[ARRAY_SIZE(register_map)] = {
+ 0x80, 0x80, /* muted */
+ ONYX_MRST | ONYX_SRST, /* but handled specially! */
+ ONYX_MUTE_LEFT | ONYX_MUTE_RIGHT,
+ 0, /* no deemphasis */
+ ONYX_DAC_FILTER_ALWAYS,
+ ONYX_OUTPHASE_INVERTED,
+ (-1 /*dB*/ + 8) & 0xF, /* line in selected, -1 dB gain*/
+ ONYX_ADC_HPF_ALWAYS,
+ (1<<2), /* pcm audio */
+ 2, /* category: pcm coder */
+ 0, /* sampling frequency 44.1 kHz, clock accuracy level II */
+ 1 /* 24 bit depth */
+};
+
+/* reset registers of chip, either to initial or to previous values */
+static int onyx_register_init(struct onyx *onyx)
+{
+ int i;
+ u8 val;
+ u8 regs[sizeof(initial_values)];
+
+ if (!onyx->initialised) {
+ memcpy(regs, initial_values, sizeof(initial_values));
+ if (onyx_read_register(onyx, ONYX_REG_CONTROL, &val))
+ return -1;
+ val &= ~ONYX_SILICONVERSION;
+ val |= initial_values[3];
+ regs[3] = val;
+ } else {
+ for (i=0; i<sizeof(register_map); i++)
+ regs[i] = onyx->cache[register_map[i]-FIRSTREGISTER];
+ }
+
+ for (i=0; i<sizeof(register_map); i++) {
+ if (onyx_write_register(onyx, register_map[i], regs[i]))
+ return -1;
+ }
+ onyx->initialised = 1;
+ return 0;
+}
+
+static struct transfer_info onyx_transfers[] = {
+ /* this is first so we can skip it if no input is present...
+ * No hardware exists with that, but it's here as an example
+ * of what to do :) */
+ {
+ /* analog input */
+ .formats = SNDRV_PCM_FMTBIT_S8 |
+ SNDRV_PCM_FMTBIT_S16_BE |
+ SNDRV_PCM_FMTBIT_S24_BE,
+ .rates = SNDRV_PCM_RATE_8000_96000,
+ .transfer_in = 1,
+ .must_be_clock_source = 0,
+ .tag = 0,
+ },
+ {
+ /* if analog and digital are currently off, anything should go,
+ * so this entry describes everything we can do... */
+ .formats = SNDRV_PCM_FMTBIT_S8 |
+ SNDRV_PCM_FMTBIT_S16_BE |
+ SNDRV_PCM_FMTBIT_S24_BE
+#ifdef SNDRV_PCM_FMTBIT_COMPRESSED_16BE
+ | SNDRV_PCM_FMTBIT_COMPRESSED_16BE
+#endif
+ ,
+ .rates = SNDRV_PCM_RATE_8000_96000,
+ .tag = 0,
+ },
+ {
+ /* analog output */
+ .formats = SNDRV_PCM_FMTBIT_S8 |
+ SNDRV_PCM_FMTBIT_S16_BE |
+ SNDRV_PCM_FMTBIT_S24_BE,
+ .rates = SNDRV_PCM_RATE_8000_96000,
+ .transfer_in = 0,
+ .must_be_clock_source = 0,
+ .tag = 1,
+ },
+ {
+ /* digital pcm output, also possible for analog out */
+ .formats = SNDRV_PCM_FMTBIT_S8 |
+ SNDRV_PCM_FMTBIT_S16_BE |
+ SNDRV_PCM_FMTBIT_S24_BE,
+ .rates = SNDRV_PCM_RATE_32000 |
+ SNDRV_PCM_RATE_44100 |
+ SNDRV_PCM_RATE_48000,
+ .transfer_in = 0,
+ .must_be_clock_source = 0,
+ .tag = 2,
+ },
+#ifdef SNDRV_PCM_FMTBIT_COMPRESSED_16BE
+Once alsa gets supports for this kind of thing we can add it...
+ {
+ /* digital compressed output */
+ .formats = SNDRV_PCM_FMTBIT_COMPRESSED_16BE,
+ .rates = SNDRV_PCM_RATE_32000 |
+ SNDRV_PCM_RATE_44100 |
+ SNDRV_PCM_RATE_48000,
+ .tag = 2,
+ },
+#endif
+ {}
+};
+
+static int onyx_usable(struct codec_info_item *cii,
+ struct transfer_info *ti,
+ struct transfer_info *out)
+{
+ u8 v;
+ struct onyx *onyx = cii->codec_data;
+ int spdif_enabled, analog_enabled;
+
+ mutex_lock(&onyx->mutex);
+ onyx_read_register(onyx, ONYX_REG_DIG_INFO4, &v);
+ spdif_enabled = !!(v & ONYX_SPDIF_ENABLE);
+ onyx_read_register(onyx, ONYX_REG_DAC_CONTROL, &v);
+ analog_enabled =
+ (v & (ONYX_MUTE_RIGHT|ONYX_MUTE_LEFT))
+ != (ONYX_MUTE_RIGHT|ONYX_MUTE_LEFT);
+ mutex_unlock(&onyx->mutex);
+
+ switch (ti->tag) {
+ case 0: return 1;
+ case 1: return analog_enabled;
+ case 2: return spdif_enabled;
+ }
+ return 1;
+}
+
+static int onyx_prepare(struct codec_info_item *cii,
+ struct bus_info *bi,
+ struct snd_pcm_substream *substream)
+{
+ u8 v;
+ struct onyx *onyx = cii->codec_data;
+ int err = -EBUSY;
+
+ mutex_lock(&onyx->mutex);
+
+#ifdef SNDRV_PCM_FMTBIT_COMPRESSED_16BE
+ if (substream->runtime->format == SNDRV_PCM_FMTBIT_COMPRESSED_16BE) {
+ /* mute and lock analog output */
+ onyx_read_register(onyx, ONYX_REG_DAC_CONTROL, &v);
+ if (onyx_write_register(onyx
+ ONYX_REG_DAC_CONTROL,
+ v | ONYX_MUTE_RIGHT | ONYX_MUTE_LEFT))
+ goto out_unlock;
+ onyx->analog_locked = 1;
+ err = 0;
+ goto out_unlock;
+ }
+#endif
+ switch (substream->runtime->rate) {
+ case 32000:
+ case 44100:
+ case 48000:
+ /* these rates are ok for all outputs */
+ /* FIXME: program spdif channel control bits here so that
+ * userspace doesn't have to if it only plays pcm! */
+ err = 0;
+ goto out_unlock;
+ default:
+ /* got some rate that the digital output can't do,
+ * so disable and lock it */
+ onyx_read_register(cii->codec_data, ONYX_REG_DIG_INFO4, &v);
+ if (onyx_write_register(onyx,
+ ONYX_REG_DIG_INFO4,
+ v & ~ONYX_SPDIF_ENABLE))
+ goto out_unlock;
+ onyx->spdif_locked = 1;
+ err = 0;
+ goto out_unlock;
+ }
+
+ out_unlock:
+ mutex_unlock(&onyx->mutex);
+
+ return err;
+}
+
+static int onyx_open(struct codec_info_item *cii,
+ struct snd_pcm_substream *substream)
+{
+ struct onyx *onyx = cii->codec_data;
+
+ mutex_lock(&onyx->mutex);
+ onyx->open_count++;
+ mutex_unlock(&onyx->mutex);
+
+ return 0;
+}
+
+static int onyx_close(struct codec_info_item *cii,
+ struct snd_pcm_substream *substream)
+{
+ struct onyx *onyx = cii->codec_data;
+
+ mutex_lock(&onyx->mutex);
+ onyx->open_count--;
+ if (!onyx->open_count)
+ onyx->spdif_locked = onyx->analog_locked = 0;
+ mutex_unlock(&onyx->mutex);
+
+ return 0;
+}
+
+static int onyx_switch_clock(struct codec_info_item *cii,
+ enum clock_switch what)
+{
+ struct onyx *onyx = cii->codec_data;
+
+ mutex_lock(&onyx->mutex);
+ /* this *MUST* be more elaborate later... */
+ switch (what) {
+ case CLOCK_SWITCH_PREPARE_SLAVE:
+ onyx->codec.gpio->methods->all_amps_off(onyx->codec.gpio);
+ break;
+ case CLOCK_SWITCH_SLAVE:
+ onyx->codec.gpio->methods->all_amps_restore(onyx->codec.gpio);
+ break;
+ default: /* silence warning */
+ break;
+ }
+ mutex_unlock(&onyx->mutex);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int onyx_suspend(struct codec_info_item *cii, pm_message_t state)
+{
+ struct onyx *onyx = cii->codec_data;
+ u8 v;
+ int err = -ENXIO;
+
+ mutex_lock(&onyx->mutex);
+ if (onyx_read_register(onyx, ONYX_REG_CONTROL, &v))
+ goto out_unlock;
+ onyx_write_register(onyx, ONYX_REG_CONTROL, v | ONYX_ADPSV | ONYX_DAPSV);
+ /* Apple does a sleep here but the datasheet says to do it on resume */
+ err = 0;
+ out_unlock:
+ mutex_unlock(&onyx->mutex);
+
+ return err;
+}
+
+static int onyx_resume(struct codec_info_item *cii)
+{
+ struct onyx *onyx = cii->codec_data;
+ u8 v;
+ int err = -ENXIO;
+
+ mutex_lock(&onyx->mutex);
+ /* take codec out of suspend */
+ if (onyx_read_register(onyx, ONYX_REG_CONTROL, &v))
+ goto out_unlock;
+ onyx_write_register(onyx, ONYX_REG_CONTROL, v & ~(ONYX_ADPSV | ONYX_DAPSV));
+ /* FIXME: should divide by sample rate, but 8k is the lowest we go */
+ msleep(2205000/8000);
+ /* reset all values */
+ onyx_register_init(onyx);
+ err = 0;
+ out_unlock:
+ mutex_unlock(&onyx->mutex);
+
+ return err;
+}
+
+#endif /* CONFIG_PM */
+
+static struct codec_info onyx_codec_info = {
+ .transfers = onyx_transfers,
+ .sysclock_factor = 256,
+ .bus_factor = 64,
+ .owner = THIS_MODULE,
+ .usable = onyx_usable,
+ .prepare = onyx_prepare,
+ .open = onyx_open,
+ .close = onyx_close,
+ .switch_clock = onyx_switch_clock,
+#ifdef CONFIG_PM
+ .suspend = onyx_suspend,
+ .resume = onyx_resume,
+#endif
+};
+
+static int onyx_init_codec(struct aoa_codec *codec)
+{
+ struct onyx *onyx = codec_to_onyx(codec);
+ struct snd_kcontrol *ctl;
+ struct codec_info *ci = &onyx_codec_info;
+ u8 v;
+ int err;
+
+ if (!onyx->codec.gpio || !onyx->codec.gpio->methods) {
+ printk(KERN_ERR PFX "gpios not assigned!!\n");
+ return -EINVAL;
+ }
+
+ onyx->codec.gpio->methods->set_hw_reset(onyx->codec.gpio, 0);
+ msleep(1);
+ onyx->codec.gpio->methods->set_hw_reset(onyx->codec.gpio, 1);
+ msleep(1);
+ onyx->codec.gpio->methods->set_hw_reset(onyx->codec.gpio, 0);
+ msleep(1);
+
+ if (onyx_register_init(onyx)) {
+ printk(KERN_ERR PFX "failed to initialise onyx registers\n");
+ return -ENODEV;
+ }
+
+ if (aoa_snd_device_new(SNDRV_DEV_LOWLEVEL, onyx, &ops)) {
+ printk(KERN_ERR PFX "failed to create onyx snd device!\n");
+ return -ENODEV;
+ }
+
+ /* nothing connected? what a joke! */
+ if ((onyx->codec.connected & 0xF) == 0)
+ return -ENOTCONN;
+
+ /* if no inputs are present... */
+ if ((onyx->codec.connected & 0xC) == 0) {
+ if (!onyx->codec_info)
+ onyx->codec_info = kmalloc(sizeof(struct codec_info), GFP_KERNEL);
+ if (!onyx->codec_info)
+ return -ENOMEM;
+ ci = onyx->codec_info;
+ *ci = onyx_codec_info;
+ ci->transfers++;
+ }
+
+ /* if no outputs are present... */
+ if ((onyx->codec.connected & 3) == 0) {
+ if (!onyx->codec_info)
+ onyx->codec_info = kmalloc(sizeof(struct codec_info), GFP_KERNEL);
+ if (!onyx->codec_info)
+ return -ENOMEM;
+ ci = onyx->codec_info;
+ /* this is fine as there have to be inputs
+ * if we end up in this part of the code */
+ *ci = onyx_codec_info;
+ ci->transfers[1].formats = 0;
+ }
+
+ if (onyx->codec.soundbus_dev->attach_codec(onyx->codec.soundbus_dev,
+ aoa_get_card(),
+ ci, onyx)) {
+ printk(KERN_ERR PFX "error creating onyx pcm\n");
+ return -ENODEV;
+ }
+#define ADDCTL(n) \
+ do { \
+ ctl = snd_ctl_new1(&n, onyx); \
+ if (ctl) { \
+ ctl->id.device = \
+ onyx->codec.soundbus_dev->pcm->device; \
+ err = aoa_snd_ctl_add(ctl); \
+ if (err) \
+ goto error; \
+ } \
+ } while (0)
+
+ if (onyx->codec.soundbus_dev->pcm) {
+ /* give the user appropriate controls
+ * depending on what inputs are connected */
+ if ((onyx->codec.connected & 0xC) == 0xC)
+ ADDCTL(capture_source_control);
+ else if (onyx->codec.connected & 4)
+ onyx_set_capture_source(onyx, 0);
+ else
+ onyx_set_capture_source(onyx, 1);
+ if (onyx->codec.connected & 0xC)
+ ADDCTL(inputgain_control);
+
+ /* depending on what output is connected,
+ * give the user appropriate controls */
+ if (onyx->codec.connected & 1) {
+ ADDCTL(volume_control);
+ ADDCTL(mute_control);
+ ADDCTL(ovr1_control);
+ ADDCTL(flt0_control);
+ ADDCTL(hpf_control);
+ ADDCTL(dm12_control);
+ /* spdif control defaults to off */
+ }
+ if (onyx->codec.connected & 2) {
+ ADDCTL(onyx_spdif_mask);
+ ADDCTL(onyx_spdif_ctrl);
+ }
+ if ((onyx->codec.connected & 3) == 3)
+ ADDCTL(spdif_control);
+ /* if only S/PDIF is connected, enable it unconditionally */
+ if ((onyx->codec.connected & 3) == 2) {
+ onyx_read_register(onyx, ONYX_REG_DIG_INFO4, &v);
+ v |= ONYX_SPDIF_ENABLE;
+ onyx_write_register(onyx, ONYX_REG_DIG_INFO4, v);
+ }
+ }
+#undef ADDCTL
+ printk(KERN_INFO PFX "attached to onyx codec via i2c\n");
+
+ return 0;
+ error:
+ onyx->codec.soundbus_dev->detach_codec(onyx->codec.soundbus_dev, onyx);
+ snd_device_free(aoa_get_card(), onyx);
+ return err;
+}
+
+static void onyx_exit_codec(struct aoa_codec *codec)
+{
+ struct onyx *onyx = codec_to_onyx(codec);
+
+ if (!onyx->codec.soundbus_dev) {
+ printk(KERN_ERR PFX "onyx_exit_codec called without soundbus_dev!\n");
+ return;
+ }
+ onyx->codec.soundbus_dev->detach_codec(onyx->codec.soundbus_dev, onyx);
+}
+
+static struct i2c_driver onyx_driver;
+
+static int onyx_create(struct i2c_adapter *adapter,
+ struct device_node *node,
+ int addr)
+{
+ struct onyx *onyx;
+ u8 dummy;
+
+ onyx = kzalloc(sizeof(struct onyx), GFP_KERNEL);
+
+ if (!onyx)
+ return -ENOMEM;
+
+ mutex_init(&onyx->mutex);
+ onyx->i2c.driver = &onyx_driver;
+ onyx->i2c.adapter = adapter;
+ onyx->i2c.addr = addr & 0x7f;
+ strlcpy(onyx->i2c.name, "onyx audio codec", I2C_NAME_SIZE-1);
+
+ if (i2c_attach_client(&onyx->i2c)) {
+ printk(KERN_ERR PFX "failed to attach to i2c\n");
+ goto fail;
+ }
+
+ /* we try to read from register ONYX_REG_CONTROL
+ * to check if the codec is present */
+ if (onyx_read_register(onyx, ONYX_REG_CONTROL, &dummy) != 0) {
+ i2c_detach_client(&onyx->i2c);
+ printk(KERN_ERR PFX "failed to read control register\n");
+ goto fail;
+ }
+
+ strlcpy(onyx->codec.name, "onyx", MAX_CODEC_NAME_LEN-1);
+ onyx->codec.owner = THIS_MODULE;
+ onyx->codec.init = onyx_init_codec;
+ onyx->codec.exit = onyx_exit_codec;
+ onyx->codec.node = of_node_get(node);
+
+ if (aoa_codec_register(&onyx->codec)) {
+ i2c_detach_client(&onyx->i2c);
+ goto fail;
+ }
+ printk(KERN_DEBUG PFX "created and attached onyx instance\n");
+ return 0;
+ fail:
+ kfree(onyx);
+ return -EINVAL;
+}
+
+static int onyx_i2c_attach(struct i2c_adapter *adapter)
+{
+ struct device_node *busnode, *dev = NULL;
+ struct pmac_i2c_bus *bus;
+
+ bus = pmac_i2c_adapter_to_bus(adapter);
+ if (bus == NULL)
+ return -ENODEV;
+ busnode = pmac_i2c_get_bus_node(bus);
+
+ while ((dev = of_get_next_child(busnode, dev)) != NULL) {
+ if (device_is_compatible(dev, "pcm3052")) {
+ u32 *addr;
+ printk(KERN_DEBUG PFX "found pcm3052\n");
+ addr = (u32 *) get_property(dev, "reg", NULL);
+ if (!addr)
+ return -ENODEV;
+ return onyx_create(adapter, dev, (*addr)>>1);
+ }
+ }
+
+ /* if that didn't work, try desperate mode for older
+ * machines that have stuff missing from the device tree */
+
+ if (!device_is_compatible(busnode, "k2-i2c"))
+ return -ENODEV;
+
+ printk(KERN_DEBUG PFX "found k2-i2c, checking if onyx chip is on it\n");
+ /* probe both possible addresses for the onyx chip */
+ if (onyx_create(adapter, NULL, 0x46) == 0)
+ return 0;
+ return onyx_create(adapter, NULL, 0x47);
+}
+
+static int onyx_i2c_detach(struct i2c_client *client)
+{
+ struct onyx *onyx = container_of(client, struct onyx, i2c);
+ int err;
+
+ if ((err = i2c_detach_client(client)))
+ return err;
+ aoa_codec_unregister(&onyx->codec);
+ of_node_put(onyx->codec.node);
+ if (onyx->codec_info)
+ kfree(onyx->codec_info);
+ kfree(onyx);
+ return 0;
+}
+
+static struct i2c_driver onyx_driver = {
+ .driver = {
+ .name = "aoa_codec_onyx",
+ .owner = THIS_MODULE,
+ },
+ .attach_adapter = onyx_i2c_attach,
+ .detach_client = onyx_i2c_detach,
+};
+
+static int __init onyx_init(void)
+{
+ return i2c_add_driver(&onyx_driver);
+}
+
+static void __exit onyx_exit(void)
+{
+ i2c_del_driver(&onyx_driver);
+}
+
+module_init(onyx_init);
+module_exit(onyx_exit);
--
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/alsa-devel
