A NOTE has been added to this issue. ====================================================================== <https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2140> ====================================================================== Reported By: jacobs Assigned To: tiwai ====================================================================== Project: ALSA - driver Issue ID: 2140 Category: PCI - hda-intel Reproducibility: always Severity: major Priority: normal Status: assigned Distribution: OpenSuSE 10.1 Kernel Version: 2.6.16.13 ====================================================================== Date Submitted: 05-22-2006 10:17 CEST Last Modified: 06-07-2006 11:14 CEST ====================================================================== Summary: No sound from mic on Fujitsu Siemens Amilo M3438G Description: I own a Fujitsu Siemens Amilo M3438G notebook with an onboard Azalia 7.1 SPDIF chipset/codec (see spec sheet at http://www.fujitsu-siemens.de/ps/db/notebook/ds_amilo_m3438g_m4438g_d.pdf). OpenSuSE 10.1 (Kernel 2.6.16.13) is installed; the module snd-hda-intel is loaded. Sound playback through the internal speakers and headphone does work but I am unable to get sound from the internal and external microphone. The alsamixer has three capture controls which all are set to capture and maximum volume. Each capture controls source is set to mic. The playback channel for mic is unmuted and also set to maximum volume but I just don't get a signal. I've tried to apply different model options to the snd-hda-intel module relating to the file ALSA-Configuration.txt without luck. This didn't work with OpenSuSE 10.0 (Kernel 2.6.13) either. If you need any technical information please let me know. ====================================================================== ---------------------------------------------------------------------- jacobs - 05-29-06 08:26 ---------------------------------------------------------------------- Hello el, I've tried that but it doesn't give satisfying results. First of all the channels are assigned falsely, e.g. Front is actually the headphone. At least they were correct when I didn't pass model=auto to the module. Secondly I only get a signal from the microphone when I shout into it (=when it's loud) plus the sound quality is pretty bad. ---------------------------------------------------------------------- der_sprengmeister - 06-07-06 11:14 ---------------------------------------------------------------------- Hello jacobs. Have you looked at my thread: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2167 I have a solution fot the wrong mixer. It would be nice, if you could proof the inputs, because I have no microphones here Bye! Issue History Date Modified Username Field Change ====================================================================== 05-22-06 10:17 jacobs New Issue 05-22-06 10:17 jacobs Distribution => OpenSuSE 10.1 05-22-06 10:17 jacobs Kernel Version => 2.6.16.13 05-23-06 07:35 jacobs Issue Monitored: jacobs 05-26-06 19:13 el Issue Monitored: el 05-26-06 19:26 el Note Added: 0009979 05-29-06 08:26 jacobs Note Added: 0010007 06-07-06 11:14 der_sprengmeisterNote Added: 0010079 ====================================================================== _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-devel
