[ALSA - utils 0002134]: arecord doesn't work in amd x86_64 X2 dual core.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2134> 
======================================================================
Reported By:                bolsog
Assigned To:                
======================================================================
Project:                    ALSA - utils
Issue ID:                   2134
Category:                   aplay/arecord
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     new
======================================================================
Date Submitted:             05-18-2006 13:25 CEST
Last Modified:              05-22-2006 11:57 CEST
======================================================================
Summary:                    arecord doesn't work in amd x86_64 X2 dual core.
Description: 
arecord doen't work on a amd x86_64 X2 dual core.

examples:
arecord -d 10 -c 2 -f S16_LE -r 32000 foo.wav
arecord -d 10 -f S16_LE -r 48000 foo.wav
arecord -d 10 -f S16_LE -r 32000 foo.wav
arecord -d 10 -f S16_LE -r 16000 foo.wav

all examples must be terminated using Ctrl-c and only the 44 byte header
is saved. 

The soundcard is a 
Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio
Controller
(rev a2)

We tested this problem on a similar pc with amd x86_64 single core with
the same
soundcard and all works fine.

aplay works on both pcs without problems!

We tested on Fedora Core 4 (1.0.10) and Fedora Core 5 (1.0.11rc2)

We need recording on this pc, so we appreciate every help. Thanks.
======================================================================

----------------------------------------------------------------------
 Raymond - 05-21-06 14:15 
----------------------------------------------------------------------
How about arecord -v -D hw:0,0 -d 10 -f S16_LE -r 48000 -c 2 foo.wav ?

or

arecord -v -D plughw:0,0 -d 10 -f S16_LE -r 48000 foo.wav



----------------------------------------------------------------------
 bolsog - 05-22-06 11:57 
----------------------------------------------------------------------
| arecord -v -D hw:0,0 -d 10 -f S16_LE -r 48000 foo.wav

Recording WAVE 'foo.wav' : Signed 16 bit Little Endian, Rate 48000 Hz,
Stereo
Hardware PCM card 0 'NVidia CK804' device 0 subdevice 0
Its setup is:
  stream       : CAPTURE
  access       : RW_INTERLEAVED
  format       : S16_LE
  subformat    : STD
  channels     : 2
  rate         : 48000
  exact rate   : 48000 (48000/1)
  msbits       : 16
  buffer_size  : 16384
  period_size  : 4096
  period_time  : 85333
  tick_time    : 4000
  tstamp_mode  : NONE
  period_step  : 1
  sleep_min    : 0
  avail_min    : 4096
  xfer_align   : 4096
  start_threshold  : 1
  stop_threshold   : 16384
  silence_threshold: 0
  silence_size : 0
  boundary     : 4611686018427387904

arecord: pcm_read:1338: read error: Eingabe-/Ausgabefehler

--
And foo.wav wasn't created.

Eingabe-/Ausgabefehler means Input/Output-error. 
Our FC5 is installed with German root-account.

---

| arecord -v -D plughw:0,0 -d 10 -f S16_LE -r 48000 foo.wav

Recording WAVE 'foo.wav' : Signed 16 bit Little Endian, Rate 48000 Hz,
Mono
Plug PCM: Route conversion PCM (sformat=S16_LE)
  Transformation table:
    0 <- 0*0,5 + 1*0,5
Its setup is:
  stream       : CAPTURE
  access       : RW_INTERLEAVED
  format       : S16_LE
  subformat    : STD
  channels     : 1
  rate         : 48000
  exact rate   : 48000 (48000/1)
  msbits       : 16
  buffer_size  : 16384
  period_size  : 4096
  period_time  : 85333
  tick_time    : 4000
  tstamp_mode  : NONE
  period_step  : 1
  sleep_min    : 0
  avail_min    : 4096
  xfer_align   : 4096
  start_threshold  : 1
  stop_threshold   : 16384
  silence_threshold: 0
  silence_size : 0
  boundary     : 4611686018427387904
Slave: Hardware PCM card 0 'NVidia CK804' device 0 subdevice 0
Its setup is:
  stream       : CAPTURE
  access       : MMAP_INTERLEAVED
  format       : S16_LE
  subformat    : STD
  channels     : 2
  rate         : 48000
  exact rate   : 48000 (48000/1)
  msbits       : 16
  buffer_size  : 16384
  period_size  : 4096
  period_time  : 85333
  tick_time    : 4000
  tstamp_mode  : NONE
  period_step  : 1
  sleep_min    : 0
  avail_min    : 4096
  xfer_align   : 4096
  start_threshold  : 1
  stop_threshold   : 16384
  silence_threshold: 0
  silence_size : 0
  boundary     : 4611686018427387904

--
This command never stops. I pressed Ctrl-C and a 44byte foo.wav was
created.

--
I've used the root-account for both commands.

Issue History
Date Modified  Username       Field                    Change              
======================================================================
05-18-06 13:25 bolsog         New Issue                                    
05-21-06 14:12 Raymond        Note Added: 0009899                          
05-21-06 14:13 Raymond        Note Edited: 0009899                         
05-21-06 14:15 Raymond        Note Edited: 0009899                         
05-22-06 11:57 bolsog         Note Added: 0009907                          
======================================================================




-------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/alsa-devel

[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux