Re: eval clauses not executing.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



   Hi Zack. Actually, this code is the final part of Zsnes`s Zlib
   detection routine. As I tested the previous code extensively, I am
   fairly convinced that the problem lies in the piece that it is in my
   message.



   Anyway, I attached the configure script and also a bzipped tarball.





   02.04.2023, 17:25, "Zack Weinberg" <[1]zack@xxxxxxxxxxxx>:

     On Sun, Apr 2, 2023, at 4:17 PM, alexandre schenberg wrote:

      I have the following piece of code belonging to a larger zlib
     detection code.

     It looks to me like you've quoted the *generated* autoconf code. Can
     you
     please show us the source code? Note that the problem may be very
     far away
     from where you think it is; it would be best if you could either
     produce
     a "minimized test case" (the shortest possible, self-contained,
     configure.ac
     that still demonstrates the problem) or link us to your complete
     project.
     zw

References

   1. mailto:zack@xxxxxxxxxxxx
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
# Generated by GNU Autoconf 2.61.
#
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
## --------------------- ##
## M4sh Initialization.  ##
## --------------------- ##

# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
  emulate sh
  NULLCMD=:
  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
  # is contrary to our usage.  Disable this feature.
  alias -g '${1+"$@"}'='"$@"'
  setopt NO_GLOB_SUBST
else
  case `(set -o) 2>/dev/null` in
  *posix*) set -o posix ;;
esac

fi




# PATH needs CR
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits

# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
  echo "#! /bin/sh" >conf$$.sh
  echo  "exit 0"   >>conf$$.sh
  chmod +x conf$$.sh
  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
    PATH_SEPARATOR=';'
  else
    PATH_SEPARATOR=:
  fi
  rm -f conf$$.sh
fi

# Support unset when possible.
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
  as_unset=unset
else
  as_unset=false
fi


# IFS
# We need space, tab and new line, in precisely that order.  Quoting is
# there to prevent editors from complaining about space-tab.
# (If _AS_PATH_WALK were called with IFS unset, it would disable word
# splitting by setting IFS to empty value.)
as_nl='
'
IFS=" ""	$as_nl"

# Find who we are.  Look in the path if we contain no directory separator.
case $0 in
  *[\\/]* ) as_myself=$0 ;;
  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
done
IFS=$as_save_IFS

     ;;
esac
# We did not find ourselves, most probably we were run as `sh COMMAND'
# in which case we are not to be found in the path.
if test "x$as_myself" = x; then
  as_myself=$0
fi
if test ! -f "$as_myself"; then
  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
  { (exit 1); exit 1; }
fi

# Work around bugs in pre-3.0 UWIN ksh.
for as_var in ENV MAIL MAILPATH
do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
done
PS1='$ '
PS2='> '
PS4='+ '

# NLS nuisances.
for as_var in \
  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
  LC_TELEPHONE LC_TIME
do
  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
    eval $as_var=C; export $as_var
  else
    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
  fi
done

# Required to use basename.
if expr a : '\(a\)' >/dev/null 2>&1 &&
   test "X`expr 00001 : '.*\(...\)'`" = X001; then
  as_expr=expr
else
  as_expr=false
fi

if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
  as_basename=basename
else
  as_basename=false
fi


# Name of the executable.
as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
	 X"$0" : 'X\(//\)$' \| \
	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
echo X/"$0" |
    sed '/^.*\/\([^/][^/]*\)\/*$/{
	    s//\1/
	    q
	  }
	  /^X\/\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\/\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`

# CDPATH.
$as_unset CDPATH


if test "x$CONFIG_SHELL" = x; then
  if (eval ":") 2>/dev/null; then
  as_have_required=yes
else
  as_have_required=no
fi

  if test $as_have_required = yes && 	 (eval ":
(as_func_return () {
  (exit \$1)
}
as_func_success () {
  as_func_return 0
}
as_func_failure () {
  as_func_return 1
}
as_func_ret_success () {
  return 0
}
as_func_ret_failure () {
  return 1
}

exitcode=0
if as_func_success; then
  :
else
  exitcode=1
  echo as_func_success failed.
fi

if as_func_failure; then
  exitcode=1
  echo as_func_failure succeeded.
fi

if as_func_ret_success; then
  :
else
  exitcode=1
  echo as_func_ret_success failed.
fi

if as_func_ret_failure; then
  exitcode=1
  echo as_func_ret_failure succeeded.
fi

if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
  :
else
  exitcode=1
  echo positional parameters were not saved.
fi

test \$exitcode = 0) || { (exit 1); exit 1; }

(
  as_lineno_1=\$LINENO
  as_lineno_2=\$LINENO
  test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
  test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
") 2> /dev/null; then
  :
else
  as_candidate_shells=
    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  case $as_dir in
	 /*)
	   for as_base in sh bash ksh sh5; do
	     as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
	   done;;
       esac
done
IFS=$as_save_IFS


      for as_shell in $as_candidate_shells $SHELL; do
	 # Try only shells that exist, to save several forks.
	 if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
		{ ("$as_shell") 2> /dev/null <<\_ASEOF
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
  emulate sh
  NULLCMD=:
  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
  # is contrary to our usage.  Disable this feature.
  alias -g '${1+"$@"}'='"$@"'
  setopt NO_GLOB_SUBST
else
  case `(set -o) 2>/dev/null` in
  *posix*) set -o posix ;;
esac

fi


:
_ASEOF
}; then
  CONFIG_SHELL=$as_shell
	       as_have_required=yes
	       if { "$as_shell" 2> /dev/null <<\_ASEOF
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
  emulate sh
  NULLCMD=:
  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
  # is contrary to our usage.  Disable this feature.
  alias -g '${1+"$@"}'='"$@"'
  setopt NO_GLOB_SUBST
else
  case `(set -o) 2>/dev/null` in
  *posix*) set -o posix ;;
esac

fi


:
(as_func_return () {
  (exit $1)
}
as_func_success () {
  as_func_return 0
}
as_func_failure () {
  as_func_return 1
}
as_func_ret_success () {
  return 0
}
as_func_ret_failure () {
  return 1
}

exitcode=0
if as_func_success; then
  :
else
  exitcode=1
  echo as_func_success failed.
fi

if as_func_failure; then
  exitcode=1
  echo as_func_failure succeeded.
fi

if as_func_ret_success; then
  :
else
  exitcode=1
  echo as_func_ret_success failed.
fi

if as_func_ret_failure; then
  exitcode=1
  echo as_func_ret_failure succeeded.
fi

if ( set x; as_func_ret_success y && test x = "$1" ); then
  :
else
  exitcode=1
  echo positional parameters were not saved.
fi

test $exitcode = 0) || { (exit 1); exit 1; }

(
  as_lineno_1=$LINENO
  as_lineno_2=$LINENO
  test "x$as_lineno_1" != "x$as_lineno_2" &&
  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }

_ASEOF
}; then
  break
fi

fi

      done

      if test "x$CONFIG_SHELL" != x; then
  for as_var in BASH_ENV ENV
        do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
        done
        export CONFIG_SHELL
        exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
fi


    if test $as_have_required = no; then
  echo This script requires a shell more modern than all the
      echo shells that I found on your system.  Please install a
      echo modern shell, or manually run the script under such a
      echo shell if you do have one.
      { (exit 1); exit 1; }
fi


fi

fi



(eval "as_func_return () {
  (exit \$1)
}
as_func_success () {
  as_func_return 0
}
as_func_failure () {
  as_func_return 1
}
as_func_ret_success () {
  return 0
}
as_func_ret_failure () {
  return 1
}

exitcode=0
if as_func_success; then
  :
else
  exitcode=1
  echo as_func_success failed.
fi

if as_func_failure; then
  exitcode=1
  echo as_func_failure succeeded.
fi

if as_func_ret_success; then
  :
else
  exitcode=1
  echo as_func_ret_success failed.
fi

if as_func_ret_failure; then
  exitcode=1
  echo as_func_ret_failure succeeded.
fi

if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
  :
else
  exitcode=1
  echo positional parameters were not saved.
fi

test \$exitcode = 0") || {
  echo No shell found that supports shell functions.
  echo Please tell autoconf@xxxxxxx about your system,
  echo including any error possibly output before this
  echo message
}



  as_lineno_1=$LINENO
  as_lineno_2=$LINENO
  test "x$as_lineno_1" != "x$as_lineno_2" &&
  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {

  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
  # uniformly replaced by the line number.  The first 'sed' inserts a
  # line-number line after each line using $LINENO; the second 'sed'
  # does the real work.  The second script uses 'N' to pair each
  # line-number line with the line containing $LINENO, and appends
  # trailing '-' during substitution so that $LINENO is not a special
  # case at line end.
  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
  # scripts with optimization help from Paolo Bonzini.  Blame Lee
  # E. McMahon (1931-1989) for sed's syntax.  :-)
  sed -n '
    p
    /[$]LINENO/=
  ' <$as_myself |
    sed '
      s/[$]LINENO.*/&-/
      t lineno
      b
      :lineno
      N
      :loop
      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
      t loop
      s/-\n.*//
    ' >$as_me.lineno &&
  chmod +x "$as_me.lineno" ||
    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
   { (exit 1); exit 1; }; }

  # Don't try to exec as it changes $[0], causing all sort of problems
  # (the dirname of $[0] is not the place where we might find the
  # original and so on.  Autoconf is especially sensitive to this).
  . "./$as_me.lineno"
  # Exit status is that of the last command.
  exit
}


if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
  as_dirname=dirname
else
  as_dirname=false
fi

ECHO_C= ECHO_N= ECHO_T=
case `echo -n x` in
-n*)
  case `echo 'x\c'` in
  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
  *)   ECHO_C='\c';;
  esac;;
*)
  ECHO_N='-n';;
esac

if expr a : '\(a\)' >/dev/null 2>&1 &&
   test "X`expr 00001 : '.*\(...\)'`" = X001; then
  as_expr=expr
else
  as_expr=false
fi

rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
  rm -f conf$$.dir/conf$$.file
else
  rm -f conf$$.dir
  mkdir conf$$.dir
fi
echo >conf$$.file
if ln -s conf$$.file conf$$ 2>/dev/null; then
  as_ln_s='ln -s'
  # ... but there are two gotchas:
  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
  # In both cases, we have to default to `cp -p'.
  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
    as_ln_s='cp -p'
elif ln conf$$.file conf$$ 2>/dev/null; then
  as_ln_s=ln
else
  as_ln_s='cp -p'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null

if mkdir -p . 2>/dev/null; then
  as_mkdir_p=:
else
  test -d ./-p && rmdir ./-p
  as_mkdir_p=false
fi

if test -x / >/dev/null 2>&1; then
  as_test_x='test -x'
else
  if ls -dL / >/dev/null 2>&1; then
    as_ls_L_option=L
  else
    as_ls_L_option=
  fi
  as_test_x='
    eval sh -c '\''
      if test -d "$1"; then
        test -d "$1/.";
      else
	case $1 in
        -*)set "./$1";;
	esac;
	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
	???[sx]*):;;*)false;;esac;fi
    '\'' sh
  '
fi
as_executable_p=$as_test_x

# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"

# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"



exec 7<&0 </dev/null 6>&1

# Name of the host.
# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`

#
# Initializations.
#
ac_default_prefix=/usr/local
ac_clean_files=
ac_config_libobj_dir=.
LIBOBJS=
cross_compiling=no
subdirs=
MFLAGS=
MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}

# Identity of this package.
PACKAGE_NAME=
PACKAGE_TARNAME=
PACKAGE_VERSION=
PACKAGE_STRING=
PACKAGE_BUGREPORT=

ac_unique_file="zsnes"
ac_unique_file="init.asm"
# Factoring default headers for most tests.
ac_includes_default="\
#include <stdio.h>
#ifdef HAVE_SYS_TYPES_H
# include <sys/types.h>
#endif
#ifdef HAVE_SYS_STAT_H
# include <sys/stat.h>
#endif
#ifdef STDC_HEADERS
# include <stdlib.h>
# include <stddef.h>
#else
# ifdef HAVE_STDLIB_H
#  include <stdlib.h>
# endif
#endif
#ifdef HAVE_STRING_H
# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
#  include <memory.h>
# endif
# include <string.h>
#endif
#ifdef HAVE_STRINGS_H
# include <strings.h>
#endif
#ifdef HAVE_INTTYPES_H
# include <inttypes.h>
#endif
#ifdef HAVE_STDINT_H
# include <stdint.h>
#endif
#ifdef HAVE_UNISTD_H
# include <unistd.h>
#endif"

ac_subst_vars='SHELL
PATH_SEPARATOR
PACKAGE_NAME
PACKAGE_TARNAME
PACKAGE_VERSION
PACKAGE_STRING
PACKAGE_BUGREPORT
exec_prefix
prefix
program_transform_name
bindir
sbindir
libexecdir
datarootdir
datadir
sysconfdir
sharedstatedir
localstatedir
includedir
oldincludedir
docdir
infodir
htmldir
dvidir
pdfdir
psdir
libdir
localedir
mandir
DEFS
ECHO_C
ECHO_N
ECHO_T
LIBS
build_alias
host_alias
target_alias
build
build_cpu
build_vendor
build_os
host
host_cpu
host_vendor
host_os
target
target_cpu
target_vendor
target_os
INSTALL_PROGRAM
INSTALL_SCRIPT
INSTALL_DATA
CC
CFLAGS
LDFLAGS
CPPFLAGS
ac_ct_CC
EXEEXT
OBJEXT
CXX
CXXFLAGS
ac_ct_CXX
NASMPATH
SDL_CONFIG
SDL_CFLAGS
SDL_LIBS
ZLIB_CFLAGS
ZLIB_VERSION
ZLIB_LIBS
LIBPNG_CFLAGS
LIBPNG_VERSION
LIBPNG_LIBS
XMKMF
CPP
ARCH_INFO
force_arch
GREP
EGREP
VERSION
ZC
ZCFLAGS
PSRFLAGS
NFLAGS
ZSNESEXE
GL_DRAW
JMA_FILES
MMLIB_FILES
DEBUGGER_FILES
PSR_TEMP
LIBOBJS
LTLIBOBJS'
ac_subst_files=''
      ac_precious_vars='build_alias
host_alias
target_alias
CC
CFLAGS
LDFLAGS
LIBS
CPPFLAGS
CXX
CXXFLAGS
CCC
XMKMF
CPP
force_arch'


# Initialize some variables set by options.
ac_init_help=
ac_init_version=false
# The variables have the same names as the options, with
# dashes changed to underlines.
cache_file=/dev/null
exec_prefix=NONE
no_create=
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
verbose=
x_includes=NONE
x_libraries=NONE

# Installation directory options.
# These are left unexpanded so users can "make install exec_prefix=/foo"
# and all the variables that are supposed to be based on exec_prefix
# by default will actually change.
# Use braces instead of parens because sh, perl, etc. also accept them.
# (The list follows the same order as the GNU Coding Standards.)
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datarootdir='${prefix}/share'
datadir='${datarootdir}'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
includedir='${prefix}/include'
oldincludedir='/usr/include'
docdir='${datarootdir}/doc/${PACKAGE}'
infodir='${datarootdir}/info'
htmldir='${docdir}'
dvidir='${docdir}'
pdfdir='${docdir}'
psdir='${docdir}'
libdir='${exec_prefix}/lib'
localedir='${datarootdir}/locale'
mandir='${datarootdir}/man'

ac_prev=
ac_dashdash=
for ac_option
do
  # If the previous option needs an argument, assign it.
  if test -n "$ac_prev"; then
    eval $ac_prev=\$ac_option
    ac_prev=
    continue
  fi

  case $ac_option in
  *=*)	ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
  *)	ac_optarg=yes ;;
  esac

  # Accept the important Cygnus configure options, so we can diagnose typos.

  case $ac_dashdash$ac_option in
  --)
    ac_dashdash=yes ;;

  -bindir | --bindir | --bindi | --bind | --bin | --bi)
    ac_prev=bindir ;;
  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
    bindir=$ac_optarg ;;

  -build | --build | --buil | --bui | --bu)
    ac_prev=build_alias ;;
  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
    build_alias=$ac_optarg ;;

  -cache-file | --cache-file | --cache-fil | --cache-fi \
  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
    ac_prev=cache_file ;;
  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
    cache_file=$ac_optarg ;;

  --config-cache | -C)
    cache_file=config.cache ;;

  -datadir | --datadir | --datadi | --datad)
    ac_prev=datadir ;;
  -datadir=* | --datadir=* | --datadi=* | --datad=*)
    datadir=$ac_optarg ;;

  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
  | --dataroo | --dataro | --datar)
    ac_prev=datarootdir ;;
  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
    datarootdir=$ac_optarg ;;

  -disable-* | --disable-*)
    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
    # Reject names that are not valid shell variable names.
    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
   { (exit 1); exit 1; }; }
    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
    eval enable_$ac_feature=no ;;

  -docdir | --docdir | --docdi | --doc | --do)
    ac_prev=docdir ;;
  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
    docdir=$ac_optarg ;;

  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
    ac_prev=dvidir ;;
  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
    dvidir=$ac_optarg ;;

  -enable-* | --enable-*)
    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
    # Reject names that are not valid shell variable names.
    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
   { (exit 1); exit 1; }; }
    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
    eval enable_$ac_feature=\$ac_optarg ;;

  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
  | --exec | --exe | --ex)
    ac_prev=exec_prefix ;;
  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
  | --exec=* | --exe=* | --ex=*)
    exec_prefix=$ac_optarg ;;

  -gas | --gas | --ga | --g)
    # Obsolete; use --with-gas.
    with_gas=yes ;;

  -help | --help | --hel | --he | -h)
    ac_init_help=long ;;
  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
    ac_init_help=recursive ;;
  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
    ac_init_help=short ;;

  -host | --host | --hos | --ho)
    ac_prev=host_alias ;;
  -host=* | --host=* | --hos=* | --ho=*)
    host_alias=$ac_optarg ;;

  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
    ac_prev=htmldir ;;
  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
  | --ht=*)
    htmldir=$ac_optarg ;;

  -includedir | --includedir | --includedi | --included | --include \
  | --includ | --inclu | --incl | --inc)
    ac_prev=includedir ;;
  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
  | --includ=* | --inclu=* | --incl=* | --inc=*)
    includedir=$ac_optarg ;;

  -infodir | --infodir | --infodi | --infod | --info | --inf)
    ac_prev=infodir ;;
  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
    infodir=$ac_optarg ;;

  -libdir | --libdir | --libdi | --libd)
    ac_prev=libdir ;;
  -libdir=* | --libdir=* | --libdi=* | --libd=*)
    libdir=$ac_optarg ;;

  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
  | --libexe | --libex | --libe)
    ac_prev=libexecdir ;;
  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
  | --libexe=* | --libex=* | --libe=*)
    libexecdir=$ac_optarg ;;

  -localedir | --localedir | --localedi | --localed | --locale)
    ac_prev=localedir ;;
  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
    localedir=$ac_optarg ;;

  -localstatedir | --localstatedir | --localstatedi | --localstated \
  | --localstate | --localstat | --localsta | --localst | --locals)
    ac_prev=localstatedir ;;
  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
    localstatedir=$ac_optarg ;;

  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
    ac_prev=mandir ;;
  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
    mandir=$ac_optarg ;;

  -nfp | --nfp | --nf)
    # Obsolete; use --without-fp.
    with_fp=no ;;

  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c | -n)
    no_create=yes ;;

  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
    no_recursion=yes ;;

  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
  | --oldin | --oldi | --old | --ol | --o)
    ac_prev=oldincludedir ;;
  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
    oldincludedir=$ac_optarg ;;

  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
    ac_prev=prefix ;;
  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
    prefix=$ac_optarg ;;

  -program-prefix | --program-prefix | --program-prefi | --program-pref \
  | --program-pre | --program-pr | --program-p)
    ac_prev=program_prefix ;;
  -program-prefix=* | --program-prefix=* | --program-prefi=* \
  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
    program_prefix=$ac_optarg ;;

  -program-suffix | --program-suffix | --program-suffi | --program-suff \
  | --program-suf | --program-su | --program-s)
    ac_prev=program_suffix ;;
  -program-suffix=* | --program-suffix=* | --program-suffi=* \
  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
    program_suffix=$ac_optarg ;;

  -program-transform-name | --program-transform-name \
  | --program-transform-nam | --program-transform-na \
  | --program-transform-n | --program-transform- \
  | --program-transform | --program-transfor \
  | --program-transfo | --program-transf \
  | --program-trans | --program-tran \
  | --progr-tra | --program-tr | --program-t)
    ac_prev=program_transform_name ;;
  -program-transform-name=* | --program-transform-name=* \
  | --program-transform-nam=* | --program-transform-na=* \
  | --program-transform-n=* | --program-transform-=* \
  | --program-transform=* | --program-transfor=* \
  | --program-transfo=* | --program-transf=* \
  | --program-trans=* | --program-tran=* \
  | --progr-tra=* | --program-tr=* | --program-t=*)
    program_transform_name=$ac_optarg ;;

  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
    ac_prev=pdfdir ;;
  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
    pdfdir=$ac_optarg ;;

  -psdir | --psdir | --psdi | --psd | --ps)
    ac_prev=psdir ;;
  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
    psdir=$ac_optarg ;;

  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
  | -silent | --silent | --silen | --sile | --sil)
    silent=yes ;;

  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
    ac_prev=sbindir ;;
  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
  | --sbi=* | --sb=*)
    sbindir=$ac_optarg ;;

  -sharedstatedir | --sharedstatedir | --sharedstatedi \
  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
  | --sharedst | --shareds | --shared | --share | --shar \
  | --sha | --sh)
    ac_prev=sharedstatedir ;;
  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
  | --sha=* | --sh=*)
    sharedstatedir=$ac_optarg ;;

  -site | --site | --sit)
    ac_prev=site ;;
  -site=* | --site=* | --sit=*)
    site=$ac_optarg ;;

  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
    ac_prev=srcdir ;;
  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
    srcdir=$ac_optarg ;;

  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
  | --syscon | --sysco | --sysc | --sys | --sy)
    ac_prev=sysconfdir ;;
  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
    sysconfdir=$ac_optarg ;;

  -target | --target | --targe | --targ | --tar | --ta | --t)
    ac_prev=target_alias ;;
  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
    target_alias=$ac_optarg ;;

  -v | -verbose | --verbose | --verbos | --verbo | --verb)
    verbose=yes ;;

  -version | --version | --versio | --versi | --vers | -V)
    ac_init_version=: ;;

  -with-* | --with-*)
    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
    # Reject names that are not valid shell variable names.
    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
      { echo "$as_me: error: invalid package name: $ac_package" >&2
   { (exit 1); exit 1; }; }
    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
    eval with_$ac_package=\$ac_optarg ;;

  -without-* | --without-*)
    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
    # Reject names that are not valid shell variable names.
    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
      { echo "$as_me: error: invalid package name: $ac_package" >&2
   { (exit 1); exit 1; }; }
    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
    eval with_$ac_package=no ;;

  --x)
    # Obsolete; use --with-x.
    with_x=yes ;;

  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
  | --x-incl | --x-inc | --x-in | --x-i)
    ac_prev=x_includes ;;
  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
    x_includes=$ac_optarg ;;

  -x-libraries | --x-libraries | --x-librarie | --x-librari \
  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
    ac_prev=x_libraries ;;
  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
    x_libraries=$ac_optarg ;;

  -*) { echo "$as_me: error: unrecognized option: $ac_option
Try \`$0 --help' for more information." >&2
   { (exit 1); exit 1; }; }
    ;;

  *=*)
    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
    # Reject names that are not valid shell variable names.
    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
   { (exit 1); exit 1; }; }
    eval $ac_envvar=\$ac_optarg
    export $ac_envvar ;;

  *)
    # FIXME: should be removed in autoconf 3.0.
    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
    ;;

  esac
done

if test -n "$ac_prev"; then
  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
  { echo "$as_me: error: missing argument to $ac_option" >&2
   { (exit 1); exit 1; }; }
fi

# Be sure to have absolute directory names.
for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
		datadir sysconfdir sharedstatedir localstatedir includedir \
		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
		libdir localedir mandir
do
  eval ac_val=\$$ac_var
  case $ac_val in
    [\\/$]* | ?:[\\/]* )  continue;;
    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
  esac
  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
   { (exit 1); exit 1; }; }
done

# There might be people who depend on the old broken behavior: `$host'
# used to hold the argument of --host etc.
# FIXME: To remove some day.
build=$build_alias
host=$host_alias
target=$target_alias

# FIXME: To remove some day.
if test "x$host_alias" != x; then
  if test "x$build_alias" = x; then
    cross_compiling=maybe
    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used." >&2
  elif test "x$build_alias" != "x$host_alias"; then
    cross_compiling=yes
  fi
fi

ac_tool_prefix=
test -n "$host_alias" && ac_tool_prefix=$host_alias-

test "$silent" = yes && exec 6>/dev/null


ac_pwd=`pwd` && test -n "$ac_pwd" &&
ac_ls_di=`ls -di .` &&
ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
  { echo "$as_me: error: Working directory cannot be determined" >&2
   { (exit 1); exit 1; }; }
test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
  { echo "$as_me: error: pwd does not report name of working directory" >&2
   { (exit 1); exit 1; }; }


# Find the source files, if location was not specified.
if test -z "$srcdir"; then
  ac_srcdir_defaulted=yes
  # Try the directory containing this script, then the parent directory.
  ac_confdir=`$as_dirname -- "$0" ||
$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$0" : 'X\(//\)[^/]' \| \
	 X"$0" : 'X\(//\)$' \| \
	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$0" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)[^/].*/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`
  srcdir=$ac_confdir
  if test ! -r "$srcdir/$ac_unique_file"; then
    srcdir=..
  fi
else
  ac_srcdir_defaulted=no
fi
if test ! -r "$srcdir/$ac_unique_file"; then
  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
  { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
   { (exit 1); exit 1; }; }
fi
ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
ac_abs_confdir=`(
	cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
   { (exit 1); exit 1; }; }
	pwd)`
# When building in place, set srcdir=.
if test "$ac_abs_confdir" = "$ac_pwd"; then
  srcdir=.
fi
# Remove unnecessary trailing slashes from srcdir.
# Double slashes in file names in object file debugging info
# mess up M-x gdb in Emacs.
case $srcdir in
*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
esac
for ac_var in $ac_precious_vars; do
  eval ac_env_${ac_var}_set=\${${ac_var}+set}
  eval ac_env_${ac_var}_value=\$${ac_var}
  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
  eval ac_cv_env_${ac_var}_value=\$${ac_var}
done

#
# Report the --help message.
#
if test "$ac_init_help" = "long"; then
  # Omit some internal or obsolete options to make the list less imposing.
  # This message is too long to be a string in the A/UX 3.1 sh.
  cat <<_ACEOF
\`configure' configures this package to adapt to many kinds of systems.

Usage: $0 [OPTION]... [VAR=VALUE]...

To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE.  See below for descriptions of some of the useful variables.

Defaults for the options are specified in brackets.

Configuration:
  -h, --help              display this help and exit
      --help=short        display options specific to this package
      --help=recursive    display the short help of all the included packages
  -V, --version           display version information and exit
  -q, --quiet, --silent   do not print \`checking...' messages
      --cache-file=FILE   cache test results in FILE [disabled]
  -C, --config-cache      alias for \`--cache-file=config.cache'
  -n, --no-create         do not create output files
      --srcdir=DIR        find the sources in DIR [configure dir or \`..']

Installation directories:
  --prefix=PREFIX         install architecture-independent files in PREFIX
			  [$ac_default_prefix]
  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
			  [PREFIX]

By default, \`make install' will install all the files in
\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
an installation prefix other than \`$ac_default_prefix' using \`--prefix',
for instance \`--prefix=\$HOME'.

For better control, use the options below.

Fine tuning of the installation directories:
  --bindir=DIR           user executables [EPREFIX/bin]
  --sbindir=DIR          system admin executables [EPREFIX/sbin]
  --libexecdir=DIR       program executables [EPREFIX/libexec]
  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
  --libdir=DIR           object code libraries [EPREFIX/lib]
  --includedir=DIR       C header files [PREFIX/include]
  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
  --datarootdir=DIR      read-only arch.-independent data root [PREFIX/share]
  --datadir=DIR          read-only architecture-independent data [DATAROOTDIR]
  --infodir=DIR          info documentation [DATAROOTDIR/info]
  --localedir=DIR        locale-dependent data [DATAROOTDIR/locale]
  --mandir=DIR           man documentation [DATAROOTDIR/man]
  --docdir=DIR           documentation root [DATAROOTDIR/doc/PACKAGE]
  --htmldir=DIR          html documentation [DOCDIR]
  --dvidir=DIR           dvi documentation [DOCDIR]
  --pdfdir=DIR           pdf documentation [DOCDIR]
  --psdir=DIR            ps documentation [DOCDIR]
_ACEOF

  cat <<\_ACEOF

X features:
  --x-includes=DIR    X include files are in DIR
  --x-libraries=DIR   X library files are in DIR

System types:
  --build=BUILD     configure for building on BUILD [guessed]
  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
  --target=TARGET   configure for building compilers for TARGET [HOST]
_ACEOF
fi

if test -n "$ac_init_help"; then

  cat <<\_ACEOF

Optional Features:
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
  --disable-sdltest       Do not try to compile and run a test SDL program
  --disable-libpng        Build without libpng support
  --disable-debugger      Build without the zsnes debugger
  --enable-libao          Build with libao support
  --disable-opengl        Build without OpenGL support
  --disable-jma           Build without JMA support
  --disable-cpucheck      Do not try to autodetect cpu architecture
  --enable-debug          Build GDB friendly binary (zsnesd)
  --enable-release        Build ultra-optimized release binary (zsnes)

Optional Packages:
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --with-nasm-prefix=PFX  Prefix where nasm is installed (optional)
  --with-zconf-path=PATH  Path where ZSNES looks for zsnesl.cfg (default is .zsnes)
  --with-sdl-prefix=PFX   Prefix where SDL is installed (optional)
  --with-sdl-exec-prefix=PFX Exec prefix where SDL is installed (optional)
  --with-zlib-prefix=PFX  Prefix where zlib is installed (optional)
  --with-libpng-prefix=PFX Prefix where libpng is installed (optional)
  --with-opengl-prefix=PFX Prefix where OpenGL is installed (optional)
  --with-x                use the X Window System

Some influential environment variables:
  CC          C compiler command
  CFLAGS      C compiler flags
  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
              nonstandard directory <lib dir>
  LIBS        libraries to pass to the linker, e.g. -l<library>
  CPPFLAGS    C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
              you have headers in a nonstandard directory <include dir>
  CXX         C++ compiler command
  CXXFLAGS    C++ compiler flags
  XMKMF       Path to xmkmf, Makefile generator for X Window System
  CPP         C preprocessor
  force_arch  Force architecture to optimize GCC/G++ for

Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.

_ACEOF
ac_status=$?
fi

if test "$ac_init_help" = "recursive"; then
  # If there are subdirs, report their specific --help.
  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
    test -d "$ac_dir" || continue
    ac_builddir=.

case "$ac_dir" in
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
*)
  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
  # A ".." for each directory in $ac_dir_suffix.
  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
  case $ac_top_builddir_sub in
  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
  esac ;;
esac
ac_abs_top_builddir=$ac_pwd
ac_abs_builddir=$ac_pwd$ac_dir_suffix
# for backward compatibility:
ac_top_builddir=$ac_top_build_prefix

case $srcdir in
  .)  # We are building in place.
    ac_srcdir=.
    ac_top_srcdir=$ac_top_builddir_sub
    ac_abs_top_srcdir=$ac_pwd ;;
  [\\/]* | ?:[\\/]* )  # Absolute name.
    ac_srcdir=$srcdir$ac_dir_suffix;
    ac_top_srcdir=$srcdir
    ac_abs_top_srcdir=$srcdir ;;
  *) # Relative name.
    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
    ac_top_srcdir=$ac_top_build_prefix$srcdir
    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix

    cd "$ac_dir" || { ac_status=$?; continue; }
    # Check for guested configure.
    if test -f "$ac_srcdir/configure.gnu"; then
      echo &&
      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
    elif test -f "$ac_srcdir/configure"; then
      echo &&
      $SHELL "$ac_srcdir/configure" --help=recursive
    else
      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
    fi || ac_status=$?
    cd "$ac_pwd" || { ac_status=$?; break; }
  done
fi

test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
  cat <<\_ACEOF
configure
generated by GNU Autoconf 2.61

Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
  exit
fi
cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by $as_me, which was
generated by GNU Autoconf 2.61.  Invocation command line was

  $ $0 $@

_ACEOF
exec 5>>config.log
{
cat <<_ASUNAME
## --------- ##
## Platform. ##
## --------- ##

hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
uname -m = `(uname -m) 2>/dev/null || echo unknown`
uname -r = `(uname -r) 2>/dev/null || echo unknown`
uname -s = `(uname -s) 2>/dev/null || echo unknown`
uname -v = `(uname -v) 2>/dev/null || echo unknown`

/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`

/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`

_ASUNAME

as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  echo "PATH: $as_dir"
done
IFS=$as_save_IFS

} >&5

cat >&5 <<_ACEOF


## ----------- ##
## Core tests. ##
## ----------- ##

_ACEOF


# Keep a trace of the command line.
# Strip out --no-create and --no-recursion so they do not pile up.
# Strip out --silent because we don't want to record it for future runs.
# Also quote any args containing shell meta-characters.
# Make two passes to allow for proper duplicate-argument suppression.
ac_configure_args=
ac_configure_args0=
ac_configure_args1=
ac_must_keep_next=false
for ac_pass in 1 2
do
  for ac_arg
  do
    case $ac_arg in
    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
    | -silent | --silent | --silen | --sile | --sil)
      continue ;;
    *\'*)
      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
    esac
    case $ac_pass in
    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
    2)
      ac_configure_args1="$ac_configure_args1 '$ac_arg'"
      if test $ac_must_keep_next = true; then
	ac_must_keep_next=false # Got value, back to normal.
      else
	case $ac_arg in
	  *=* | --config-cache | -C | -disable-* | --disable-* \
	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
	  | -with-* | --with-* | -without-* | --without-* | --x)
	    case "$ac_configure_args0 " in
	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
	    esac
	    ;;
	  -* ) ac_must_keep_next=true ;;
	esac
      fi
      ac_configure_args="$ac_configure_args '$ac_arg'"
      ;;
    esac
  done
done
$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }

# When interrupted or exit'd, cleanup temporary files, and complete
# config.log.  We remove comments because anyway the quotes in there
# would cause problems or look ugly.
# WARNING: Use '\'' to represent an apostrophe within the trap.
# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
trap 'exit_status=$?
  # Save into config.log some information that might help in debugging.
  {
    echo

    cat <<\_ASBOX
## ---------------- ##
## Cache variables. ##
## ---------------- ##
_ASBOX
    echo
    # The following way of writing the cache mishandles newlines in values,
(
  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
    eval ac_val=\$$ac_var
    case $ac_val in #(
    *${as_nl}*)
      case $ac_var in #(
      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
      esac
      case $ac_var in #(
      _ | IFS | as_nl) ;; #(
      *) $as_unset $ac_var ;;
      esac ;;
    esac
  done
  (set) 2>&1 |
    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
    *${as_nl}ac_space=\ *)
      sed -n \
	"s/'\''/'\''\\\\'\'''\''/g;
	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
      ;; #(
    *)
      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
      ;;
    esac |
    sort
)
    echo

    cat <<\_ASBOX
## ----------------- ##
## Output variables. ##
## ----------------- ##
_ASBOX
    echo
    for ac_var in $ac_subst_vars
    do
      eval ac_val=\$$ac_var
      case $ac_val in
      *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
      esac
      echo "$ac_var='\''$ac_val'\''"
    done | sort
    echo

    if test -n "$ac_subst_files"; then
      cat <<\_ASBOX
## ------------------- ##
## File substitutions. ##
## ------------------- ##
_ASBOX
      echo
      for ac_var in $ac_subst_files
      do
	eval ac_val=\$$ac_var
	case $ac_val in
	*\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
	esac
	echo "$ac_var='\''$ac_val'\''"
      done | sort
      echo
    fi

    if test -s confdefs.h; then
      cat <<\_ASBOX
## ----------- ##
## confdefs.h. ##
## ----------- ##
_ASBOX
      echo
      cat confdefs.h
      echo
    fi
    test "$ac_signal" != 0 &&
      echo "$as_me: caught signal $ac_signal"
    echo "$as_me: exit $exit_status"
  } >&5
  rm -f core *.core core.conftest.* &&
    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
    exit $exit_status
' 0
for ac_signal in 1 2 13 15; do
  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
done
ac_signal=0

# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -f -r conftest* confdefs.h

# Predefined preprocessor variables.

cat >>confdefs.h <<_ACEOF
#define PACKAGE_NAME "$PACKAGE_NAME"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define PACKAGE_VERSION "$PACKAGE_VERSION"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define PACKAGE_STRING "$PACKAGE_STRING"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
_ACEOF


# Let the site file select an alternate cache file if it wants to.
# Prefer explicitly selected file to automatically selected ones.
if test -n "$CONFIG_SITE"; then
  set x "$CONFIG_SITE"
elif test "x$prefix" != xNONE; then
  set x "$prefix/share/config.site" "$prefix/etc/config.site"
else
  set x "$ac_default_prefix/share/config.site" \
	"$ac_default_prefix/etc/config.site"
fi
shift
for ac_site_file
do
  if test -r "$ac_site_file"; then
    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
echo "$as_me: loading site script $ac_site_file" >&6;}
    sed 's/^/| /' "$ac_site_file" >&5
    . "$ac_site_file"
  fi
done

if test -r "$cache_file"; then
  # Some versions of bash will fail to source /dev/null (special
  # files actually), so we avoid doing that.
  if test -f "$cache_file"; then
    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
echo "$as_me: loading cache $cache_file" >&6;}
    case $cache_file in
      [\\/]* | ?:[\\/]* ) . "$cache_file";;
      *)                      . "./$cache_file";;
    esac
  fi
else
  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
echo "$as_me: creating cache $cache_file" >&6;}
  >$cache_file
fi

# Check that the precious variables saved in the cache have kept the same
# value.
ac_cache_corrupted=false
for ac_var in $ac_precious_vars; do
  eval ac_old_set=\$ac_cv_env_${ac_var}_set
  eval ac_new_set=\$ac_env_${ac_var}_set
  eval ac_old_val=\$ac_cv_env_${ac_var}_value
  eval ac_new_val=\$ac_env_${ac_var}_value
  case $ac_old_set,$ac_new_set in
    set,)
      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
      ac_cache_corrupted=: ;;
    ,set)
      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
      ac_cache_corrupted=: ;;
    ,);;
    *)
      if test "x$ac_old_val" != "x$ac_new_val"; then
	{ echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
	{ echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
echo "$as_me:   former value:  $ac_old_val" >&2;}
	{ echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
echo "$as_me:   current value: $ac_new_val" >&2;}
	ac_cache_corrupted=:
      fi;;
  esac
  # Pass precious variables to config.status.
  if test "$ac_new_set" = set; then
    case $ac_new_val in
    *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
    *) ac_arg=$ac_var=$ac_new_val ;;
    esac
    case " $ac_configure_args " in
      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
    esac
  fi
done
if $ac_cache_corrupted; then
  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
echo "$as_me: error: changes in the environment can compromise the build" >&2;}
  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
   { (exit 1); exit 1; }; }
fi

















ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu




ac_config_headers="$ac_config_headers config.h"


VERSION=1.51

CFLAGS="$CFLAGS -pipe -I. -I/usr/local/include -I/usr/include"

LDFLAGS="$LDFLAGS -L/usr/local/lib -L/usr/lib"

ac_aux_dir=
for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
  if test -f "$ac_dir/install-sh"; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install-sh -c"
    break
  elif test -f "$ac_dir/install.sh"; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install.sh -c"
    break
  elif test -f "$ac_dir/shtool"; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/shtool install -c"
    break
  fi
done
if test -z "$ac_aux_dir"; then
  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
   { (exit 1); exit 1; }; }
fi

# These three variables are undocumented and unsupported,
# and are intended to be withdrawn in a future Autoconf release.
# They can cause serious problems if a builder's source tree is in a directory
# whose full name contains unusual characters.
ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.


# Make sure we can run config.sub.
$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
  { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
   { (exit 1); exit 1; }; }

{ echo "$as_me:$LINENO: checking build system type" >&5
echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
if test "${ac_cv_build+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_build_alias=$build_alias
test "x$ac_build_alias" = x &&
  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
test "x$ac_build_alias" = x &&
  { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
   { (exit 1); exit 1; }; }
ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
  { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
   { (exit 1); exit 1; }; }

fi
{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
echo "${ECHO_T}$ac_cv_build" >&6; }
case $ac_cv_build in
*-*-*) ;;
*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
echo "$as_me: error: invalid value of canonical build" >&2;}
   { (exit 1); exit 1; }; };;
esac
build=$ac_cv_build
ac_save_IFS=$IFS; IFS='-'
set x $ac_cv_build
shift
build_cpu=$1
build_vendor=$2
shift; shift
# Remember, the first character of IFS is used to create $*,
# except with old shells:
build_os=$*
IFS=$ac_save_IFS
case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac


{ echo "$as_me:$LINENO: checking host system type" >&5
echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
if test "${ac_cv_host+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test "x$host_alias" = x; then
  ac_cv_host=$ac_cv_build
else
  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
    { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
   { (exit 1); exit 1; }; }
fi

fi
{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5
echo "${ECHO_T}$ac_cv_host" >&6; }
case $ac_cv_host in
*-*-*) ;;
*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
echo "$as_me: error: invalid value of canonical host" >&2;}
   { (exit 1); exit 1; }; };;
esac
host=$ac_cv_host
ac_save_IFS=$IFS; IFS='-'
set x $ac_cv_host
shift
host_cpu=$1
host_vendor=$2
shift; shift
# Remember, the first character of IFS is used to create $*,
# except with old shells:
host_os=$*
IFS=$ac_save_IFS
case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac


{ echo "$as_me:$LINENO: checking target system type" >&5
echo $ECHO_N "checking target system type... $ECHO_C" >&6; }
if test "${ac_cv_target+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test "x$target_alias" = x; then
  ac_cv_target=$ac_cv_host
else
  ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
    { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5
echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;}
   { (exit 1); exit 1; }; }
fi

fi
{ echo "$as_me:$LINENO: result: $ac_cv_target" >&5
echo "${ECHO_T}$ac_cv_target" >&6; }
case $ac_cv_target in
*-*-*) ;;
*) { { echo "$as_me:$LINENO: error: invalid value of canonical target" >&5
echo "$as_me: error: invalid value of canonical target" >&2;}
   { (exit 1); exit 1; }; };;
esac
target=$ac_cv_target
ac_save_IFS=$IFS; IFS='-'
set x $ac_cv_target
shift
target_cpu=$1
target_vendor=$2
shift; shift
# Remember, the first character of IFS is used to create $*,
# except with old shells:
target_os=$*
IFS=$ac_save_IFS
case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac


# The aliases save the names the user supplied, while $host etc.
# will get canonicalized.
test -n "$target_alias" &&
  test "$program_prefix$program_suffix$program_transform_name" = \
    NONENONEs,x,x, &&
  program_prefix=${target_alias}-
# Find a good install program.  We prefer a C program (faster),
# so one script is as good as another.  But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AmigaOS /C/install, which installs bootblocks on floppy discs
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# OS/2's system install, which has a completely different semantic
# ./install, which can be erroneously created by make from ./install.sh.
{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
if test -z "$INSTALL"; then
if test "${ac_cv_path_install+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  # Account for people who put trailing slashes in PATH elements.
case $as_dir/ in
  ./ | .// | /cC/* | \
  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
  /usr/ucb/* ) ;;
  *)
    # OSF1 and SCO ODT 3.0 have their own names for install.
    # Don't use installbsd from OSF since it installs stuff as root
    # by default.
    for ac_prog in ginstall scoinst install; do
      for ac_exec_ext in '' $ac_executable_extensions; do
	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
	  if test $ac_prog = install &&
	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
	    # AIX install.  It has an incompatible calling convention.
	    :
	  elif test $ac_prog = install &&
	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
	    # program-specific install script used by HP pwplus--don't use.
	    :
	  else
	    ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
	    break 3
	  fi
	fi
      done
    done
    ;;
esac
done
IFS=$as_save_IFS


fi
  if test "${ac_cv_path_install+set}" = set; then
    INSTALL=$ac_cv_path_install
  else
    # As a last resort, use the slow shell script.  Don't cache a
    # value for INSTALL within a source directory, because that will
    # break other packages using the cache if that directory is
    # removed, or if the value is a relative name.
    INSTALL=$ac_install_sh
  fi
fi
{ echo "$as_me:$LINENO: result: $INSTALL" >&5
echo "${ECHO_T}$INSTALL" >&6; }

# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'

test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'

test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'

ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
if test -n "$ac_tool_prefix"; then
  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
set dummy ${ac_tool_prefix}gcc; ac_word=$2
{ echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_CC+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_exec_ext in '' $ac_executable_extensions; do
  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
    ac_cv_prog_CC="${ac_tool_prefix}gcc"
    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
done
IFS=$as_save_IFS

fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
  { echo "$as_me:$LINENO: result: $CC" >&5
echo "${ECHO_T}$CC" >&6; }
else
  { echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi


fi
if test -z "$ac_cv_prog_CC"; then
  ac_ct_CC=$CC
  # Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
{ echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$ac_ct_CC"; then
  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_exec_ext in '' $ac_executable_extensions; do
  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
    ac_cv_prog_ac_ct_CC="gcc"
    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
done
IFS=$as_save_IFS

fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
  { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
echo "${ECHO_T}$ac_ct_CC" >&6; }
else
  { echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi

  if test "x$ac_ct_CC" = x; then
    CC=""
  else
    case $cross_compiling:$ac_tool_warned in
yes:)
{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
whose name does not start with the host triplet.  If you think this
configuration is useful to you, please write to autoconf@xxxxxxx." >&5
echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
whose name does not start with the host triplet.  If you think this
configuration is useful to you, please write to autoconf@xxxxxxx." >&2;}
ac_tool_warned=yes ;;
esac
    CC=$ac_ct_CC
  fi
else
  CC="$ac_cv_prog_CC"
fi

if test -z "$CC"; then
          if test -n "$ac_tool_prefix"; then
    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
set dummy ${ac_tool_prefix}cc; ac_word=$2
{ echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_CC+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_exec_ext in '' $ac_executable_extensions; do
  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
    ac_cv_prog_CC="${ac_tool_prefix}cc"
    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
done
IFS=$as_save_IFS

fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
  { echo "$as_me:$LINENO: result: $CC" >&5
echo "${ECHO_T}$CC" >&6; }
else
  { echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi


  fi
fi
if test -z "$CC"; then
  # Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
{ echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_CC+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  ac_prog_rejected=no
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_exec_ext in '' $ac_executable_extensions; do
  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
       ac_prog_rejected=yes
       continue
     fi
    ac_cv_prog_CC="cc"
    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
done
IFS=$as_save_IFS

if test $ac_prog_rejected = yes; then
  # We found a bogon in the path, so make sure we never use it.
  set dummy $ac_cv_prog_CC
  shift
  if test $# != 0; then
    # We chose a different compiler from the bogus one.
    # However, it has the same basename, so the bogon will be chosen
    # first if we set CC to just the basename; use the full file name.
    shift
    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
  fi
fi
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
  { echo "$as_me:$LINENO: result: $CC" >&5
echo "${ECHO_T}$CC" >&6; }
else
  { echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi


fi
if test -z "$CC"; then
  if test -n "$ac_tool_prefix"; then
  for ac_prog in cl.exe
  do
    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
{ echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_CC+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_exec_ext in '' $ac_executable_extensions; do
  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
done
IFS=$as_save_IFS

fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
  { echo "$as_me:$LINENO: result: $CC" >&5
echo "${ECHO_T}$CC" >&6; }
else
  { echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi


    test -n "$CC" && break
  done
fi
if test -z "$CC"; then
  ac_ct_CC=$CC
  for ac_prog in cl.exe
do
  # Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
{ echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$ac_ct_CC"; then
  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_exec_ext in '' $ac_executable_extensions; do
  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
    ac_cv_prog_ac_ct_CC="$ac_prog"
    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
done
IFS=$as_save_IFS

fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
  { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
echo "${ECHO_T}$ac_ct_CC" >&6; }
else
  { echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi


  test -n "$ac_ct_CC" && break
done

  if test "x$ac_ct_CC" = x; then
    CC=""
  else
    case $cross_compiling:$ac_tool_warned in
yes:)
{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
whose name does not start with the host triplet.  If you think this
configuration is useful to you, please write to autoconf@xxxxxxx." >&5
echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
whose name does not start with the host triplet.  If you think this
configuration is useful to you, please write to autoconf@xxxxxxx." >&2;}
ac_tool_warned=yes ;;
esac
    CC=$ac_ct_CC
  fi
fi

fi


test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
See \`config.log' for more details." >&5
echo "$as_me: error: no acceptable C compiler found in \$PATH
See \`config.log' for more details." >&2;}
   { (exit 1); exit 1; }; }

# Provide some information about the compiler.
echo "$as_me:$LINENO: checking for C compiler version" >&5
ac_compiler=`set X $ac_compile; echo $2`
{ (ac_try="$ac_compiler --version >&5"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_compiler --version >&5") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }
{ (ac_try="$ac_compiler -v >&5"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_compiler -v >&5") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }
{ (ac_try="$ac_compiler -V >&5"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_compiler -V >&5") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }

cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */

int
main ()
{

  ;
  return 0;
}
_ACEOF
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files a.out a.exe b.out"
# Try to create an executable without -o first, disregard a.out.
# It will help us diagnose broken compilers, and finding out an intuition
# of exeext.
{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
#
# List of possible output files, starting from the most likely.
# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
# only as a last resort.  b.out is created by i960 compilers.
ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
#
# The IRIX 6 linker writes into existing files which may not be
# executable, retaining their permissions.  Remove them first so a
# subsequent execution test works.
ac_rmfiles=
for ac_file in $ac_files
do
  case $ac_file in
    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
  esac
done
rm -f $ac_rmfiles

if { (ac_try="$ac_link_default"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_link_default") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; then
  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
# in a Makefile.  We should not override ac_cv_exeext if it was cached,
# so that the user can short-circuit this test for compilers unknown to
# Autoconf.
for ac_file in $ac_files ''
do
  test -f "$ac_file" || continue
  case $ac_file in
    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
	;;
    [ab].out )
	# We found the default executable, but exeext='' is most
	# certainly right.
	break;;
    *.* )
        if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
	then :; else
	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
	fi
	# We set ac_cv_exeext here because the later test for it is not
	# safe: cross compilers may not add the suffix if given an `-o'
	# argument, so we may need to know it at that point already.
	# Even if this section looks crufty: it has the advantage of
	# actually working.
	break;;
    * )
	break;;
  esac
done
test "$ac_cv_exeext" = no && ac_cv_exeext=

else
  ac_file=''
fi

{ echo "$as_me:$LINENO: result: $ac_file" >&5
echo "${ECHO_T}$ac_file" >&6; }
if test -z "$ac_file"; then
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
See \`config.log' for more details." >&5
echo "$as_me: error: C compiler cannot create executables
See \`config.log' for more details." >&2;}
   { (exit 77); exit 77; }; }
fi

ac_exeext=$ac_cv_exeext

# Check that the compiler produces executables we can run.  If not, either
# the compiler is broken, or we cross compile.
{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
# If not cross compiling, check that we can run a simple program.
if test "$cross_compiling" != yes; then
  if { ac_try='./$ac_file'
  { (case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_try") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
    cross_compiling=no
  else
    if test "$cross_compiling" = maybe; then
	cross_compiling=yes
    else
	{ { echo "$as_me:$LINENO: error: cannot run C compiled programs.
If you meant to cross compile, use \`--host'.
See \`config.log' for more details." >&5
echo "$as_me: error: cannot run C compiled programs.
If you meant to cross compile, use \`--host'.
See \`config.log' for more details." >&2;}
   { (exit 1); exit 1; }; }
    fi
  fi
fi
{ echo "$as_me:$LINENO: result: yes" >&5
echo "${ECHO_T}yes" >&6; }

rm -f a.out a.exe conftest$ac_cv_exeext b.out
ac_clean_files=$ac_clean_files_save
# Check that the compiler produces executables we can run.  If not, either
# the compiler is broken, or we cross compile.
{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
echo "${ECHO_T}$cross_compiling" >&6; }

{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
if { (ac_try="$ac_link"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_link") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; then
  # If both `conftest.exe' and `conftest' are `present' (well, observable)
# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
# work properly (i.e., refer to `conftest.exe'), while it won't with
# `rm'.
for ac_file in conftest.exe conftest conftest.*; do
  test -f "$ac_file" || continue
  case $ac_file in
    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
	  break;;
    * ) break;;
  esac
done
else
  { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
See \`config.log' for more details." >&5
echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
See \`config.log' for more details." >&2;}
   { (exit 1); exit 1; }; }
fi

rm -f conftest$ac_cv_exeext
{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
echo "${ECHO_T}$ac_cv_exeext" >&6; }

rm -f conftest.$ac_ext
EXEEXT=$ac_cv_exeext
ac_exeext=$EXEEXT
{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
if test "${ac_cv_objext+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */

int
main ()
{

  ;
  return 0;
}
_ACEOF
rm -f conftest.o conftest.obj
if { (ac_try="$ac_compile"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_compile") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; then
  for ac_file in conftest.o conftest.obj conftest.*; do
  test -f "$ac_file" || continue;
  case $ac_file in
    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
       break;;
  esac
done
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
See \`config.log' for more details." >&5
echo "$as_me: error: cannot compute suffix of object files: cannot compile
See \`config.log' for more details." >&2;}
   { (exit 1); exit 1; }; }
fi

rm -f conftest.$ac_cv_objext conftest.$ac_ext
fi
{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
echo "${ECHO_T}$ac_cv_objext" >&6; }
OBJEXT=$ac_cv_objext
ac_objext=$OBJEXT
{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
if test "${ac_cv_c_compiler_gnu+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */

int
main ()
{
#ifndef __GNUC__
       choke me
#endif

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_compile") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && {
	 test -z "$ac_c_werror_flag" ||
	 test ! -s conftest.err
       } && test -s conftest.$ac_objext; then
  ac_compiler_gnu=yes
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

	ac_compiler_gnu=no
fi

rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
ac_cv_c_compiler_gnu=$ac_compiler_gnu

fi
{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
GCC=`test $ac_compiler_gnu = yes && echo yes`
ac_test_CFLAGS=${CFLAGS+set}
ac_save_CFLAGS=$CFLAGS
{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
if test "${ac_cv_prog_cc_g+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_save_c_werror_flag=$ac_c_werror_flag
   ac_c_werror_flag=yes
   ac_cv_prog_cc_g=no
   CFLAGS="-g"
   cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */

int
main ()
{

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_compile") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && {
	 test -z "$ac_c_werror_flag" ||
	 test ! -s conftest.err
       } && test -s conftest.$ac_objext; then
  ac_cv_prog_cc_g=yes
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

	CFLAGS=""
      cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */

int
main ()
{

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_compile") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && {
	 test -z "$ac_c_werror_flag" ||
	 test ! -s conftest.err
       } && test -s conftest.$ac_objext; then
  :
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

	ac_c_werror_flag=$ac_save_c_werror_flag
	 CFLAGS="-g"
	 cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */

int
main ()
{

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_compile") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && {
	 test -z "$ac_c_werror_flag" ||
	 test ! -s conftest.err
       } && test -s conftest.$ac_objext; then
  ac_cv_prog_cc_g=yes
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5


fi

rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi

rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi

rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
   ac_c_werror_flag=$ac_save_c_werror_flag
fi
{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
if test "$ac_test_CFLAGS" = set; then
  CFLAGS=$ac_save_CFLAGS
elif test $ac_cv_prog_cc_g = yes; then
  if test "$GCC" = yes; then
    CFLAGS="-g -O2"
  else
    CFLAGS="-g"
  fi
else
  if test "$GCC" = yes; then
    CFLAGS="-O2"
  else
    CFLAGS=
  fi
fi
{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
if test "${ac_cv_prog_cc_c89+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_cv_prog_cc_c89=no
ac_save_CC=$CC
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
#include <stdarg.h>
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
struct buf { int x; };
FILE * (*rcsopen) (struct buf *, struct stat *, int);
static char *e (p, i)
     char **p;
     int i;
{
  return p[i];
}
static char *f (char * (*g) (char **, int), char **p, ...)
{
  char *s;
  va_list v;
  va_start (v,p);
  s = g (p, va_arg (v,int));
  va_end (v);
  return s;
}

/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
   function prototypes and stuff, but not '\xHH' hex character constants.
   These don't provoke an error unfortunately, instead are silently treated
   as 'x'.  The following induces an error, until -std is added to get
   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
   array size at least.  It's necessary to write '\x00'==0 to get something
   that's true only with -std.  */
int osf4_cc_array ['\x00' == 0 ? 1 : -1];

/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
   inside strings and character constants.  */
#define FOO(x) 'x'
int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];

int test (int i, double x);
struct s1 {int (*f) (int a);};
struct s2 {int (*f) (double a);};
int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
int argc;
char **argv;
int
main ()
{
return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
  ;
  return 0;
}
_ACEOF
for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
do
  CC="$ac_save_CC $ac_arg"
  rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_compile") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && {
	 test -z "$ac_c_werror_flag" ||
	 test ! -s conftest.err
       } && test -s conftest.$ac_objext; then
  ac_cv_prog_cc_c89=$ac_arg
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5


fi

rm -f core conftest.err conftest.$ac_objext
  test "x$ac_cv_prog_cc_c89" != "xno" && break
done
rm -f conftest.$ac_ext
CC=$ac_save_CC

fi
# AC_CACHE_VAL
case "x$ac_cv_prog_cc_c89" in
  x)
    { echo "$as_me:$LINENO: result: none needed" >&5
echo "${ECHO_T}none needed" >&6; } ;;
  xno)
    { echo "$as_me:$LINENO: result: unsupported" >&5
echo "${ECHO_T}unsupported" >&6; } ;;
  *)
    CC="$CC $ac_cv_prog_cc_c89"
    { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
esac


ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu

ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
if test -z "$CXX"; then
  if test -n "$CCC"; then
    CXX=$CCC
  else
    if test -n "$ac_tool_prefix"; then
  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
  do
    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
{ echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_CXX+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$CXX"; then
  ac_cv_prog_CXX="$CXX" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_exec_ext in '' $ac_executable_extensions; do
  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
    ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
done
IFS=$as_save_IFS

fi
fi
CXX=$ac_cv_prog_CXX
if test -n "$CXX"; then
  { echo "$as_me:$LINENO: result: $CXX" >&5
echo "${ECHO_T}$CXX" >&6; }
else
  { echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi


    test -n "$CXX" && break
  done
fi
if test -z "$CXX"; then
  ac_ct_CXX=$CXX
  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
do
  # Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
{ echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$ac_ct_CXX"; then
  ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_exec_ext in '' $ac_executable_extensions; do
  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
    ac_cv_prog_ac_ct_CXX="$ac_prog"
    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
done
IFS=$as_save_IFS

fi
fi
ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
if test -n "$ac_ct_CXX"; then
  { echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
echo "${ECHO_T}$ac_ct_CXX" >&6; }
else
  { echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi


  test -n "$ac_ct_CXX" && break
done

  if test "x$ac_ct_CXX" = x; then
    CXX="g++"
  else
    case $cross_compiling:$ac_tool_warned in
yes:)
{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
whose name does not start with the host triplet.  If you think this
configuration is useful to you, please write to autoconf@xxxxxxx." >&5
echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
whose name does not start with the host triplet.  If you think this
configuration is useful to you, please write to autoconf@xxxxxxx." >&2;}
ac_tool_warned=yes ;;
esac
    CXX=$ac_ct_CXX
  fi
fi

  fi
fi
# Provide some information about the compiler.
echo "$as_me:$LINENO: checking for C++ compiler version" >&5
ac_compiler=`set X $ac_compile; echo $2`
{ (ac_try="$ac_compiler --version >&5"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_compiler --version >&5") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }
{ (ac_try="$ac_compiler -v >&5"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_compiler -v >&5") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }
{ (ac_try="$ac_compiler -V >&5"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_compiler -V >&5") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }

{ echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6; }
if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */

int
main ()
{
#ifndef __GNUC__
       choke me
#endif

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_compile") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && {
	 test -z "$ac_cxx_werror_flag" ||
	 test ! -s conftest.err
       } && test -s conftest.$ac_objext; then
  ac_compiler_gnu=yes
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

	ac_compiler_gnu=no
fi

rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
ac_cv_cxx_compiler_gnu=$ac_compiler_gnu

fi
{ echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6; }
GXX=`test $ac_compiler_gnu = yes && echo yes`
ac_test_CXXFLAGS=${CXXFLAGS+set}
ac_save_CXXFLAGS=$CXXFLAGS
{ echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6; }
if test "${ac_cv_prog_cxx_g+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_save_cxx_werror_flag=$ac_cxx_werror_flag
   ac_cxx_werror_flag=yes
   ac_cv_prog_cxx_g=no
   CXXFLAGS="-g"
   cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */

int
main ()
{

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_compile") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && {
	 test -z "$ac_cxx_werror_flag" ||
	 test ! -s conftest.err
       } && test -s conftest.$ac_objext; then
  ac_cv_prog_cxx_g=yes
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

	CXXFLAGS=""
      cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */

int
main ()
{

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_compile") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && {
	 test -z "$ac_cxx_werror_flag" ||
	 test ! -s conftest.err
       } && test -s conftest.$ac_objext; then
  :
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

	ac_cxx_werror_flag=$ac_save_cxx_werror_flag
	 CXXFLAGS="-g"
	 cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */

int
main ()
{

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_compile") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && {
	 test -z "$ac_cxx_werror_flag" ||
	 test ! -s conftest.err
       } && test -s conftest.$ac_objext; then
  ac_cv_prog_cxx_g=yes
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5


fi

rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi

rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi

rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
   ac_cxx_werror_flag=$ac_save_cxx_werror_flag
fi
{ echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6; }
if test "$ac_test_CXXFLAGS" = set; then
  CXXFLAGS=$ac_save_CXXFLAGS
elif test $ac_cv_prog_cxx_g = yes; then
  if test "$GXX" = yes; then
    CXXFLAGS="-g -O2"
  else
    CXXFLAGS="-g"
  fi
else
  if test "$GXX" = yes; then
    CXXFLAGS="-O2"
  else
    CXXFLAGS=
  fi
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu



# Check whether --with-nasm-prefix was given.
if test "${with_nasm_prefix+set}" = set; then
  withval=$with_nasm_prefix; nasm_prefix="$withval"
else
  nasm_prefix=""
fi

if test -n "$ac_tool_prefix"; then
  # Extract the first word of "${ac_tool_prefix}nasm", so it can be a program name with args.
set dummy ${ac_tool_prefix}nasm; ac_word=$2
{ echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_NASMPATH+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$NASMPATH"; then
  ac_cv_prog_NASMPATH="$NASMPATH" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
as_dummy="$nasm_prefix:$PATH"
for as_dir in $as_dummy
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_exec_ext in '' $ac_executable_extensions; do
  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
    ac_cv_prog_NASMPATH="${ac_tool_prefix}nasm"
    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
done
IFS=$as_save_IFS

fi
fi
NASMPATH=$ac_cv_prog_NASMPATH
if test -n "$NASMPATH"; then
  { echo "$as_me:$LINENO: result: $NASMPATH" >&5
echo "${ECHO_T}$NASMPATH" >&6; }
else
  { echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi


fi
if test -z "$ac_cv_prog_NASMPATH"; then
  ac_ct_NASMPATH=$NASMPATH
  # Extract the first word of "nasm", so it can be a program name with args.
set dummy nasm; ac_word=$2
{ echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_ac_ct_NASMPATH+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$ac_ct_NASMPATH"; then
  ac_cv_prog_ac_ct_NASMPATH="$ac_ct_NASMPATH" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
as_dummy="$nasm_prefix:$PATH"
for as_dir in $as_dummy
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_exec_ext in '' $ac_executable_extensions; do
  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
    ac_cv_prog_ac_ct_NASMPATH="nasm"
    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
done
IFS=$as_save_IFS

fi
fi
ac_ct_NASMPATH=$ac_cv_prog_ac_ct_NASMPATH
if test -n "$ac_ct_NASMPATH"; then
  { echo "$as_me:$LINENO: result: $ac_ct_NASMPATH" >&5
echo "${ECHO_T}$ac_ct_NASMPATH" >&6; }
else
  { echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi

  if test "x$ac_ct_NASMPATH" = x; then
    NASMPATH=""no""
  else
    case $cross_compiling:$ac_tool_warned in
yes:)
{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
whose name does not start with the host triplet.  If you think this
configuration is useful to you, please write to autoconf@xxxxxxx." >&5
echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
whose name does not start with the host triplet.  If you think this
configuration is useful to you, please write to autoconf@xxxxxxx." >&2;}
ac_tool_warned=yes ;;
esac
    NASMPATH=$ac_ct_NASMPATH
  fi
else
  NASMPATH="$ac_cv_prog_NASMPATH"
fi

if test x$NASMPATH = xno; then
  { { echo "$as_me:$LINENO: error: You need NASM installed to compile ZSNES" >&5
echo "$as_me: error: You need NASM installed to compile ZSNES" >&2;}
   { (exit 1); exit 1; }; }
fi


# Check whether --with-zconf-path was given.
if test "${with_zconf_path+set}" = set; then
  withval=$with_zconf_path; ZCONF="$withval"
else
  ZCONF=""
fi


CFLAGS="$CFLAGS -D__UNIXSDL__"
NFLAGS="$NFLAGS -w-orphan-labels -D__UNIXSDL__"
PSRFLAGS="$PSRFLAGS -D__UNIXSDL__"
MMLIB_FILES="\$(MMLIB_D)/mm.o"
STRIP="-s"
case x$target in
  *-*-linux*)
    NFLAGS="$NFLAGS -f elf -DELF"
    MMLIB_FILES="$MMLIB_FILES \$(MMLIB_D)/linux.o"
    ;;
  *-*-beos*)
    CFLAGS="$CFLAGS -D__BEOS__"
    NFLAGS="$NFLAGS -D__BEOS__ -f elf -DELF"
    ;;
  *-*-*bsd*)
    CFLAGS="$CFLAGS -D__BSDSDL__"
    NFLAGS="$NFLAGS -D__BSDSDL__ -f elf -DELF"
    ;;
  *-*-darwin* )
    CFLAGS="$CFLAGS -D__MACOSX__ -D__OPENGL__ -arch i386 -mdynamic-no-pic -mstackrealign -fno-unit-at-a-time"
    NFLAGS="$NFLAGS -D__MACOSX__ -D__OPENGL__ -f macho -DMACHO"
    PSRFLAGS="$PSRFLAGS -D__OPENGL__"
    MMLIB_FILES="$MMLIB_FILES \$(MMLIB_D)/osx.o"
    STRIP=""
    LDFLAGS="$LDFLAGS -framework Carbon -framework IOKit -framework Foundation -framework OpenGL -mdynamic-no-pic -read_only_relocs suppress -undefined dynamic_lookup"
    GL_DRAW="\$(PORT_D)/gl_draw.o"
    found_opengl=yes
    ;;
  *-*-cygwin* | *-*-*ming*)
    NFLAGS="$NFLAGS -f win32"
    ;;
  *)
    { { echo "$as_me:$LINENO: error: This target is not supported" >&5
echo "$as_me: error: This target is not supported" >&2;}
   { (exit 1); exit 1; }; }
    ;;
esac

if test x$ZCONF != x; then
  CFLAGS="$CFLAGS -DZCONF=\"\\\"$ZCONF\\\"\""
fi




# Check whether --with-sdl-prefix was given.
if test "${with_sdl_prefix+set}" = set; then
  withval=$with_sdl_prefix; sdl_prefix="$withval"
else
  sdl_prefix=""
fi


# Check whether --with-sdl-exec-prefix was given.
if test "${with_sdl_exec_prefix+set}" = set; then
  withval=$with_sdl_exec_prefix; sdl_exec_prefix="$withval"
else
  sdl_exec_prefix=""
fi

# Check whether --enable-sdltest was given.
if test "${enable_sdltest+set}" = set; then
  enableval=$enable_sdltest;
else
  enable_sdltest=yes
fi


  if test x$sdl_exec_prefix != x ; then
    sdl_args="$sdl_args --exec-prefix=$sdl_exec_prefix"
    if test x${SDL_CONFIG+set} != xset ; then
      SDL_CONFIG=$sdl_exec_prefix/bin/sdl-config
    fi
  fi
  if test x$sdl_prefix != x ; then
    sdl_args="$sdl_args --prefix=$sdl_prefix"
    if test x${SDL_CONFIG+set} != xset ; then
      SDL_CONFIG=$sdl_prefix/bin/sdl-config
    fi
  fi

  if test "x$prefix" != xNONE; then
    PATH="$prefix/bin:$prefix/usr/bin:$PATH"
  fi
  # Extract the first word of "sdl-config", so it can be a program name with args.
set dummy sdl-config; ac_word=$2
{ echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_path_SDL_CONFIG+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  case $SDL_CONFIG in
  [\\/]* | ?:[\\/]*)
  ac_cv_path_SDL_CONFIG="$SDL_CONFIG" # Let the user override the test with a path.
  ;;
  *)
  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_exec_ext in '' $ac_executable_extensions; do
  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
    ac_cv_path_SDL_CONFIG="$as_dir/$ac_word$ac_exec_ext"
    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
done
IFS=$as_save_IFS

  test -z "$ac_cv_path_SDL_CONFIG" && ac_cv_path_SDL_CONFIG="no"
  ;;
esac
fi
SDL_CONFIG=$ac_cv_path_SDL_CONFIG
if test -n "$SDL_CONFIG"; then
  { echo "$as_me:$LINENO: result: $SDL_CONFIG" >&5
echo "${ECHO_T}$SDL_CONFIG" >&6; }
else
  { echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi


  min_sdl_version=1.2.0
  { echo "$as_me:$LINENO: checking for SDL - version >= $min_sdl_version" >&5
echo $ECHO_N "checking for SDL - version >= $min_sdl_version... $ECHO_C" >&6; }
  no_sdl=""
  if test "$SDL_CONFIG" = "no" ; then
    no_sdl=yes
  else
    SDL_CFLAGS=`$SDL_CONFIG $sdlconf_args --cflags`
    SDL_LIBS=`$SDL_CONFIG $sdlconf_args --libs`

    sdl_major_version=`$SDL_CONFIG $sdl_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
    sdl_minor_version=`$SDL_CONFIG $sdl_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
    sdl_micro_version=`$SDL_CONFIG $sdl_config_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`
    if test "x$enable_sdltest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_CXXFLAGS="$CXXFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $SDL_CFLAGS"
      CXXFLAGS="$CXXFLAGS $SDL_CFLAGS"
      LIBS="$LIBS $SDL_LIBS"
      rm -f conf.sdltest
      if test "$cross_compiling" = yes; then
  echo $ac_n "cross compiling; assumed OK... $ac_c"
else
  cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "SDL.h"

char*
my_strdup (char *str)
{
  char *new_str;

  if (str)
    {
      new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char));
      strcpy (new_str, str);
    }
  else
    new_str = NULL;

  return new_str;
}

int main (int argc, char *argv[])
{
  int major, minor, micro;
  char *tmp_version;

  /* This hangs on some systems (?)
  system ("touch conf.sdltest");
  */
  { FILE *fp = fopen("conf.sdltest", "a"); if ( fp ) fclose(fp); }

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = my_strdup("$min_sdl_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_sdl_version");
     exit(1);
   }

   if (($sdl_major_version > major) ||
      (($sdl_major_version == major) && ($sdl_minor_version > minor)) ||
      (($sdl_major_version == major) && ($sdl_minor_version == minor) && ($sdl_micro_version >= micro)))
    {
      return 0;
    }
  else
    {
      printf("\n*** 'sdl-config --version' returned %d.%d.%d, but the minimum version\n", $sdl_major_version, $sdl_minor_version, $sdl_micro_version);
      printf("*** of SDL required is %d.%d.%d. If sdl-config is correct, then it is\n", major, minor, micro);
      printf("*** best to upgrade to the required version.\n");
      printf("*** If sdl-config was wrong, set the environment variable SDL_CONFIG\n");
      printf("*** to point to the correct copy of sdl-config, and remove the file\n");
      printf("*** config.cache before re-running configure\n");
      return 1;
    }
}


_ACEOF
rm -f conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_link") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
  { (case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_try") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  :
else
  echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

( exit $ac_status )
no_sdl=yes
fi
rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi


       CFLAGS="$ac_save_CFLAGS"
       CXXFLAGS="$ac_save_CXXFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_sdl" = x ; then
     { echo "$as_me:$LINENO: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
     :
  else
     { echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6; }
     if test "$SDL_CONFIG" = "no" ; then
       echo "*** The sdl-config script installed by SDL could not be found"
       echo "*** If SDL was installed in PREFIX, make sure PREFIX/bin is in"
       echo "*** your path, or set the SDL_CONFIG environment variable to the"
       echo "*** full path to sdl-config."
     else
       if test -f conf.sdltest ; then
        :
       else
          echo "*** Could not run SDL test program, checking why..."
          CFLAGS="$CFLAGS $SDL_CFLAGS"
          CXXFLAGS="$CXXFLAGS $SDL_CFLAGS"
          LIBS="$LIBS $SDL_LIBS"
          cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */

#include <stdio.h>
#include "SDL.h"

int main(int argc, char *argv[])
{ return 0; }
#undef  main
#define main K_and_R_C_main

int
main ()
{
 return 0;
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_link") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && {
	 test -z "$ac_c_werror_flag" ||
	 test ! -s conftest.err
       } && test -s conftest$ac_exeext &&
       $as_test_x conftest$ac_exeext; then
   echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding SDL or finding the wrong"
          echo "*** version of SDL. If it is not finding SDL, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

	 echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means SDL was incorrectly installed"
          echo "*** or that you have moved SDL since it was installed. In the latter case, you"
          echo "*** may want to edit the sdl-config script: $SDL_CONFIG"
fi

rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
      conftest$ac_exeext conftest.$ac_ext
          CFLAGS="$ac_save_CFLAGS"
          CXXFLAGS="$ac_save_CXXFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     SDL_CFLAGS=""
     SDL_LIBS=""
     { { echo "$as_me:$LINENO: error: SDL >= 1.2.0 is required" >&5
echo "$as_me: error: SDL >= 1.2.0 is required" >&2;}
   { (exit 1); exit 1; }; }
  fi


  rm -f conf.sdltest



# Check whether --with-zlib-prefix was given.
if test "${with_zlib_prefix+set}" = set; then
  withval=$with_zlib_prefix; zlib_prefix="$withval"
else
  zlib_prefix=""
fi

min_zlib_version=1.2.3
{ echo "$as_me:$LINENO: checking for zlib - version >= $min_zlib_version" >&5
echo $ECHO_N "checking for zlib - version >= $min_zlib_version... $ECHO_C" >&6; }

tempLIBS="$LIBS"
tempCFLAGS="$CFLAGS"
if test x$zlib_prefix != x ; then
  ZLIB_LIBS="-L$zlib_prefix"
  ZLIB_CFLAGS="-I$zlib_prefix"
fi
ZLIB_LIBS="$ZLIB_LIBS -lz"
LIBS="$LIBS $ZLIB_LIBS"
CFLAGS="$CFLAGS $ZLIB_CFLAGS"
echo "ZLIB_CFLAGS: $ZLIB_CFLAGS"
echo "ZLIB_LIBS: $ZLIB_LIBS"
echo "ZLIB_VERSION: $ZLIB_VERSION"
echo "min_zlib_version: $min_zlib_version"
echo "LIBS: $LIBS"
echo "CFLAGS: $CFLAGS"

if test "$cross_compiling" = yes; then
  { echo "$as_me:$LINENO: result: cross-compiling" >&5
echo "${ECHO_T}cross-compiling" >&6; }
echo "with_zlib0: $with_zlib"
  with_zlib=""
echo "with_zlib1: $with_zlib"
  { echo "$as_me:$LINENO: WARNING: Assuming zlib is available" >&5
echo "$as_me: WARNING: Assuming zlib is available" >&2;}
else
  cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */

#include <zlib.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>

char* my_strdup (char *str)
{
  char *new_str;

  if (str)
  {
    new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char));
    strcpy (new_str, str);
  }
  else new_str = NULL;

  return new_str;
}

int main (int argc, char *argv[])
{
  int major, minor, micro, zlib_major_version, zlib_minor_version, zlib_micro_version;

  char *zlibver, *tmp_version;

  zlibver = ZLIB_VERSION;

  FILE *fp = fopen("conf.zlibtest", "a");
  if ( fp ) {
    fprintf(fp, "%s", zlibver);
    fclose(fp);
  }

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = my_strdup("$min_zlib_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
    printf("%s, bad version string for\n\tmin_zlib_version... ", "$min_zlib_version");
    exit(1);
  }
  if (sscanf(zlibver, "%d.%d.%d", &zlib_major_version, &zlib_minor_version, &zlib_micro_version) != 3) {
    printf("%s, bad version string given\n", zlibver);
    puts("\tby zlib, sometimes due to very old zlibs that didnt correctly");
    printf("\tdefine their version. Please upgrade if you are running an\n\told zlib... ");
    exit(1);
  }

  if ((zlib_major_version > major) ||
     ((zlib_major_version == major) && (zlib_minor_version > minor)) ||
     ((zlib_major_version == major) && (zlib_minor_version == minor) && (zlib_micro_version >= micro)))
  {
    return 0;
  }
  else
  {
    return 1;
  }
}

_ACEOF
rm -f conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_link") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
  { (case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_try") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  with_zlib=yes
echo "with_zlib=yes?: $with_zlib"
else
  echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

( exit $ac_status )
with_zlib=no
echo "with_zlib=no?: $with_zlib"
fi
rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi


echo "with_zlib4: $with_zlib"
if test x$with_zlib != x; then
  { echo "$as_me:$LINENO: result: $with_zlib" >&5
echo "${ECHO_T}$with_zlib" echo "with_zlib5: $with_zlib" >&6; }
fi
if test x$with_zlib = xyes; then
  ZLIB_VERSION=$(<conf.zlibtest)
	echo "with_zlib5: $with_zlib"
  :
else
  ZLIB_CFLAGS=""
  ZLIB_LIBS=""
  ZLIB_VERSION=""
  { { echo "$as_me:$LINENO: error: zlib >= 1.2.3 is required" >&5
echo "$as_me: error: zlib >= 1.2.3 is required" >&2;}
   { (exit 1); exit 1; }; }
fi
LIBS="$tempLIBS"
CFLAGS="$tempCFLAGS"
rm conf.zlibtest




CFLAGS="$CFLAGS $ZLIB_CFLAGS"
LDFLAGS="$LDFLAGS $ZLIB_LIBS"



# Check whether --enable-libpng was given.
if test "${enable_libpng+set}" = set; then
  enableval=$enable_libpng;
else
  enable_libpng=yes
fi



# Check whether --with-libpng-prefix was given.
if test "${with_libpng_prefix+set}" = set; then
  withval=$with_libpng_prefix; libpng_prefix="$withval"
else
  libpng_prefix=""
fi


min_libpng_version=1.2.0
tempLIBS="$LIBS"
tempCFLAGS="$CFLAGS"
if test x$libpng_prefix != x ; then
  LIBPNG_LIBS="-L$libpng_prefix"
  LIBPNG_CFLAGS="-I$libpng_prefix"
fi
LIBPNG_LIBS="$LIBPNG_LIBS -lpng -lm"
LIBS="$LIBS $LIBPNG_LIBS"
CFLAGS="$CFLAGS $LIBPNG_CFLAGS"

{ echo "$as_me:$LINENO: checking for libpng - version >= $min_libpng_version" >&5
echo $ECHO_N "checking for libpng - version >= $min_libpng_version... $ECHO_C" >&6; }

if test x$enable_libpng != xno; then

  if test "$cross_compiling" = yes; then
  { echo "$as_me:$LINENO: result: cross-compiling" >&5
echo "${ECHO_T}cross-compiling" >&6; }
  with_libpng=""
  { echo "$as_me:$LINENO: WARNING: Assuming libpng is available" >&5
echo "$as_me: WARNING: Assuming libpng is available" >&2;}
else
  cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */

#include <png.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>

char* my_strdup (char *str)
{
  char *new_str;

  if (str)
  {
    new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char));
    strcpy (new_str, str);
  }
  else new_str = NULL;

  return new_str;
}

int main (int argc, char *argv[])
{
  int major, minor, micro, libpng_major_version, libpng_minor_version, libpng_micro_version;
  char *libpngver, *tmp_version;

  libpngver = PNG_LIBPNG_VER_STRING;

  FILE *fp = fopen("conf.libpngtest", "a");
  if ( fp ) {
    fprintf(fp, "%s", libpngver);
    fclose(fp);
  }

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = my_strdup("$min_libpng_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
    printf("%s, bad version string for\n\tmin_libpng_version... ", "$min_libpng_version");
    exit(1);
  }
  if (sscanf(libpngver, "%d.%d.%d", &libpng_major_version, &libpng_minor_version, &libpng_micro_version) != 3) {
    printf("%s, bad version string given\n", libpngver);
    puts("\tby libpng, sometimes due to very old libpngs that didnt correctly");
    printf("\tdefine their version. Please upgrade if you are running an\n\told libpng... ");
    exit(1);
  }
  if ((libpng_major_version > major) ||
     ((libpng_major_version == major) && (libpng_minor_version > minor)) ||
     ((libpng_major_version == major) && (libpng_minor_version == minor) && (libpng_micro_version >= micro)))
  {
    return 0;
  }
  else
  {
    return 1;
  }
}

_ACEOF
rm -f conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_link") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
  { (case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_try") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  with_libpng=yes
else
  echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

( exit $ac_status )
with_libpng=no
fi
rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi



  if test x$with_libpng != x; then
    { echo "$as_me:$LINENO: result: $with_libpng" >&5
echo "${ECHO_T}$with_libpng" >&6; }
  fi
  if test x$with_libpng = xyes; then
    LIBPNG_VERSION=$(<conf.libpngtest)
    :
  else
    LIBPNG_CFLAGS=""
    LIBPNG_LIBS=""
    LIBPNG_VERSION=""
    :
  fi
  LIBS="$tempLIBS"
  CFLAGS="$tempCFLAGS"
  rm conf.libpngtest




else
  { echo "$as_me:$LINENO: result: disabled by user" >&5
echo "${ECHO_T}disabled by user" >&6; }
fi

CFLAGS="$CFLAGS $SDL_CFLAGS"
LDFLAGS="$LDFLAGS $SDL_LIBS"

if test x$with_libpng != xyes; then
  CFLAGS="$CFLAGS -DNO_PNG"
  NFLAGS="$NFLAGS -DNO_PNG"
  PSRFLAGS="$PSRFLAGS -DNO_PNG"
else
  CFLAGS="$CFLAGS $LIBPNG_CFLAGS"
  LDFLAGS="$LDFLAGS $LIBPNG_LIBS"
fi

# Check whether --enable-debugger was given.
if test "${enable_debugger+set}" = set; then
  enableval=$enable_debugger;
else
  enable_debugger=yes
fi

{ echo "$as_me:$LINENO: checking if you want the zsnes debugger" >&5
echo $ECHO_N "checking if you want the zsnes debugger... $ECHO_C" >&6; }
{ echo "$as_me:$LINENO: result: $enable_debugger" >&5
echo "${ECHO_T}$enable_debugger" >&6; }
if test x$enable_debugger != xyes; then
  CFLAGS="$CFLAGS -DNO_DEBUGGER"
  NFLAGS="$NFLAGS -DNO_DEBUGGER"
  PSRFLAGS="$PSRFLAGS -DNO_DEBUGGER"
  DEBUGGER_FILES=""
else
  DEBUGGER_FILES="debugasm.o debugger.o"

  { echo "$as_me:$LINENO: checking for initscr in -lcurses" >&5
echo $ECHO_N "checking for initscr in -lcurses... $ECHO_C" >&6; }
if test "${ac_cv_lib_curses_initscr+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-lcurses  $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */

/* Override any GCC internal prototype to avoid an error.
   Use char because int might match the return type of a GCC
   builtin and then its argument prototype would still apply.  */
#ifdef __cplusplus
extern "C"
#endif
char initscr ();
int
main ()
{
return initscr ();
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_link") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && {
	 test -z "$ac_c_werror_flag" ||
	 test ! -s conftest.err
       } && test -s conftest$ac_exeext &&
       $as_test_x conftest$ac_exeext; then
  ac_cv_lib_curses_initscr=yes
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

	ac_cv_lib_curses_initscr=no
fi

rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
      conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:$LINENO: result: $ac_cv_lib_curses_initscr" >&5
echo "${ECHO_T}$ac_cv_lib_curses_initscr" >&6; }
if test $ac_cv_lib_curses_initscr = yes; then
  found_curses=yes
else
  found_curses=no
fi

  { echo "$as_me:$LINENO: checking for initscr in -lncurses" >&5
echo $ECHO_N "checking for initscr in -lncurses... $ECHO_C" >&6; }
if test "${ac_cv_lib_ncurses_initscr+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-lncurses  $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */

/* Override any GCC internal prototype to avoid an error.
   Use char because int might match the return type of a GCC
   builtin and then its argument prototype would still apply.  */
#ifdef __cplusplus
extern "C"
#endif
char initscr ();
int
main ()
{
return initscr ();
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_link") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && {
	 test -z "$ac_c_werror_flag" ||
	 test ! -s conftest.err
       } && test -s conftest$ac_exeext &&
       $as_test_x conftest$ac_exeext; then
  ac_cv_lib_ncurses_initscr=yes
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

	ac_cv_lib_ncurses_initscr=no
fi

rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
      conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:$LINENO: result: $ac_cv_lib_ncurses_initscr" >&5
echo "${ECHO_T}$ac_cv_lib_ncurses_initscr" >&6; }
if test $ac_cv_lib_ncurses_initscr = yes; then
  found_ncurses=yes
else
  found_ncurses=no
fi

  { echo "$as_me:$LINENO: checking for initscr in -lpdcurses" >&5
echo $ECHO_N "checking for initscr in -lpdcurses... $ECHO_C" >&6; }
if test "${ac_cv_lib_pdcurses_initscr+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-lpdcurses  $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */

/* Override any GCC internal prototype to avoid an error.
   Use char because int might match the return type of a GCC
   builtin and then its argument prototype would still apply.  */
#ifdef __cplusplus
extern "C"
#endif
char initscr ();
int
main ()
{
return initscr ();
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_link") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && {
	 test -z "$ac_c_werror_flag" ||
	 test ! -s conftest.err
       } && test -s conftest$ac_exeext &&
       $as_test_x conftest$ac_exeext; then
  ac_cv_lib_pdcurses_initscr=yes
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

	ac_cv_lib_pdcurses_initscr=no
fi

rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
      conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:$LINENO: result: $ac_cv_lib_pdcurses_initscr" >&5
echo "${ECHO_T}$ac_cv_lib_pdcurses_initscr" >&6; }
if test $ac_cv_lib_pdcurses_initscr = yes; then
  found_pdcurses=yes
else
  found_pdcurses=no
fi


  if test x$found_curses = xyes; then
    LDFLAGS="$LDFLAGS -lcurses"
  else
    if test x$found_ncurses = xyes; then
      CFLAGS="$CFLAGS -DNCURSES"
      LDFLAGS="$LDFLAGS -lncurses"
    else
      if test x$found_pdcurses = xyes; then
        LDFLAGS="$LDFLAGS -lpdcurses"
      else
        { { echo "$as_me:$LINENO: error: A curses library is required to use the debugger" >&5
echo "$as_me: error: A curses library is required to use the debugger" >&2;}
   { (exit 1); exit 1; }; }
        DEBUGGER_FILES=""
      fi
    fi
  fi
fi

# Check whether --enable-libao was given.
if test "${enable_libao+set}" = set; then
  enableval=$enable_libao; want_ao=$enableval
else
  want_ao=no
fi

{ echo "$as_me:$LINENO: checking if you want libao support" >&5
echo $ECHO_N "checking if you want libao support... $ECHO_C" >&6; }
{ echo "$as_me:$LINENO: result: $want_ao" >&5
echo "${ECHO_T}$want_ao" >&6; }
if test x$want_ao = xyes; then
  { echo "$as_me:$LINENO: checking for ao_initialize in -lao" >&5
echo $ECHO_N "checking for ao_initialize in -lao... $ECHO_C" >&6; }
if test "${ac_cv_lib_ao_ao_initialize+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-lao  $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */

/* Override any GCC internal prototype to avoid an error.
   Use char because int might match the return type of a GCC
   builtin and then its argument prototype would still apply.  */
#ifdef __cplusplus
extern "C"
#endif
char ao_initialize ();
int
main ()
{
return ao_initialize ();
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_link") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && {
	 test -z "$ac_c_werror_flag" ||
	 test ! -s conftest.err
       } && test -s conftest$ac_exeext &&
       $as_test_x conftest$ac_exeext; then
  ac_cv_lib_ao_ao_initialize=yes
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

	ac_cv_lib_ao_ao_initialize=no
fi

rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
      conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:$LINENO: result: $ac_cv_lib_ao_ao_initialize" >&5
echo "${ECHO_T}$ac_cv_lib_ao_ao_initialize" >&6; }
if test $ac_cv_lib_ao_ao_initialize = yes; then
  got_ao=yes
else
  got_ao=no
fi


  if test x$got_ao = xyes; then
    CFLAGS="$CFLAGS -D__LIBAO__"
    LDFLAGS="$LDFLAGS -lao"
  else
    { { echo "$as_me:$LINENO: error: Couldn't find libao" >&5
echo "$as_me: error: Couldn't find libao" >&2;}
   { (exit 1); exit 1; }; }
  fi
fi

if test x$found_opengl != xyes; then
  # Check whether --enable-opengl was given.
if test "${enable_opengl+set}" = set; then
  enableval=$enable_opengl;
else
  enable_opengl=yes
fi


# Check whether --with-opengl-prefix was given.
if test "${with_opengl_prefix+set}" = set; then
  withval=$with_opengl_prefix; opengl_prefix="$withval"
else
  opengl_prefix=""
fi

  if test x$enable_opengl != xno; then
    ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
  CPP=
fi
if test -z "$CPP"; then
  if test "${ac_cv_prog_CPP+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
      # Double quotes because CPP needs to be expanded
    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
    do
      ac_preproc_ok=false
for ac_c_preproc_warn_flag in '' yes
do
  # Use a header file that comes with gcc, so configuring glibc
  # with a fresh cross-compiler works.
  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
  # <limits.h> exists even on freestanding compilers.
  # On the NeXT, cc -E runs the code through the compiler's parser,
  # not just through cpp. "Syntax error" is here to catch this case.
  cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif
		     Syntax error
_ACEOF
if { (ac_try="$ac_cpp conftest.$ac_ext"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } >/dev/null && {
	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
	 test ! -s conftest.err
       }; then
  :
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

  # Broken: fails on valid input.
continue
fi

rm -f conftest.err conftest.$ac_ext

  # OK, works on sane cases.  Now check whether nonexistent headers
  # can be detected and how.
  cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
#include <ac_nonexistent.h>
_ACEOF
if { (ac_try="$ac_cpp conftest.$ac_ext"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } >/dev/null && {
	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
	 test ! -s conftest.err
       }; then
  # Broken: success on invalid input.
continue
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

  # Passes both tests.
ac_preproc_ok=:
break
fi

rm -f conftest.err conftest.$ac_ext

done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
rm -f conftest.err conftest.$ac_ext
if $ac_preproc_ok; then
  break
fi

    done
    ac_cv_prog_CPP=$CPP

fi
  CPP=$ac_cv_prog_CPP
else
  ac_cv_prog_CPP=$CPP
fi
{ echo "$as_me:$LINENO: result: $CPP" >&5
echo "${ECHO_T}$CPP" >&6; }
ac_preproc_ok=false
for ac_c_preproc_warn_flag in '' yes
do
  # Use a header file that comes with gcc, so configuring glibc
  # with a fresh cross-compiler works.
  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
  # <limits.h> exists even on freestanding compilers.
  # On the NeXT, cc -E runs the code through the compiler's parser,
  # not just through cpp. "Syntax error" is here to catch this case.
  cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif
		     Syntax error
_ACEOF
if { (ac_try="$ac_cpp conftest.$ac_ext"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } >/dev/null && {
	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
	 test ! -s conftest.err
       }; then
  :
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

  # Broken: fails on valid input.
continue
fi

rm -f conftest.err conftest.$ac_ext

  # OK, works on sane cases.  Now check whether nonexistent headers
  # can be detected and how.
  cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
#include <ac_nonexistent.h>
_ACEOF
if { (ac_try="$ac_cpp conftest.$ac_ext"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } >/dev/null && {
	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
	 test ! -s conftest.err
       }; then
  # Broken: success on invalid input.
continue
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

  # Passes both tests.
ac_preproc_ok=:
break
fi

rm -f conftest.err conftest.$ac_ext

done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
rm -f conftest.err conftest.$ac_ext
if $ac_preproc_ok; then
  :
else
  { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
See \`config.log' for more details." >&5
echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
See \`config.log' for more details." >&2;}
   { (exit 1); exit 1; }; }
fi

ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu


{ echo "$as_me:$LINENO: checking for X" >&5
echo $ECHO_N "checking for X... $ECHO_C" >&6; }


# Check whether --with-x was given.
if test "${with_x+set}" = set; then
  withval=$with_x;
fi

# $have_x is `yes', `no', `disabled', or empty when we do not yet know.
if test "x$with_x" = xno; then
  # The user explicitly disabled X.
  have_x=disabled
else
  case $x_includes,$x_libraries in #(
    *\'*) { { echo "$as_me:$LINENO: error: Cannot use X directory names containing '" >&5
echo "$as_me: error: Cannot use X directory names containing '" >&2;}
   { (exit 1); exit 1; }; };; #(
    *,NONE | NONE,*) if test "${ac_cv_have_x+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  # One or both of the vars are not set, and there is no cached value.
ac_x_includes=no ac_x_libraries=no
rm -f -r conftest.dir
if mkdir conftest.dir; then
  cd conftest.dir
  cat >Imakefile <<'_ACEOF'
incroot:
	@echo incroot='${INCROOT}'
usrlibdir:
	@echo usrlibdir='${USRLIBDIR}'
libdir:
	@echo libdir='${LIBDIR}'
_ACEOF
  if (export CC; ${XMKMF-xmkmf}) >/dev/null 2>/dev/null && test -f Makefile; then
    # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
    for ac_var in incroot usrlibdir libdir; do
      eval "ac_im_$ac_var=\`\${MAKE-make} $ac_var 2>/dev/null | sed -n 's/^$ac_var=//p'\`"
    done
    # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
    for ac_extension in a so sl; do
      if test ! -f "$ac_im_usrlibdir/libX11.$ac_extension" &&
	 test -f "$ac_im_libdir/libX11.$ac_extension"; then
	ac_im_usrlibdir=$ac_im_libdir; break
      fi
    done
    # Screen out bogus values from the imake configuration.  They are
    # bogus both because they are the default anyway, and because
    # using them would break gcc on systems where it needs fixed includes.
    case $ac_im_incroot in
	/usr/include) ac_x_includes= ;;
	*) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;;
    esac
    case $ac_im_usrlibdir in
	/usr/lib | /lib) ;;
	*) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;;
    esac
  fi
  cd ..
  rm -f -r conftest.dir
fi

# Standard set of common directories for X headers.
# Check X11 before X11Rn because it is often a symlink to the current release.
ac_x_header_dirs='
/usr/X11/include
/usr/X11R6/include
/usr/X11R5/include
/usr/X11R4/include

/usr/include/X11
/usr/include/X11R6
/usr/include/X11R5
/usr/include/X11R4

/usr/local/X11/include
/usr/local/X11R6/include
/usr/local/X11R5/include
/usr/local/X11R4/include

/usr/local/include/X11
/usr/local/include/X11R6
/usr/local/include/X11R5
/usr/local/include/X11R4

/usr/X386/include
/usr/x386/include
/usr/XFree86/include/X11

/usr/include
/usr/local/include
/usr/unsupported/include
/usr/athena/include
/usr/local/x11r5/include
/usr/lpp/Xamples/include

/usr/openwin/include
/usr/openwin/share/include'

if test "$ac_x_includes" = no; then
  # Guess where to find include files, by looking for Xlib.h.
  # First, try using that file with no special directory specified.
  cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
#include <X11/Xlib.h>
_ACEOF
if { (ac_try="$ac_cpp conftest.$ac_ext"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } >/dev/null && {
	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
	 test ! -s conftest.err
       }; then
  # We can compile using X headers with no special include directory.
ac_x_includes=
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

  for ac_dir in $ac_x_header_dirs; do
  if test -r "$ac_dir/X11/Xlib.h"; then
    ac_x_includes=$ac_dir
    break
  fi
done
fi

rm -f conftest.err conftest.$ac_ext
fi # $ac_x_includes = no

if test "$ac_x_libraries" = no; then
  # Check for the libraries.
  # See if we find them without any special options.
  # Don't add to $LIBS permanently.
  ac_save_LIBS=$LIBS
  LIBS="-lX11 $LIBS"
  cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
#include <X11/Xlib.h>
int
main ()
{
XrmInitialize ()
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_link") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && {
	 test -z "$ac_c_werror_flag" ||
	 test ! -s conftest.err
       } && test -s conftest$ac_exeext &&
       $as_test_x conftest$ac_exeext; then
  LIBS=$ac_save_LIBS
# We can link X programs with no special library path.
ac_x_libraries=
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

	LIBS=$ac_save_LIBS
for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g`
do
  # Don't even attempt the hair of trying to link an X program!
  for ac_extension in a so sl; do
    if test -r "$ac_dir/libX11.$ac_extension"; then
      ac_x_libraries=$ac_dir
      break 2
    fi
  done
done
fi

rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
      conftest$ac_exeext conftest.$ac_ext
fi # $ac_x_libraries = no

case $ac_x_includes,$ac_x_libraries in #(
  no,* | *,no | *\'*)
    # Didn't find X, or a directory has "'" in its name.
    ac_cv_have_x="have_x=no";; #(
  *)
    # Record where we found X for the cache.
    ac_cv_have_x="have_x=yes\
	ac_x_includes='$ac_x_includes'\
	ac_x_libraries='$ac_x_libraries'"
esac
fi
;; #(
    *) have_x=yes;;
  esac
  eval "$ac_cv_have_x"
fi # $with_x != no

if test "$have_x" != yes; then
  { echo "$as_me:$LINENO: result: $have_x" >&5
echo "${ECHO_T}$have_x" >&6; }
  no_x=yes
else
  # If each of the values was on the command line, it overrides each guess.
  test "x$x_includes" = xNONE && x_includes=$ac_x_includes
  test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries
  # Update the cache value to reflect the command line values.
  ac_cv_have_x="have_x=yes\
	ac_x_includes='$x_includes'\
	ac_x_libraries='$x_libraries'"
  { echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5
echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6; }
fi

    if test x$opengl_prefix != x; then
      CFLAGS="$CFLAGS -I$opengl_prefix/include"
      LDFLAGS-"$LDFLAGS -L$opengl_prefix/lib"
    fi
    if test x$x_libraries != x; then
      LDFLAGS="$LDFLAGS -L$x_libraries"
    fi
    { echo "$as_me:$LINENO: checking for glGetError in -lGL" >&5
echo $ECHO_N "checking for glGetError in -lGL... $ECHO_C" >&6; }
if test "${ac_cv_lib_GL_glGetError+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-lGL  $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */

/* Override any GCC internal prototype to avoid an error.
   Use char because int might match the return type of a GCC
   builtin and then its argument prototype would still apply.  */
#ifdef __cplusplus
extern "C"
#endif
char glGetError ();
int
main ()
{
return glGetError ();
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_link") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && {
	 test -z "$ac_c_werror_flag" ||
	 test ! -s conftest.err
       } && test -s conftest$ac_exeext &&
       $as_test_x conftest$ac_exeext; then
  ac_cv_lib_GL_glGetError=yes
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

	ac_cv_lib_GL_glGetError=no
fi

rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
      conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:$LINENO: result: $ac_cv_lib_GL_glGetError" >&5
echo "${ECHO_T}$ac_cv_lib_GL_glGetError" >&6; }
if test $ac_cv_lib_GL_glGetError = yes; then
  found_opengl=yes
else
  found_opengl=no
fi

  fi

  { echo "$as_me:$LINENO: checking for OpenGL" >&5
echo $ECHO_N "checking for OpenGL... $ECHO_C" >&6; }
  if test x$enable_opengl != xno; then
    if test x$found_opengl = xyes; then
      LDFLAGS="$LDFLAGS -lGL"
      CFLAGS="$CFLAGS -D__OPENGL__"
      NFLAGS="$NFLAGS -D__OPENGL__"
      PSRFLAGS="$PSRFLAGS -D__OPENGL__"
      GL_DRAW="\$(PORT_D)/gl_draw.o"
    fi
    { echo "$as_me:$LINENO: result: $found_opengl" >&5
echo "${ECHO_T}$found_opengl" >&6; }
  else
    { echo "$as_me:$LINENO: result: disabled by user" >&5
echo "${ECHO_T}disabled by user" >&6; }
  fi
fi

# Check whether --enable-jma was given.
if test "${enable_jma+set}" = set; then
  enableval=$enable_jma;
else
  enable_jma=yes
fi

{ echo "$as_me:$LINENO: checking for JMA support" >&5
echo $ECHO_N "checking for JMA support... $ECHO_C" >&6; }
{ echo "$as_me:$LINENO: result: $enable_jma" >&5
echo "${ECHO_T}$enable_jma" >&6; }
if test x$enable_jma != xyes; then
  CFLAGS="$CFLAGS -DNO_JMA"
  NFLAGS="$NFLAGS -DNO_JMA"
  PSRFLAGS="$PSRFLAGS -DNO_JMA"
fi


{ echo "$as_me:$LINENO: checking for cpu info" >&5
echo $ECHO_N "checking for cpu info... $ECHO_C" >&6; }
# Check whether --enable-cpucheck was given.
if test "${enable_cpucheck+set}" = set; then
  enableval=$enable_cpucheck;
else
  enable_cpucheck=yes
fi


if test x$enable_cpucheck != xno; then
  if test "$cross_compiling" = yes; then
  { echo "$as_me:$LINENO: result: cross-compiling" >&5
echo "${ECHO_T}cross-compiling" >&6; }
  cpu_test=""
  { echo "$as_me:$LINENO: WARNING: You should use --target" >&5
echo "$as_me: WARNING: You should use --target" >&2;}
else
  cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */

#include <stdlib.h>

int main()
{
  int check;
  system("$CC -O3 -o tools/archopt tools/archopt.c");
  check = system("tools/archopt > conf.archchk");
  return((check) ? 1:0);
}

_ACEOF
rm -f conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_link") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
  { (case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_try") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  cpu_test=found
else
  echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

( exit $ac_status )
cpu_test=failed
fi
rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi



  if test x$cpu_test != x; then
    { echo "$as_me:$LINENO: result: $cpu_test" >&5
echo "${ECHO_T}$cpu_test" >&6; }
  fi
  if test x$cpu_test = xfound; then
    ARCH_INFO=$(<conf.archchk)
  fi
  rm -f conf.archchk tools/archopt

else
  { echo "$as_me:$LINENO: result: disabled by user" >&5
echo "${ECHO_T}disabled by user" >&6; }
fi


# Check whether --enable-debug was given.
if test "${enable_debug+set}" = set; then
  enableval=$enable_debug; debug=$enableval
else
  debug=no
fi

{ echo "$as_me:$LINENO: checking if you want gdb friendly executable" >&5
echo $ECHO_N "checking if you want gdb friendly executable... $ECHO_C" >&6; }
{ echo "$as_me:$LINENO: result: $debug" >&5
echo "${ECHO_T}$debug" >&6; }
if test x$debug = xyes; then
  ZSNESEXE="zsnesd"
  PSR_TEMP=""
  CFLAGS="$CFLAGS -Wall -W -DDEBUG -O0 -fno-omit-frame-pointer -gstabs3"
  NFLAGS="$NFLAGS -DDEBUG -g -F stabs -s -O0"
else
  ZSNESEXE="zsnes"
  PSR_TEMP="	rm -f t_\$*.c"

  CFLAGSBAK="$CFLAGS"

  { echo "$as_me:$LINENO: checking which cpu architecture to optimize for" >&5
echo $ECHO_N "checking which cpu architecture to optimize for... $ECHO_C" >&6; }
  if test x$force_arch != x; then
    CFLAGS="$CFLAGS -march=$force_arch"
    cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */

int
main ()
{

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_compile") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && {
	 test -z "$ac_c_werror_flag" ||
	 test ! -s conftest.err
       } && test -s conftest.$ac_objext; then
  { echo "$as_me:$LINENO: result: forcing $force_arch" >&5
echo "${ECHO_T}forcing $force_arch" >&6; }
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

	{ echo "$as_me:$LINENO: result: $force_arch ??" >&5
echo "${ECHO_T}$force_arch ??" >&6; }
    { echo "$as_me:$LINENO: WARNING: incorrect force_arch parameter" >&5
echo "$as_me: WARNING: incorrect force_arch parameter" >&2;}
    force_arch=""
    CFLAGS="$CFLAGSBAK"
    { echo "$as_me:$LINENO: checking for autodetected architecture" >&5
echo $ECHO_N "checking for autodetected architecture... $ECHO_C" >&6; }
fi

rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
  else
    if test x$ARCH_INFO = x; then
      case x$target in
        i686-*-*)
          { echo "$as_me:$LINENO: result: guessing i686" >&5
echo "${ECHO_T}guessing i686" >&6; }
          CFLAGS="$CFLAGS -march=i686"
          ;;
        i586-*-*)
          { echo "$as_me:$LINENO: result: guessing i586" >&5
echo "${ECHO_T}guessing i586" >&6; }
          CFLAGS="$CFLAGS -march=i586"
          ;;
        i486-*-*)
          { echo "$as_me:$LINENO: result: guessing i486" >&5
echo "${ECHO_T}guessing i486" >&6; }
          CFLAGS="$CFLAGS -march=i486"
          ;;
        *)
          { echo "$as_me:$LINENO: result: guessing i386" >&5
echo "${ECHO_T}guessing i386" >&6; }
          CFLAGS="$CFLAGS -march=i386"
          { echo "$as_me:$LINENO: WARNING: This is not what you want, use --target or force-arch" >&5
echo "$as_me: WARNING: This is not what you want, use --target or force-arch" >&2;}
          ;;
      esac
    else
      { echo "$as_me:$LINENO: result: $ARCH_INFO" >&5
echo "${ECHO_T}$ARCH_INFO" >&6; }
      CFLAGS="$CFLAGS -march=$ARCH_INFO"
    fi
  fi

  # Check whether --enable-release was given.
if test "${enable_release+set}" = set; then
  enableval=$enable_release; release=$enableval
else
  release=no
fi

  { echo "$as_me:$LINENO: checking if you want crazy optimizations" >&5
echo $ECHO_N "checking if you want crazy optimizations... $ECHO_C" >&6; }
  { echo "$as_me:$LINENO: result: $release" >&5
echo "${ECHO_T}$release" >&6; }
  if test x$release = xyes; then
    if test x$force_arch = x; then
      { echo "$as_me:$LINENO: WARNING: If you intend to distribute this binary, make sure you use force_arch and set to i586 (or whichever CPU Arch you intend for)" >&5
echo "$as_me: WARNING: If you intend to distribute this binary, make sure you use force_arch and set to i586 (or whichever CPU Arch you intend for)" >&2;}
    fi
    CFLAGS="$CFLAGS -O3 -fomit-frame-pointer -fprefetch-loop-arrays -fforce-addr $STRIP -D__RELEASE__"
    NFLAGS="$NFLAGS -O99999999 -D__RELEASE__"
  else
    CFLAGS="$CFLAGS -O3 -fomit-frame-pointer $STRIP"
    NFLAGS="$NFLAGS -O1"
  fi
fi
CXXFLAGS="$CFLAGS -fno-rtti"

if test x$enable_jma != xno; then
  JMA_FILES="\$(JMA_D)/7zlzma.o \$(JMA_D)/crc32.o \$(JMA_D)/iiostrm.o\
	\$(JMA_D)/inbyte.o \$(JMA_D)/jma.o \$(JMA_D)/lzma.o\
	\$(JMA_D)/lzmadec.o \$(JMA_D)/winout.o \$(JMA_D)/zsnesjma.o"
  ZC="$CXX"
  ZCFLAGS="$CXXFLAGS"
else
  JMA_FILES=""
  ZC="$CC"
  ZCFLAGS="$CFLAGS"
fi

{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
if test "${ac_cv_path_GREP+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  # Extract the first word of "grep ggrep" to use in msg output
if test -z "$GREP"; then
set dummy grep ggrep; ac_prog_name=$2
if test "${ac_cv_path_GREP+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_path_GREP_found=false
# Loop through the user's path and test for each of PROGNAME-LIST
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_prog in grep ggrep; do
  for ac_exec_ext in '' $ac_executable_extensions; do
    ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
    { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
    # Check for GNU ac_path_GREP and select it if it is found.
  # Check for GNU $ac_path_GREP
case `"$ac_path_GREP" --version 2>&1` in
*GNU*)
  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
*)
  ac_count=0
  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
  while :
  do
    cat "conftest.in" "conftest.in" >"conftest.tmp"
    mv "conftest.tmp" "conftest.in"
    cp "conftest.in" "conftest.nl"
    echo 'GREP' >> "conftest.nl"
    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
    ac_count=`expr $ac_count + 1`
    if test $ac_count -gt ${ac_path_GREP_max-0}; then
      # Best one so far, save it but keep looking for a better one
      ac_cv_path_GREP="$ac_path_GREP"
      ac_path_GREP_max=$ac_count
    fi
    # 10*(2^10) chars as input seems more than enough
    test $ac_count -gt 10 && break
  done
  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
esac


    $ac_path_GREP_found && break 3
  done
done

done
IFS=$as_save_IFS


fi

GREP="$ac_cv_path_GREP"
if test -z "$GREP"; then
  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
   { (exit 1); exit 1; }; }
fi

else
  ac_cv_path_GREP=$GREP
fi


fi
{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
 GREP="$ac_cv_path_GREP"


{ echo "$as_me:$LINENO: checking for egrep" >&5
echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
if test "${ac_cv_path_EGREP+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
   then ac_cv_path_EGREP="$GREP -E"
   else
     # Extract the first word of "egrep" to use in msg output
if test -z "$EGREP"; then
set dummy egrep; ac_prog_name=$2
if test "${ac_cv_path_EGREP+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_path_EGREP_found=false
# Loop through the user's path and test for each of PROGNAME-LIST
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_prog in egrep; do
  for ac_exec_ext in '' $ac_executable_extensions; do
    ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
    { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
    # Check for GNU ac_path_EGREP and select it if it is found.
  # Check for GNU $ac_path_EGREP
case `"$ac_path_EGREP" --version 2>&1` in
*GNU*)
  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
*)
  ac_count=0
  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
  while :
  do
    cat "conftest.in" "conftest.in" >"conftest.tmp"
    mv "conftest.tmp" "conftest.in"
    cp "conftest.in" "conftest.nl"
    echo 'EGREP' >> "conftest.nl"
    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
    ac_count=`expr $ac_count + 1`
    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
      # Best one so far, save it but keep looking for a better one
      ac_cv_path_EGREP="$ac_path_EGREP"
      ac_path_EGREP_max=$ac_count
    fi
    # 10*(2^10) chars as input seems more than enough
    test $ac_count -gt 10 && break
  done
  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
esac


    $ac_path_EGREP_found && break 3
  done
done

done
IFS=$as_save_IFS


fi

EGREP="$ac_cv_path_EGREP"
if test -z "$EGREP"; then
  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
   { (exit 1); exit 1; }; }
fi

else
  ac_cv_path_EGREP=$EGREP
fi


   fi
fi
{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
 EGREP="$ac_cv_path_EGREP"


{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
if test "${ac_cv_header_stdc+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
#include <stdlib.h>
#include <stdarg.h>
#include <string.h>
#include <float.h>

int
main ()
{

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_compile") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && {
	 test -z "$ac_c_werror_flag" ||
	 test ! -s conftest.err
       } && test -s conftest.$ac_objext; then
  ac_cv_header_stdc=yes
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

	ac_cv_header_stdc=no
fi

rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext

if test $ac_cv_header_stdc = yes; then
  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
  cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
#include <string.h>

_ACEOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  $EGREP "memchr" >/dev/null 2>&1; then
  :
else
  ac_cv_header_stdc=no
fi
rm -f conftest*

fi

if test $ac_cv_header_stdc = yes; then
  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
  cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
#include <stdlib.h>

_ACEOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  $EGREP "free" >/dev/null 2>&1; then
  :
else
  ac_cv_header_stdc=no
fi
rm -f conftest*

fi

if test $ac_cv_header_stdc = yes; then
  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
  if test "$cross_compiling" = yes; then
  :
else
  cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
#include <ctype.h>
#include <stdlib.h>
#if ((' ' & 0x0FF) == 0x020)
# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
#else
# define ISLOWER(c) \
		   (('a' <= (c) && (c) <= 'i') \
		     || ('j' <= (c) && (c) <= 'r') \
		     || ('s' <= (c) && (c) <= 'z'))
# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
#endif

#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
int
main ()
{
  int i;
  for (i = 0; i < 256; i++)
    if (XOR (islower (i), ISLOWER (i))
	|| toupper (i) != TOUPPER (i))
      return 2;
  return 0;
}
_ACEOF
rm -f conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_link") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
  { (case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_try") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  :
else
  echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

( exit $ac_status )
ac_cv_header_stdc=no
fi
rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi


fi
fi
{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
if test $ac_cv_header_stdc = yes; then

cat >>confdefs.h <<\_ACEOF
#define STDC_HEADERS 1
_ACEOF

fi

# On IRIX 5.3, sys/types and inttypes.h are conflicting.









for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
		  inttypes.h stdint.h unistd.h
do
as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
{ echo "$as_me:$LINENO: checking for $ac_header" >&5
echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
$ac_includes_default

#include <$ac_header>
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_compile") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && {
	 test -z "$ac_c_werror_flag" ||
	 test ! -s conftest.err
       } && test -s conftest.$ac_objext; then
  eval "$as_ac_Header=yes"
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

	eval "$as_ac_Header=no"
fi

rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
ac_res=`eval echo '${'$as_ac_Header'}'`
	       { echo "$as_me:$LINENO: result: $ac_res" >&5
echo "${ECHO_T}$ac_res" >&6; }
if test `eval echo '${'$as_ac_Header'}'` = yes; then
  cat >>confdefs.h <<_ACEOF
#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF

fi

done


{ echo "$as_me:$LINENO: checking whether sys/types.h defines makedev" >&5
echo $ECHO_N "checking whether sys/types.h defines makedev... $ECHO_C" >&6; }
if test "${ac_cv_header_sys_types_h_makedev+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
#include <sys/types.h>
int
main ()
{
return makedev(0, 0);
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_link") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && {
	 test -z "$ac_c_werror_flag" ||
	 test ! -s conftest.err
       } && test -s conftest$ac_exeext &&
       $as_test_x conftest$ac_exeext; then
  ac_cv_header_sys_types_h_makedev=yes
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

	ac_cv_header_sys_types_h_makedev=no
fi

rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
      conftest$ac_exeext conftest.$ac_ext

fi
{ echo "$as_me:$LINENO: result: $ac_cv_header_sys_types_h_makedev" >&5
echo "${ECHO_T}$ac_cv_header_sys_types_h_makedev" >&6; }

if test $ac_cv_header_sys_types_h_makedev = no; then
if test "${ac_cv_header_sys_mkdev_h+set}" = set; then
  { echo "$as_me:$LINENO: checking for sys/mkdev.h" >&5
echo $ECHO_N "checking for sys/mkdev.h... $ECHO_C" >&6; }
if test "${ac_cv_header_sys_mkdev_h+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
fi
{ echo "$as_me:$LINENO: result: $ac_cv_header_sys_mkdev_h" >&5
echo "${ECHO_T}$ac_cv_header_sys_mkdev_h" >&6; }
else
  # Is the header compilable?
{ echo "$as_me:$LINENO: checking sys/mkdev.h usability" >&5
echo $ECHO_N "checking sys/mkdev.h usability... $ECHO_C" >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
$ac_includes_default
#include <sys/mkdev.h>
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_compile") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && {
	 test -z "$ac_c_werror_flag" ||
	 test ! -s conftest.err
       } && test -s conftest.$ac_objext; then
  ac_header_compiler=yes
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

	ac_header_compiler=no
fi

rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
echo "${ECHO_T}$ac_header_compiler" >&6; }

# Is the header present?
{ echo "$as_me:$LINENO: checking sys/mkdev.h presence" >&5
echo $ECHO_N "checking sys/mkdev.h presence... $ECHO_C" >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
#include <sys/mkdev.h>
_ACEOF
if { (ac_try="$ac_cpp conftest.$ac_ext"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } >/dev/null && {
	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
	 test ! -s conftest.err
       }; then
  ac_header_preproc=yes
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

  ac_header_preproc=no
fi

rm -f conftest.err conftest.$ac_ext
{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
echo "${ECHO_T}$ac_header_preproc" >&6; }

# So?  What about this header?
case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
  yes:no: )
    { echo "$as_me:$LINENO: WARNING: sys/mkdev.h: accepted by the compiler, rejected by the preprocessor!" >&5
echo "$as_me: WARNING: sys/mkdev.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
    { echo "$as_me:$LINENO: WARNING: sys/mkdev.h: proceeding with the compiler's result" >&5
echo "$as_me: WARNING: sys/mkdev.h: proceeding with the compiler's result" >&2;}
    ac_header_preproc=yes
    ;;
  no:yes:* )
    { echo "$as_me:$LINENO: WARNING: sys/mkdev.h: present but cannot be compiled" >&5
echo "$as_me: WARNING: sys/mkdev.h: present but cannot be compiled" >&2;}
    { echo "$as_me:$LINENO: WARNING: sys/mkdev.h:     check for missing prerequisite headers?" >&5
echo "$as_me: WARNING: sys/mkdev.h:     check for missing prerequisite headers?" >&2;}
    { echo "$as_me:$LINENO: WARNING: sys/mkdev.h: see the Autoconf documentation" >&5
echo "$as_me: WARNING: sys/mkdev.h: see the Autoconf documentation" >&2;}
    { echo "$as_me:$LINENO: WARNING: sys/mkdev.h:     section \"Present But Cannot Be Compiled\"" >&5
echo "$as_me: WARNING: sys/mkdev.h:     section \"Present But Cannot Be Compiled\"" >&2;}
    { echo "$as_me:$LINENO: WARNING: sys/mkdev.h: proceeding with the preprocessor's result" >&5
echo "$as_me: WARNING: sys/mkdev.h: proceeding with the preprocessor's result" >&2;}
    { echo "$as_me:$LINENO: WARNING: sys/mkdev.h: in the future, the compiler will take precedence" >&5
echo "$as_me: WARNING: sys/mkdev.h: in the future, the compiler will take precedence" >&2;}

    ;;
esac
{ echo "$as_me:$LINENO: checking for sys/mkdev.h" >&5
echo $ECHO_N "checking for sys/mkdev.h... $ECHO_C" >&6; }
if test "${ac_cv_header_sys_mkdev_h+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_cv_header_sys_mkdev_h=$ac_header_preproc
fi
{ echo "$as_me:$LINENO: result: $ac_cv_header_sys_mkdev_h" >&5
echo "${ECHO_T}$ac_cv_header_sys_mkdev_h" >&6; }

fi
if test $ac_cv_header_sys_mkdev_h = yes; then

cat >>confdefs.h <<\_ACEOF
#define MAJOR_IN_MKDEV 1
_ACEOF

fi



  if test $ac_cv_header_sys_mkdev_h = no; then
    if test "${ac_cv_header_sys_sysmacros_h+set}" = set; then
  { echo "$as_me:$LINENO: checking for sys/sysmacros.h" >&5
echo $ECHO_N "checking for sys/sysmacros.h... $ECHO_C" >&6; }
if test "${ac_cv_header_sys_sysmacros_h+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
fi
{ echo "$as_me:$LINENO: result: $ac_cv_header_sys_sysmacros_h" >&5
echo "${ECHO_T}$ac_cv_header_sys_sysmacros_h" >&6; }
else
  # Is the header compilable?
{ echo "$as_me:$LINENO: checking sys/sysmacros.h usability" >&5
echo $ECHO_N "checking sys/sysmacros.h usability... $ECHO_C" >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
$ac_includes_default
#include <sys/sysmacros.h>
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_compile") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && {
	 test -z "$ac_c_werror_flag" ||
	 test ! -s conftest.err
       } && test -s conftest.$ac_objext; then
  ac_header_compiler=yes
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

	ac_header_compiler=no
fi

rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
echo "${ECHO_T}$ac_header_compiler" >&6; }

# Is the header present?
{ echo "$as_me:$LINENO: checking sys/sysmacros.h presence" >&5
echo $ECHO_N "checking sys/sysmacros.h presence... $ECHO_C" >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
#include <sys/sysmacros.h>
_ACEOF
if { (ac_try="$ac_cpp conftest.$ac_ext"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } >/dev/null && {
	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
	 test ! -s conftest.err
       }; then
  ac_header_preproc=yes
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

  ac_header_preproc=no
fi

rm -f conftest.err conftest.$ac_ext
{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
echo "${ECHO_T}$ac_header_preproc" >&6; }

# So?  What about this header?
case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
  yes:no: )
    { echo "$as_me:$LINENO: WARNING: sys/sysmacros.h: accepted by the compiler, rejected by the preprocessor!" >&5
echo "$as_me: WARNING: sys/sysmacros.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
    { echo "$as_me:$LINENO: WARNING: sys/sysmacros.h: proceeding with the compiler's result" >&5
echo "$as_me: WARNING: sys/sysmacros.h: proceeding with the compiler's result" >&2;}
    ac_header_preproc=yes
    ;;
  no:yes:* )
    { echo "$as_me:$LINENO: WARNING: sys/sysmacros.h: present but cannot be compiled" >&5
echo "$as_me: WARNING: sys/sysmacros.h: present but cannot be compiled" >&2;}
    { echo "$as_me:$LINENO: WARNING: sys/sysmacros.h:     check for missing prerequisite headers?" >&5
echo "$as_me: WARNING: sys/sysmacros.h:     check for missing prerequisite headers?" >&2;}
    { echo "$as_me:$LINENO: WARNING: sys/sysmacros.h: see the Autoconf documentation" >&5
echo "$as_me: WARNING: sys/sysmacros.h: see the Autoconf documentation" >&2;}
    { echo "$as_me:$LINENO: WARNING: sys/sysmacros.h:     section \"Present But Cannot Be Compiled\"" >&5
echo "$as_me: WARNING: sys/sysmacros.h:     section \"Present But Cannot Be Compiled\"" >&2;}
    { echo "$as_me:$LINENO: WARNING: sys/sysmacros.h: proceeding with the preprocessor's result" >&5
echo "$as_me: WARNING: sys/sysmacros.h: proceeding with the preprocessor's result" >&2;}
    { echo "$as_me:$LINENO: WARNING: sys/sysmacros.h: in the future, the compiler will take precedence" >&5
echo "$as_me: WARNING: sys/sysmacros.h: in the future, the compiler will take precedence" >&2;}

    ;;
esac
{ echo "$as_me:$LINENO: checking for sys/sysmacros.h" >&5
echo $ECHO_N "checking for sys/sysmacros.h... $ECHO_C" >&6; }
if test "${ac_cv_header_sys_sysmacros_h+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_cv_header_sys_sysmacros_h=$ac_header_preproc
fi
{ echo "$as_me:$LINENO: result: $ac_cv_header_sys_sysmacros_h" >&5
echo "${ECHO_T}$ac_cv_header_sys_sysmacros_h" >&6; }

fi
if test $ac_cv_header_sys_sysmacros_h = yes; then

cat >>confdefs.h <<\_ACEOF
#define MAJOR_IN_SYSMACROS 1
_ACEOF

fi


  fi
fi















ac_config_files="$ac_config_files Makefile"

touch -t 198001010000 makefile.dep

cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs, see configure's option --config-cache.
# It is not useful on other systems.  If it contains results you don't
# want to keep, you may remove or edit it.
#
# config.status only pays attention to the cache file if you give it
# the --recheck option to rerun configure.
#
# `ac_cv_env_foo' variables (set or unset) will be overridden when
# loading this file, other *unset* `ac_cv_foo' will be assigned the
# following values.

_ACEOF

# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, we kill variables containing newlines.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(
  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
    eval ac_val=\$$ac_var
    case $ac_val in #(
    *${as_nl}*)
      case $ac_var in #(
      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
      esac
      case $ac_var in #(
      _ | IFS | as_nl) ;; #(
      *) $as_unset $ac_var ;;
      esac ;;
    esac
  done

  (set) 2>&1 |
    case $as_nl`(ac_space=' '; set) 2>&1` in #(
    *${as_nl}ac_space=\ *)
      # `set' does not quote correctly, so add quotes (double-quote
      # substitution turns \\\\ into \\, and sed turns \\ into \).
      sed -n \
	"s/'/'\\\\''/g;
	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
      ;; #(
    *)
      # `set' quotes correctly as required by POSIX, so do not add quotes.
      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
      ;;
    esac |
    sort
) |
  sed '
     /^ac_cv_env_/b end
     t clear
     :clear
     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
     t end
     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
     :end' >>confcache
if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
  if test -w "$cache_file"; then
    test "x$cache_file" != "x/dev/null" &&
      { echo "$as_me:$LINENO: updating cache $cache_file" >&5
echo "$as_me: updating cache $cache_file" >&6;}
    cat confcache >$cache_file
  else
    { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
echo "$as_me: not updating unwritable cache $cache_file" >&6;}
  fi
fi
rm -f confcache

test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

DEFS=-DHAVE_CONFIG_H

ac_libobjs=
ac_ltlibobjs=
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
  # 1. Remove the extension, and $U if already installed.
  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
  ac_i=`echo "$ac_i" | sed "$ac_script"`
  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
  #    will be set to the directory where LIBOBJS objects are built.
  ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
  ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
done
LIBOBJS=$ac_libobjs

LTLIBOBJS=$ac_ltlibobjs



: ${CONFIG_STATUS=./config.status}
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
echo "$as_me: creating $CONFIG_STATUS" >&6;}
cat >$CONFIG_STATUS <<_ACEOF
#! $SHELL
# Generated by $as_me.
# Run this file to recreate the current configuration.
# Compiler output produced by configure, useful for debugging
# configure, is in config.log if it exists.

debug=false
ac_cs_recheck=false
ac_cs_silent=false
SHELL=\${CONFIG_SHELL-$SHELL}
_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF
## --------------------- ##
## M4sh Initialization.  ##
## --------------------- ##

# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
  emulate sh
  NULLCMD=:
  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
  # is contrary to our usage.  Disable this feature.
  alias -g '${1+"$@"}'='"$@"'
  setopt NO_GLOB_SUBST
else
  case `(set -o) 2>/dev/null` in
  *posix*) set -o posix ;;
esac

fi




# PATH needs CR
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits

# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
  echo "#! /bin/sh" >conf$$.sh
  echo  "exit 0"   >>conf$$.sh
  chmod +x conf$$.sh
  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
    PATH_SEPARATOR=';'
  else
    PATH_SEPARATOR=:
  fi
  rm -f conf$$.sh
fi

# Support unset when possible.
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
  as_unset=unset
else
  as_unset=false
fi


# IFS
# We need space, tab and new line, in precisely that order.  Quoting is
# there to prevent editors from complaining about space-tab.
# (If _AS_PATH_WALK were called with IFS unset, it would disable word
# splitting by setting IFS to empty value.)
as_nl='
'
IFS=" ""	$as_nl"

# Find who we are.  Look in the path if we contain no directory separator.
case $0 in
  *[\\/]* ) as_myself=$0 ;;
  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
done
IFS=$as_save_IFS

     ;;
esac
# We did not find ourselves, most probably we were run as `sh COMMAND'
# in which case we are not to be found in the path.
if test "x$as_myself" = x; then
  as_myself=$0
fi
if test ! -f "$as_myself"; then
  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
  { (exit 1); exit 1; }
fi

# Work around bugs in pre-3.0 UWIN ksh.
for as_var in ENV MAIL MAILPATH
do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
done
PS1='$ '
PS2='> '
PS4='+ '

# NLS nuisances.
for as_var in \
  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
  LC_TELEPHONE LC_TIME
do
  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
    eval $as_var=C; export $as_var
  else
    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
  fi
done

# Required to use basename.
if expr a : '\(a\)' >/dev/null 2>&1 &&
   test "X`expr 00001 : '.*\(...\)'`" = X001; then
  as_expr=expr
else
  as_expr=false
fi

if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
  as_basename=basename
else
  as_basename=false
fi


# Name of the executable.
as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
	 X"$0" : 'X\(//\)$' \| \
	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
echo X/"$0" |
    sed '/^.*\/\([^/][^/]*\)\/*$/{
	    s//\1/
	    q
	  }
	  /^X\/\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\/\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`

# CDPATH.
$as_unset CDPATH



  as_lineno_1=$LINENO
  as_lineno_2=$LINENO
  test "x$as_lineno_1" != "x$as_lineno_2" &&
  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {

  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
  # uniformly replaced by the line number.  The first 'sed' inserts a
  # line-number line after each line using $LINENO; the second 'sed'
  # does the real work.  The second script uses 'N' to pair each
  # line-number line with the line containing $LINENO, and appends
  # trailing '-' during substitution so that $LINENO is not a special
  # case at line end.
  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
  # scripts with optimization help from Paolo Bonzini.  Blame Lee
  # E. McMahon (1931-1989) for sed's syntax.  :-)
  sed -n '
    p
    /[$]LINENO/=
  ' <$as_myself |
    sed '
      s/[$]LINENO.*/&-/
      t lineno
      b
      :lineno
      N
      :loop
      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
      t loop
      s/-\n.*//
    ' >$as_me.lineno &&
  chmod +x "$as_me.lineno" ||
    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
   { (exit 1); exit 1; }; }

  # Don't try to exec as it changes $[0], causing all sort of problems
  # (the dirname of $[0] is not the place where we might find the
  # original and so on.  Autoconf is especially sensitive to this).
  . "./$as_me.lineno"
  # Exit status is that of the last command.
  exit
}


if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
  as_dirname=dirname
else
  as_dirname=false
fi

ECHO_C= ECHO_N= ECHO_T=
case `echo -n x` in
-n*)
  case `echo 'x\c'` in
  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
  *)   ECHO_C='\c';;
  esac;;
*)
  ECHO_N='-n';;
esac

if expr a : '\(a\)' >/dev/null 2>&1 &&
   test "X`expr 00001 : '.*\(...\)'`" = X001; then
  as_expr=expr
else
  as_expr=false
fi

rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
  rm -f conf$$.dir/conf$$.file
else
  rm -f conf$$.dir
  mkdir conf$$.dir
fi
echo >conf$$.file
if ln -s conf$$.file conf$$ 2>/dev/null; then
  as_ln_s='ln -s'
  # ... but there are two gotchas:
  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
  # In both cases, we have to default to `cp -p'.
  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
    as_ln_s='cp -p'
elif ln conf$$.file conf$$ 2>/dev/null; then
  as_ln_s=ln
else
  as_ln_s='cp -p'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null

if mkdir -p . 2>/dev/null; then
  as_mkdir_p=:
else
  test -d ./-p && rmdir ./-p
  as_mkdir_p=false
fi

if test -x / >/dev/null 2>&1; then
  as_test_x='test -x'
else
  if ls -dL / >/dev/null 2>&1; then
    as_ls_L_option=L
  else
    as_ls_L_option=
  fi
  as_test_x='
    eval sh -c '\''
      if test -d "$1"; then
        test -d "$1/.";
      else
	case $1 in
        -*)set "./$1";;
	esac;
	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
	???[sx]*):;;*)false;;esac;fi
    '\'' sh
  '
fi
as_executable_p=$as_test_x

# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"

# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"


exec 6>&1

# Save the log message, to keep $[0] and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
This file was extended by $as_me, which was
generated by GNU Autoconf 2.61.  Invocation command line was

  CONFIG_FILES    = $CONFIG_FILES
  CONFIG_HEADERS  = $CONFIG_HEADERS
  CONFIG_LINKS    = $CONFIG_LINKS
  CONFIG_COMMANDS = $CONFIG_COMMANDS
  $ $0 $@

on `(hostname || uname -n) 2>/dev/null | sed 1q`
"

_ACEOF

cat >>$CONFIG_STATUS <<_ACEOF
# Files that config.status was made for.
config_files="$ac_config_files"
config_headers="$ac_config_headers"

_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF
ac_cs_usage="\
\`$as_me' instantiates files from templates according to the
current configuration.

Usage: $0 [OPTIONS] [FILE]...

  -h, --help       print this help, then exit
  -V, --version    print version number and configuration settings, then exit
  -q, --quiet      do not print progress messages
  -d, --debug      don't remove temporary files
      --recheck    update $as_me by reconfiguring in the same conditions
  --file=FILE[:TEMPLATE]
		   instantiate the configuration file FILE
  --header=FILE[:TEMPLATE]
		   instantiate the configuration header FILE

Configuration files:
$config_files

Configuration headers:
$config_headers

Report bugs to <bug-autoconf@xxxxxxx>."

_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
ac_cs_version="\\
config.status
configured by $0, generated by GNU Autoconf 2.61,
  with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"

Copyright (C) 2006 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."

ac_pwd='$ac_pwd'
srcdir='$srcdir'
INSTALL='$INSTALL'
_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF
# If no file are specified by the user, then we need to provide default
# value.  By we need to know if files were specified by the user.
ac_need_defaults=:
while test $# != 0
do
  case $1 in
  --*=*)
    ac_option=`expr "X$1" : 'X\([^=]*\)='`
    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
    ac_shift=:
    ;;
  *)
    ac_option=$1
    ac_optarg=$2
    ac_shift=shift
    ;;
  esac

  case $ac_option in
  # Handling of the options.
  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    ac_cs_recheck=: ;;
  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
    echo "$ac_cs_version"; exit ;;
  --debug | --debu | --deb | --de | --d | -d )
    debug=: ;;
  --file | --fil | --fi | --f )
    $ac_shift
    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
    ac_need_defaults=false;;
  --header | --heade | --head | --hea )
    $ac_shift
    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
    ac_need_defaults=false;;
  --he | --h)
    # Conflict between --help and --header
    { echo "$as_me: error: ambiguous option: $1
Try \`$0 --help' for more information." >&2
   { (exit 1); exit 1; }; };;
  --help | --hel | -h )
    echo "$ac_cs_usage"; exit ;;
  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
  | -silent | --silent | --silen | --sile | --sil | --si | --s)
    ac_cs_silent=: ;;

  # This is an error.
  -*) { echo "$as_me: error: unrecognized option: $1
Try \`$0 --help' for more information." >&2
   { (exit 1); exit 1; }; } ;;

  *) ac_config_targets="$ac_config_targets $1"
     ac_need_defaults=false ;;

  esac
  shift
done

ac_configure_extra_args=

if $ac_cs_silent; then
  exec 6>/dev/null
  ac_configure_extra_args="$ac_configure_extra_args --silent"
fi

_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
if \$ac_cs_recheck; then
  echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
  CONFIG_SHELL=$SHELL
  export CONFIG_SHELL
  exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
fi

_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
exec 5>>config.log
{
  echo
  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
## Running $as_me. ##
_ASBOX
  echo "$ac_log"
} >&5

_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF

# Handling of arguments.
for ac_config_target in $ac_config_targets
do
  case $ac_config_target in
    "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;

  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
   { (exit 1); exit 1; }; };;
  esac
done


# If the user did not use the arguments to specify the items to instantiate,
# then the envvar interface is used.  Set only those that are not.
# We use the long form for the default assignment because of an extremely
# bizarre bug on SunOS 4.1.3.
if $ac_need_defaults; then
  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
fi

# Have a temporary directory for convenience.  Make it in the build tree
# simply because there is no reason against having it here, and in addition,
# creating and moving files from /tmp can sometimes cause problems.
# Hook for its removal unless debugging.
# Note that there is a small window in which the directory will not be cleaned:
# after its creation but before its name has been assigned to `$tmp'.
$debug ||
{
  tmp=
  trap 'exit_status=$?
  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
' 0
  trap '{ (exit 1); exit 1; }' 1 2 13 15
}
# Create a (secure) tmp directory for tmp files.

{
  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
  test -n "$tmp" && test -d "$tmp"
}  ||
{
  tmp=./conf$$-$RANDOM
  (umask 077 && mkdir "$tmp")
} ||
{
   echo "$me: cannot create a temporary directory in ." >&2
   { (exit 1); exit 1; }
}

#
# Set up the sed scripts for CONFIG_FILES section.
#

# No need to generate the scripts if there are no CONFIG_FILES.
# This happens for instance when ./config.status config.h
if test -n "$CONFIG_FILES"; then

_ACEOF



ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
  cat >conf$$subs.sed <<_ACEOF
SHELL!$SHELL$ac_delim
PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
PACKAGE_NAME!$PACKAGE_NAME$ac_delim
PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
PACKAGE_STRING!$PACKAGE_STRING$ac_delim
PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
exec_prefix!$exec_prefix$ac_delim
prefix!$prefix$ac_delim
program_transform_name!$program_transform_name$ac_delim
bindir!$bindir$ac_delim
sbindir!$sbindir$ac_delim
libexecdir!$libexecdir$ac_delim
datarootdir!$datarootdir$ac_delim
datadir!$datadir$ac_delim
sysconfdir!$sysconfdir$ac_delim
sharedstatedir!$sharedstatedir$ac_delim
localstatedir!$localstatedir$ac_delim
includedir!$includedir$ac_delim
oldincludedir!$oldincludedir$ac_delim
docdir!$docdir$ac_delim
infodir!$infodir$ac_delim
htmldir!$htmldir$ac_delim
dvidir!$dvidir$ac_delim
pdfdir!$pdfdir$ac_delim
psdir!$psdir$ac_delim
libdir!$libdir$ac_delim
localedir!$localedir$ac_delim
mandir!$mandir$ac_delim
DEFS!$DEFS$ac_delim
ECHO_C!$ECHO_C$ac_delim
ECHO_N!$ECHO_N$ac_delim
ECHO_T!$ECHO_T$ac_delim
LIBS!$LIBS$ac_delim
build_alias!$build_alias$ac_delim
host_alias!$host_alias$ac_delim
target_alias!$target_alias$ac_delim
build!$build$ac_delim
build_cpu!$build_cpu$ac_delim
build_vendor!$build_vendor$ac_delim
build_os!$build_os$ac_delim
host!$host$ac_delim
host_cpu!$host_cpu$ac_delim
host_vendor!$host_vendor$ac_delim
host_os!$host_os$ac_delim
target!$target$ac_delim
target_cpu!$target_cpu$ac_delim
target_vendor!$target_vendor$ac_delim
target_os!$target_os$ac_delim
INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
INSTALL_DATA!$INSTALL_DATA$ac_delim
CC!$CC$ac_delim
CFLAGS!$CFLAGS$ac_delim
LDFLAGS!$LDFLAGS$ac_delim
CPPFLAGS!$CPPFLAGS$ac_delim
ac_ct_CC!$ac_ct_CC$ac_delim
EXEEXT!$EXEEXT$ac_delim
OBJEXT!$OBJEXT$ac_delim
CXX!$CXX$ac_delim
CXXFLAGS!$CXXFLAGS$ac_delim
ac_ct_CXX!$ac_ct_CXX$ac_delim
NASMPATH!$NASMPATH$ac_delim
SDL_CONFIG!$SDL_CONFIG$ac_delim
SDL_CFLAGS!$SDL_CFLAGS$ac_delim
SDL_LIBS!$SDL_LIBS$ac_delim
ZLIB_CFLAGS!$ZLIB_CFLAGS$ac_delim
ZLIB_VERSION!$ZLIB_VERSION$ac_delim
ZLIB_LIBS!$ZLIB_LIBS$ac_delim
LIBPNG_CFLAGS!$LIBPNG_CFLAGS$ac_delim
LIBPNG_VERSION!$LIBPNG_VERSION$ac_delim
LIBPNG_LIBS!$LIBPNG_LIBS$ac_delim
XMKMF!$XMKMF$ac_delim
CPP!$CPP$ac_delim
ARCH_INFO!$ARCH_INFO$ac_delim
force_arch!$force_arch$ac_delim
GREP!$GREP$ac_delim
EGREP!$EGREP$ac_delim
VERSION!$VERSION$ac_delim
ZC!$ZC$ac_delim
ZCFLAGS!$ZCFLAGS$ac_delim
PSRFLAGS!$PSRFLAGS$ac_delim
NFLAGS!$NFLAGS$ac_delim
ZSNESEXE!$ZSNESEXE$ac_delim
GL_DRAW!$GL_DRAW$ac_delim
JMA_FILES!$JMA_FILES$ac_delim
MMLIB_FILES!$MMLIB_FILES$ac_delim
DEBUGGER_FILES!$DEBUGGER_FILES$ac_delim
PSR_TEMP!$PSR_TEMP$ac_delim
LIBOBJS!$LIBOBJS$ac_delim
LTLIBOBJS!$LTLIBOBJS$ac_delim
_ACEOF

  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 91; then
    break
  elif $ac_last_try; then
    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
   { (exit 1); exit 1; }; }
  else
    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
  fi
done

ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
if test -n "$ac_eof"; then
  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
  ac_eof=`expr $ac_eof + 1`
fi

cat >>$CONFIG_STATUS <<_ACEOF
cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
_ACEOF
sed '
s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
s/^/s,@/; s/!/@,|#_!!_#|/
:n
t n
s/'"$ac_delim"'$/,g/; t
s/$/\\/; p
N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
' >>$CONFIG_STATUS <conf$$subs.sed
rm -f conf$$subs.sed
cat >>$CONFIG_STATUS <<_ACEOF
:end
s/|#_!!_#|//g
CEOF$ac_eof
_ACEOF


# VPATH may cause trouble with some makes, so we remove $(srcdir),
# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
# trailing colons and then remove the whole line if VPATH becomes empty
# (actually we leave an empty line to preserve line numbers).
if test "x$srcdir" = x.; then
  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
s/:*\$(srcdir):*/:/
s/:*\${srcdir}:*/:/
s/:*@srcdir@:*/:/
s/^\([^=]*=[	 ]*\):*/\1/
s/:*$//
s/^[^=]*=[	 ]*$//
}'
fi

cat >>$CONFIG_STATUS <<\_ACEOF
fi # test -n "$CONFIG_FILES"


for ac_tag in  :F $CONFIG_FILES  :H $CONFIG_HEADERS
do
  case $ac_tag in
  :[FHLC]) ac_mode=$ac_tag; continue;;
  esac
  case $ac_mode$ac_tag in
  :[FHL]*:*);;
  :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
echo "$as_me: error: Invalid tag $ac_tag." >&2;}
   { (exit 1); exit 1; }; };;
  :[FH]-) ac_tag=-:-;;
  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
  esac
  ac_save_IFS=$IFS
  IFS=:
  set x $ac_tag
  IFS=$ac_save_IFS
  shift
  ac_file=$1
  shift

  case $ac_mode in
  :L) ac_source=$1;;
  :[FH])
    ac_file_inputs=
    for ac_f
    do
      case $ac_f in
      -) ac_f="$tmp/stdin";;
      *) # Look for the file first in the build tree, then in the source tree
	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
	 # because $ac_f cannot contain `:'.
	 test -f "$ac_f" ||
	   case $ac_f in
	   [\\/$]*) false;;
	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
	   esac ||
	   { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
echo "$as_me: error: cannot find input file: $ac_f" >&2;}
   { (exit 1); exit 1; }; };;
      esac
      ac_file_inputs="$ac_file_inputs $ac_f"
    done

    # Let's still pretend it is `configure' which instantiates (i.e., don't
    # use $as_me), people would be surprised to read:
    #    /* config.h.  Generated by config.status.  */
    configure_input="Generated from "`IFS=:
	  echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
    if test x"$ac_file" != x-; then
      configure_input="$ac_file.  $configure_input"
      { echo "$as_me:$LINENO: creating $ac_file" >&5
echo "$as_me: creating $ac_file" >&6;}
    fi

    case $ac_tag in
    *:-:* | *:-) cat >"$tmp/stdin";;
    esac
    ;;
  esac

  ac_dir=`$as_dirname -- "$ac_file" ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$ac_file" : 'X\(//\)[^/]' \| \
	 X"$ac_file" : 'X\(//\)$' \| \
	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$ac_file" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)[^/].*/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`
  { as_dir="$ac_dir"
  case $as_dir in #(
  -*) as_dir=./$as_dir;;
  esac
  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
    as_dirs=
    while :; do
      case $as_dir in #(
      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
      *) as_qdir=$as_dir;;
      esac
      as_dirs="'$as_qdir' $as_dirs"
      as_dir=`$as_dirname -- "$as_dir" ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$as_dir" : 'X\(//\)[^/]' \| \
	 X"$as_dir" : 'X\(//\)$' \| \
	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$as_dir" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)[^/].*/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`
      test -d "$as_dir" && break
    done
    test -z "$as_dirs" || eval "mkdir $as_dirs"
  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
echo "$as_me: error: cannot create directory $as_dir" >&2;}
   { (exit 1); exit 1; }; }; }
  ac_builddir=.

case "$ac_dir" in
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
*)
  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
  # A ".." for each directory in $ac_dir_suffix.
  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
  case $ac_top_builddir_sub in
  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
  esac ;;
esac
ac_abs_top_builddir=$ac_pwd
ac_abs_builddir=$ac_pwd$ac_dir_suffix
# for backward compatibility:
ac_top_builddir=$ac_top_build_prefix

case $srcdir in
  .)  # We are building in place.
    ac_srcdir=.
    ac_top_srcdir=$ac_top_builddir_sub
    ac_abs_top_srcdir=$ac_pwd ;;
  [\\/]* | ?:[\\/]* )  # Absolute name.
    ac_srcdir=$srcdir$ac_dir_suffix;
    ac_top_srcdir=$srcdir
    ac_abs_top_srcdir=$srcdir ;;
  *) # Relative name.
    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
    ac_top_srcdir=$ac_top_build_prefix$srcdir
    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix


  case $ac_mode in
  :F)
  #
  # CONFIG_FILE
  #

  case $INSTALL in
  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
  esac
_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF
# If the template does not know about datarootdir, expand it.
# FIXME: This hack should be removed a few years after 2.60.
ac_datarootdir_hack=; ac_datarootdir_seen=

case `sed -n '/datarootdir/ {
  p
  q
}
/@datadir@/p
/@docdir@/p
/@infodir@/p
/@localedir@/p
/@mandir@/p
' $ac_file_inputs` in
*datarootdir*) ac_datarootdir_seen=yes;;
*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
  { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
  ac_datarootdir_hack='
  s&@datadir@&$datadir&g
  s&@docdir@&$docdir&g
  s&@infodir@&$infodir&g
  s&@localedir@&$localedir&g
  s&@mandir@&$mandir&g
    s&\\\${datarootdir}&$datarootdir&g' ;;
esac
_ACEOF

# Neutralize VPATH when `$srcdir' = `.'.
# Shell code in configure.ac might set extrasub.
# FIXME: do we really want to maintain this feature?
cat >>$CONFIG_STATUS <<_ACEOF
  sed "$ac_vpsub
$extrasub
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
s&@configure_input@&$configure_input&;t t
s&@top_builddir@&$ac_top_builddir_sub&;t t
s&@srcdir@&$ac_srcdir&;t t
s&@abs_srcdir@&$ac_abs_srcdir&;t t
s&@top_srcdir@&$ac_top_srcdir&;t t
s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
s&@builddir@&$ac_builddir&;t t
s&@abs_builddir@&$ac_abs_builddir&;t t
s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
s&@INSTALL@&$ac_INSTALL&;t t
$ac_datarootdir_hack
" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out

test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
  { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined.  Please make sure it is defined." >&5
echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined.  Please make sure it is defined." >&2;}

  rm -f "$tmp/stdin"
  case $ac_file in
  -) cat "$tmp/out"; rm -f "$tmp/out";;
  *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
  esac
 ;;
  :H)
  #
  # CONFIG_HEADER
  #
_ACEOF

# Transform confdefs.h into a sed script `conftest.defines', that
# substitutes the proper values into config.h.in to produce config.h.
rm -f conftest.defines conftest.tail
# First, append a space to every undef/define line, to ease matching.
echo 's/$/ /' >conftest.defines
# Then, protect against being on the right side of a sed subst, or in
# an unquoted here document, in config.status.  If some macros were
# called several times there might be several #defines for the same
# symbol, which is useless.  But do not sort them, since the last
# AC_DEFINE must be honored.
ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where
# NAME is the cpp macro being defined, VALUE is the value it is being given.
# PARAMS is the parameter list in the macro definition--in most cases, it's
# just an empty string.
ac_dA='s,^\\([	 #]*\\)[^	 ]*\\([	 ]*'
ac_dB='\\)[	 (].*,\\1define\\2'
ac_dC=' '
ac_dD=' ,'

uniq confdefs.h |
  sed -n '
	t rset
	:rset
	s/^[	 ]*#[	 ]*define[	 ][	 ]*//
	t ok
	d
	:ok
	s/[\\&,]/\\&/g
	s/^\('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p
	s/^\('"$ac_word_re"'\)[	 ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p
  ' >>conftest.defines

# Remove the space that was appended to ease matching.
# Then replace #undef with comments.  This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
# (The regexp can be short, since the line contains either #define or #undef.)
echo 's/ $//
s,^[	 #]*u.*,/* & */,' >>conftest.defines

# Break up conftest.defines:
ac_max_sed_lines=50

# First sed command is:	 sed -f defines.sed $ac_file_inputs >"$tmp/out1"
# Second one is:	 sed -f defines.sed "$tmp/out1" >"$tmp/out2"
# Third one will be:	 sed -f defines.sed "$tmp/out2" >"$tmp/out1"
# et cetera.
ac_in='$ac_file_inputs'
ac_out='"$tmp/out1"'
ac_nxt='"$tmp/out2"'

while :
do
  # Write a here document:
    cat >>$CONFIG_STATUS <<_ACEOF
    # First, check the format of the line:
    cat >"\$tmp/defines.sed" <<\\CEOF
/^[	 ]*#[	 ]*undef[	 ][	 ]*$ac_word_re[	 ]*\$/b def
/^[	 ]*#[	 ]*define[	 ][	 ]*$ac_word_re[(	 ]/b def
b
:def
_ACEOF
  sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS
  echo 'CEOF
    sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS
  ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in
  sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail
  grep . conftest.tail >/dev/null || break
  rm -f conftest.defines
  mv conftest.tail conftest.defines
done
rm -f conftest.defines conftest.tail

echo "ac_result=$ac_in" >>$CONFIG_STATUS
cat >>$CONFIG_STATUS <<\_ACEOF
  if test x"$ac_file" != x-; then
    echo "/* $configure_input  */" >"$tmp/config.h"
    cat "$ac_result" >>"$tmp/config.h"
    if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then
      { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
echo "$as_me: $ac_file is unchanged" >&6;}
    else
      rm -f $ac_file
      mv "$tmp/config.h" $ac_file
    fi
  else
    echo "/* $configure_input  */"
    cat "$ac_result"
  fi
  rm -f "$tmp/out12"
 ;;


  esac

done # for ac_tag


{ (exit 0); exit 0; }
_ACEOF
chmod +x $CONFIG_STATUS
ac_clean_files=$ac_clean_files_save


# configure is writing to config.log, and then calls config.status.
# config.status does its own redirection, appending to config.log.
# Unfortunately, on DOS this fails, as config.log is still kept open
# by configure, so config.status won't be able to write to it; its
# output is simply discarded.  So we exec the FD to /dev/null,
# effectively closing config.log, so it can be properly (re)opened and
# appended to by config.status.  When coming back to configure, we
# need to make the FD available again.
if test "$no_create" != yes; then
  ac_cs_success=:
  ac_config_status_args=
  test "$silent" = yes &&
    ac_config_status_args="$ac_config_status_args --quiet"
  exec 5>/dev/null
  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
  exec 5>>config.log
  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
  # would make configure fail if this is the last instruction.
  $ac_cs_success || { (exit 1); exit 1; }
fi


echo
echo
echo ZSNES v$VERSION
echo
echo "SDL support                   Version `$SDL_CONFIG --version`"
echo "NASM support                  `nasm -v`"
echo "zlib support                  Version $ZLIB_VERSION"
echo $ECHO_N "PNG support                   $ECHO_C"
if test x$with_libpng = xyes; then
  echo "${ECHO_T}Yes, version $LIBPNG_VERSION"
elif test x$enable_libpng = xno; then
  echo "${ECHO_T}Disabled by user"
else
  echo "${ECHO_T}Disabled, library not found"
fi
echo $ECHO_N "OpenGL support                $ECHO_C"
if test x$found_opengl = xyes; then
  echo "${ECHO_T}Yes"
elif test x$enable_opengl = xno; then
  echo "${ECHO_T}Disabled by user"
else
  echo "${ECHO_T}Disabled, library not found"
fi
echo $ECHO_N "JMA support                   $ECHO_C"
if test x$enable_jma = xno; then
  echo "${ECHO_T}Disabled by user"
else
  echo "${ECHO_T}Yes"
fi
echo $ECHO_N "ZSNES debugger                $ECHO_C"
if test x$enable_debugger = xno; then
  echo "${ECHO_T}Disabled"
else
  echo "${ECHO_T}Enabled"
fi
echo
echo The binary will be installed in $prefix/bin
echo
echo $ECHO_N "Configure complete, now type '$ECHO_C"
case x$target in
  *-*-*bsd*)
    echo $ECHO_N "${ECHO_T}g$ECHO_C"
    ;;
  *)
    ;;
esac
echo "${ECHO_T}make' and pray."
echo

Attachment: zsnes151src.tar.bz2
Description: BZip2 compressed data


[Index of Archives]     [GCC Help]     [Kernel Discussion]     [RPM Discussion]     [Red Hat Development]     [Yosemite News]     [Linux USB]     [Samba]

  Powered by Linux