Hi Lianbo, On Thu, Dec 14, 2023 at 02:49:54PM +0800, Lianbo Jiang wrote: > On 12/13/23 22:45, Aditya Gupta wrote: > > > Hi Lianbo, > > > > On Wed, Dec 13, 2023 at 03:20:40PM +0800, Lianbo Jiang wrote: > > > Hi, Aditya > > > > > > Thank you for the v3. > > > > > > I got a core dump after applying the patch[5], but I did not see the > > > backtrace from the core dump file. Could you please check it again? > > > > > > # ./crash > > > > > > crash 8.0.4++ > > > Copyright (C) 2002-2022 Red Hat, Inc. > > > Copyright (C) 2004, 2005, 2006, 2010 IBM Corporation > > > Copyright (C) 1999-2006 Hewlett-Packard Co > > > Copyright (C) 2005, 2006, 2011, 2012 Fujitsu Limited > > > Copyright (C) 2006, 2007 VA Linux Systems Japan K.K. > > > Copyright (C) 2005, 2011, 2020-2022 NEC Corporation > > > Copyright (C) 1999, 2002, 2007 Silicon Graphics, Inc. > > > Copyright (C) 1999, 2000, 2001, 2002 Mission Critical Linux, Inc. > > > Copyright (C) 2015, 2021 VMware, Inc. > > > This program is free software, covered by the GNU General Public License, > > > and you are welcome to change it and/or distribute copies of it under > > > certain conditions. Enter "help copying" to see the conditions. > > > This program has absolutely no warranty. Enter "help warranty" for details. > > > > > > GNU gdb (GDB) 10.2 > > > Copyright (C) 2021 Free Software Foundation, Inc. > > > License GPLv3+: GNU GPL version 3 or later > > > <http://gnu.org/licenses/gpl.html> > > > This is free software: you are free to change and redistribute it. > > > There is NO WARRANTY, to the extent permitted by law. > > > Type "show copying" and "show warranty" for details. > > > This GDB was configured as "powerpc64le-unknown-linux-gnu". > > > Type "show configuration" for configuration details. > > > Find the GDB manual and other documentation resources online at: > > > <http://www.gnu.org/software/gdb/documentation/>. > > > > > > For help, type "help". > > > Type "apropos word" to search for commands related to "word"... > > > > > > Segmentation fault (core dumped) > > Thanks for trying it. > > > > Was it 'crash-utility' which itself crashed due to the patches ? > Seems 'yes'. I did not see the same issue before applying the patchset. > > > > That is wierd, it should not cause any segmentation fault with the > > patches, can you please share the steps to reproduce this ? I will fix > > it. > > Sorry, I should describe the failure more details. It's easy to be > reproduced on my side. > > Step 1: applying these five patches > > Step 2: make lzo > > Step 3-1: for live debugging, crash tool will fail to load and get the > segfault. > > FYI: > > If the current feature doesn't support for live debugging, need to mention > that somewhere, at least this should not fail to load. > Thanks, fixed it now. Yes, this feature doesn't support live debug, since registers and other threads both are missing (atleast on ppc64). On ppc64, the pt_regs is NULL, which was accessed and caused the segmentation fault. Fixed it by skipping ppc64_get_cpu_reg call in case of live debug (return FALSE), and even if it's a vmcore still pt_regs is NULL somehow, skipped accessing that pt_regs and print a warning that registers are not available for the respective cpu. I will send it in V4. > > Step 3-2: for kdump case(vmcore) > > crash> gdb bt > #0 0xc000000000281298 in crash_setup_regs (gdb: invalid kernel virtual > address: fffffffffffffffb type: "gdb_readmem callback" > gdb: invalid kernel virtual address: fffffffffffffff7 type: "gdb_readmem > callback" > gdb: invalid kernel virtual address: fffffffffffffff3 type: "gdb_readmem > callback" > gdb: invalid kernel virtual address: fffffffffffffffb type: "gdb_readmem > callback" > gdb: invalid kernel virtual address: fffffffffffffff7 type: "gdb_readmem > callback" > gdb: invalid kernel virtual address: fffffffffffffff3 type: "gdb_readmem > callback" > oldregs=<optimized out>, newregs=0xc00000000c0f7908) at > ./arch/powerpc/include/asm/kexec.h:69 > #1 __crash_kexec (regs=<optimized out>) at kernel/kexec_core.c:975 > #2 0xfffffffffffffffb in ?? () > Backtrace stopped: previous frame inner to this frame (corrupt stack?) > crash> set gdb on > gdb: on > gdb> bt > #0 0xc000000000281298 in crash_setup_regs (oldregs=<optimized out>, > newregs=0xc00000000c0f7908) at ./arch/powerpc/include/asm/kexec.h:69 > #1 __crash_kexec (regs=<optimized out>) at kernel/kexec_core.c:975 > #2 0xfffffffffffffffb in ?? () > Backtrace stopped: previous frame inner to this frame (corrupt stack?) > gdb> info threads > Id Target Id Frame > 1 CPU 0 plpar_hcall_norets_notrace () at > arch/powerpc/platforms/pseries/hvCall.S:112 > 2 CPU 1 plpar_hcall_norets_notrace () at > arch/powerpc/platforms/pseries/hvCall.S:112 > 3 CPU 2 plpar_hcall_norets_notrace () at > arch/powerpc/platforms/pseries/hvCall.S:112 > 4 CPU 3 plpar_hcall_norets_notrace () at > arch/powerpc/platforms/pseries/hvCall.S:112 > 5 CPU 4 plpar_hcall_norets_notrace () at > arch/powerpc/platforms/pseries/hvCall.S:112 > 6 CPU 5 plpar_hcall_norets_notrace () at > arch/powerpc/platforms/pseries/hvCall.S:112 > 7 CPU 6 plpar_hcall_norets_notrace () at > arch/powerpc/platforms/pseries/hvCall.S:112 > * 8 CPU 7 0xc000000000281298 in crash_setup_regs (gdb: > invalid kernel virtual address: fffffffffffffffb type: "gdb_readmem > callback" > gdb: invalid kernel virtual address: fffffffffffffff7 type: "gdb_readmem > callback" > gdb: invalid kernel virtual address: fffffffffffffff3 type: "gdb_readmem > callback" > gdb: invalid kernel virtual address: fffffffffffffffb type: "gdb_readmem > callback" > gdb: invalid kernel virtual address: fffffffffffffff7 type: "gdb_readmem > callback" > gdb: invalid kernel virtual address: fffffffffffffff3 type: "gdb_readmem > callback" > oldregs=<optimized out>, newregs=0xc00000000c0f7908) at > ./arch/powerpc/include/asm/kexec.h:69 > gdb> info locals > No locals. > gdb> info args > oldregs = <optimized out> > newregs = 0xc00000000c0f7908 > gdb> Okay, I just recalled this is a known issue with the kernel code to save registers, and I fixed it in upstream linux, with the commit: commit b684c09f09e7a6af3794d4233ef785819e72db79 Author: Aditya Gupta <adityag@xxxxxxxxxxxxx> Date: Thu Jun 15 14:40:47 2023 +0530 powerpc: update ppc_save_regs to save current r1 in pt_regs Please bear with me for the long explaination. Basically before this commit, the coredump used to have `nip` (program counter) pointing to the latest function call, BUT `r1` (stack pointer) pointing at the 2nd latest function call. And due to this, actually crash's backtrace itself is slightly wrong. crash actually skips printing one topmost frame, and shows wrong instruction pointer for top frame In case of kdump, it skips 'crash_setup_regs''s activation frame, but that is not very noticeable since it's inlined in '__crash_kexec', I will use 'fadump's' example since it's easier to notice the issue there: Coming back to gdb mode. This is gdb's backtrace, for a fadump crash caused by 'echo c > /proc/sysrq-trigger': crash> gdb bt #0 0xc0000000000533f0 in crash_fadump (regs=0x0, str=0xc000000002bfc510 <buf> "sysrq triggered crash") at arch/powerpc/kernel/fadump.c:734 #1 0xc00000000727fba0 in ?? () This is crash's bt and registers, for the same crash: crash> bt PID: 32170 TASK: c00000000f82e500 CPU: 0 COMMAND: "bash" R0: c0000000000532d4 R1: """c00000000727fa90""" R2: c000000002b13000 ... NIP: c0000000000533f0 MSR: 8000000000001033 OR3: 0000000000000000 CTR: 0000000000000000 LR: c00000000002d430 XER: 0000000020040004 [NIP : crash_fadump+560] [LR : ppc_panic_event+96] #0 [c00000000727fa30] crash_fadump at c00000000005333c #1 ["""c00000000727fa90"""] ppc_panic_event at c00000000002d430 #2 [c00000000727fac0] atomic_notifier_call_chain at c000000000186d08 #3 [c00000000727fb00] panic at c0000000001492dc #4 [c00000000727fba0] sysrq_handle_crash at c00000000094ad98 #5 [c00000000727fc00] __handle_sysrq at c00000000094b8bc #6 [c00000000727fca0] write_sysrq_trigger at c00000000094c148 #7 [c00000000727fce0] proc_reg_write at c00000000063c78c #8 [c00000000727fd10] vfs_write at c00000000056a0e4 #9 [c00000000727fd60] ksys_write at c00000000056a694 crash> info reg r1 pc r1 0xc00000000727fa90 13835058055402224272 pc 0xc0000000000533f0 0xc0000000000533f0 <crash_fadump+560> Notice that the `pc` register is pointing to `crash_fadump`, but `r1` (ie. the stack pointer) is in the function activation frame of `ppc_panic_event`. GDB uses the `pc` register to get the function name, but reads other registers according to debuginfo of the function it got from `pc`. Since `pc` is in `crash_fadump`, it takes it's debuginfo, and let's say the debuginfo says to find register LR at +46 offset from `r1`, thinking `r1` will be the stack pointer of `crash_fadump`. But instead since `r1` is inside `ppc_panic_event`, it accesses `ppc_panic_event`'s frame, and due to this mismatch, it mostly reads some invalid value for the registers, and the unwinding fails. This is not due to gdb or the patch series, and instead was an issue with storing registers in the kernel itself Crash is not affected by this, since it simply reads the stack as an array, reading 0th offset from SP to get caller's SP (backchain), and 16th offset from SP to get LR. While gdb is trying to use some other function's (`crash_fadump`) debuginfo to some other function's (`ppc_panic_event`) frame while unwinding Sorry if it's confusing, I can explain the case of 'kdump' crash also if needed. And now about the invalid kernel virtual addresses, these are approaches to handle it in my case: 1. Suppress those warnings when called from gdb: One way is to suppress those messages while fetching registers, but this might be counterproductive if it hides any other invalid accesses 2. Checking if this issue of NIP and SP mismatch is there, and print message in gdb: I don't think we can even do that, since it's the kernel which gave us the wrong values, to gdb it's just a memory address, which it assumes is pointing to stack of some function, but all other values are random values (even considering that the stack has predefined format of where registers will be). Currently I am inclined to 2 if we have any ideas, or simply leave it as is, since the registers are invalid so gdb mode will anyways not work. Thanks, Aditya Gupta > > Thanks. > > Lianbo > > > > > > > > > # gdb /tmp/core.126506 > > > GNU gdb (GDB) Red Hat Enterprise Linux 10.2-12 > > > Copyright (C) 2021 Free Software Foundation, Inc. > > > License GPLv3+: GNU GPL version 3 or later > > > <http://gnu.org/licenses/gpl.html> > > > This is free software: you are free to change and redistribute it. > > > There is NO WARRANTY, to the extent permitted by law. > > > Type "show copying" and "show warranty" for details. > > > This GDB was configured as "ppc64le-redhat-linux-gnu". > > > Type "show configuration" for configuration details. > > > For bug reporting instructions, please see: > > > <https://www.gnu.org/software/gdb/bugs/>. > > > Find the GDB manual and other documentation resources online at: > > > <http://www.gnu.org/software/gdb/documentation/>. > > > > > > For help, type "help". > > > Type "apropos word" to search for commands related to "word"... > > > "0x7fffe9bd9b38s": not in executable format: file format not recognized > > > (gdb) file crash > > > Reading symbols from crash... > > > (gdb) bt > > > No stack. > > > > > The patches are not intended to apply to gdb as such, but to provide the feature > > to have backtrace in gdb mode inside crash-utility. > > > > But the message by gdb seems to say it couldn't read the dump file: > > > > > "0x7fffe9bd9b38s": not in executable format: file format not recognized > > I will try to cause a crash with upstream kernel and see if anything breaks. > > Will let you know. > > > > Thanks, > > Aditya Gupta > > > > > Thanks. > > > > > > Lianbo > > > > > > On 12/4/23 22:59, Aditya Gupta wrote: > > > > The Problem: > > > > ============ > > > > > > > > Currently crash is unable to show function arguments and local variables, as > > > > gdb can do. And functionality for moving between frames ('up'/'down') is not > > > > working in crash. > > > > > > > > Crash has 'gdb passthroughs' for things gdb can do, but the gdb passthroughs > > > > 'bt', 'frame', 'info locals', 'up', 'down' are not working either, due to > > > > gdb not getting the register values from `crash_target::fetch_registers`, > > > > which then uses `machdep->get_cpu_reg`, which is not implemented for PPC64 > > > > > > > > Proposed Solution: > > > > ================== > > > > > > > > Fix the gdb passthroughs by implementing "machdep->get_cpu_reg" for PPC64. > > > > This way, "gdb mode in crash" will support this feature for both ELF and > > > > kdump-compressed vmcore formats, while "gdb" would only have supported ELF > > > > format > > > > > > > > This way other features of 'gdb', such as seeing > > > > backtraces/registers/variables/arguments/local variables, moving up and > > > > down stack frames, can be used with any ppc64 vmcore, irrespective of > > > > being ELF format or kdump-compressed format. > > > > > > > > Implications on Architectures: > > > > ==================================== > > > > > > > > No architecture other than PPC64 has been affected, other than in case of > > > > 'frame' command > > > > > > > > As mentioned in patch #2, since frame will not be prohibited, so it will print: > > > > > > > > crash> frame > > > > #0 <unavailable> in ?? () > > > > > > > > Instead of before prohibited message: > > > > > > > > crash> frame > > > > crash: prohibited gdb command: frame > > > > > > > > Major change will be in 'gdb mode' on PPC64, that it will print the frames, and > > > > local variables, instead of failing with errors showing no frame, or showing > > > > that couldn't get PC, it will be able to give all this information. > > > > > > > > Testing: > > > > ======== > > > > > > > > Git tree with this patch series applied: > > > > https://github.com/adi-g15-ibm/crash/tree/stack-unwind-3 > > > > > > > > To test various gdb passthroughs: > > > > > > > > gdb> set > > > > gdb> set gdb on > > > > gdb> thread > > > > gdb> bt > > > > gdb> info threads > > > > gdb> info threads > > > > gdb> info locals > > > > gdb> info variables irq_rover_lock > > > > gdb> info args > > > > gdb> thread 2 > > > > gdb> set gdb off > > > > gdb> set > > > > gdb> set -c 6 > > > > gdb> gdb thread > > > > gdb> bt > > > > gdb> gdb bt > > > > gdb> frame > > > > gdb> up > > > > gdb> down > > > > gdb> info locals > > > > > > > > Known Issues: > > > > ============= > > > > > > > > 1. In gdb mode, 'bt' might fail to show backtrace in few vmcores collected > > > > from older kernels. This is a known issue due to register mismatch, and > > > > its fix has been merged upstream: > > > > > > > > Commit: https://github.com/torvalds/linux/commit/b684c09f09e7a6af3794d4233ef785819e72db79 > > > > > > > > Fixing GDB passthroughs on other architectures > > > > ============================================== > > > > > > > > Much of the work for making gdb passthroughs like 'gdb bt', 'gdb > > > > thread', 'gdb info locals' etc. has been done by the patches introducing > > > > 'machdep->get_cpu_reg' and this series fixing some issues in that. > > > > > > > > Other architectures should be able to fix these gdb functionalities by > > > > simply implementing 'machdep->get_cpu_reg (cpu, regno, ...)'. > > > > > > > > The reasoning behind that has been explained with a diagram in commit > > > > description of patch #1 > > > > > > > > I will assist with my findings/observations fixing it on ppc64 whenever needed. > > > > > > > > Additional Notes: > > > > ================= > > > > > > > > Sorry, it took a long time to send this version. Tried fixing 'info > > > > threads' but wasn't able to. Gave it time again, and was able to fix it > > > > this time after multiple days of debugging. > > > > > > > > Some other things from last version review: > > > > > > > > * 'info rv' not working: > > > > It's not supported in gdb, instead we need to use 'info locals rv' or > > > > 'info variables rv' > > > > > > > > * 'info variables' command hangs... and prints nothing after hanging for long > > > > It likely hangs due to a lot of symbols being there, and it's trying to > > > > get all gdb's output and page it, so Control+C messes it up, but if we pass > > > > a regex filter to limit the output, eg. info variables rq, then it doesn't > > > > hang, and prints the variables/symbols. > > > > Even with gdb, ie. simply running 'gdb vmlinux vmcore' also hangs due > > > > to the lot of symbols > > > > > > > > * making crashing thread as default in gdb: > > > > This is implemented now, along with synchronising crash & gdb contexts, in > > > > patch #3 > > > > > > > > * 'info threads' not working: > > > > This turned to be due to a bug in gdb_interface. I fixed 'info > > > > threads' in 2 patches, to simplify it, first for the gdb_interface, > > > > and another patch for setting the context correctly in crash > > > > > > > > * other info commands: > > > > I tested all the info commands, in crash along with this patch. > > > > Most of those that fail in crash are due to gdb itself not supporting > > > > them with vmcores, and other than that is the 'info pretty' command, > > > > which might not be needed in crash anyways > > > > > > > > * live debugging showing only one thread: > > > > I tried it with crash, crash shows only the current thread, ie. > > > > itself, so it does not have information of registers for the other > > > > CPUs. Similarly gdb does not support live kernel debugging (without > > > > connecting to a gdbstub/QEMU etc.). > > > > If you need I can make it show the current thread id correctly for > > > > the one thread, but I don't think it might help much with live > > > > debugging > > > > > > > > Hope, I set the context, thanks for the reviews, I replied and worked > > > > on your suggestions, but got stuck there due to 'info threads' > > > > > > > > Changelog: > > > > ========== > > > > > > > > V3: > > > > + default gdb thread will be the crashing thread, instead of being > > > > thread '0' > > > > + synchronise crash cpu and gdb thread context > > > > + fix bug in gdb_interface, that replaced gdb's output stream, losing > > > > output in some cases, such as info threads and extra output in info > > > > variables > > > > + fix 'info threads' > > > > > > > > RFC V2: > > > > - removed patch implementing 'frame', 'up', 'down' in crash > > > > - updated the cover letter by removing the mention of those commands other > > > > than the respective gdb passthrough > > > > > > > > Aditya Gupta (5): > > > > ppc64: correct gdb passthroughs by implementing machdep->get_cpu_reg > > > > remove 'frame' from prohibited commands list > > > > synchronise cpu context changes between crash/gdb > > > > fix gdb_interface: restore gdb's output streams at end of > > > > gdb_interface > > > > fix 'info threads' command > > > > > > > > crash_target.c | 44 ++++++++++++++++ > > > > defs.h | 130 +++++++++++++++++++++++++++++++++++++++++++++++- > > > > gdb-10.2.patch | 110 +++++++++++++++++++++++++++++++++++++++- > > > > gdb_interface.c | 2 +- > > > > kernel.c | 47 +++++++++++++++-- > > > > ppc64.c | 95 +++++++++++++++++++++++++++++++++-- > > > > task.c | 14 ++++++ > > > > tools.c | 2 +- > > > > 8 files changed, 434 insertions(+), 10 deletions(-) > > > > > -- Crash-utility mailing list -- devel@xxxxxxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to devel-leave@xxxxxxxxxxxxxxxxxxxxxxxxxxx https://${domain_name}/admin/lists/devel.lists.crash-utility.osci.io/ Contribution Guidelines: https://github.com/crash-utility/crash/wiki
